References
[1]. Holmberg, K., and Matthews A, (1998). Coating
Tribology: Properties, Techniques and Applications in
Surface Engineering. Elsevier Science B.V., Netherlands.
[2]. Leite, M.V, Figueroa, C.A, Gallo, S. C, Rovani, A.C,
Basso, R.L.O, Mei, P.R, Baumvol, I.J.R, and Sinatora A,
(2010). “Wear Mechanisms and Microstructure of Pulsed
Plasma Nitrided AISI H13 Tool Steel”. Wear, Vol. 269, pp. 466-
472.
[3]. Jawing, X. J., Peng, Q., Fan, H., Wang, Y., Li, G., and
Shen, B. (2009). “Effects of DC Plasma Nitriding Parameter on Microstructure and Properties of 304L Stainless Steel”.
Material Characterization, Vol. 60, pp.197-203.
[4]. Lal, D.M., Renganarayanan, S., and Kalanidhi, A.
(2001). “Cryogenic Treatment to Augment Wear
Resistance of Tool and Die Steel”. Cryogenics, Vol. 41, pp.
149-155.
[5]. Barron, R.F. (1973). “Effects of Cryogenic Treatment on
Lath Tool Wear”. Progress in Refrigeration Science and
Technology. Publishing Co., Westport, Vol.1, pp.529-534.
[6]. Roberts, G. (1998). Tools Steels. ASM International,
th Materials Park, OH, USA, 5 edition, pp.46-66.
[7]. Totten, G.E. (2006). Steel Heat Treatment Handbook
(Metallurgy and Techniques). Taylor & Francis, UK.
[8]. Molinari, A., Pellizzari, M., Gialanella, S., Straffelini, G.,
and Stiasny, K.H. (2001). “Effect of Deep Cryogenic
Treatment on the Mechanical Properties of Tool Steels”.
Material Processing Technology, Vol. 118, pp. 350-355.
[9]. Das, Debdulal. Dutta, A. K., and Ray, K. K. (2010). “Sub-
Zero Treatments of AISI D2 Steel: Part I. Microstructure and
Hardness”. Materials Science and Engineering, Vol. 527,
pp. 2182-2193.
[10]. Amini, K., Nategh, S., and Shafyei, A. (2010).
“Influence of Different Cryo-treatments on Tribological
Behavior of 80CrMo12 5 Cold Work Tool Steel”. Materials
and Design, Vol. 31, pp. 4666-4675.
[11]. Gill, S.S., Singh, J., Singh, R., and Singh, H. (2012).
“Effect of Cryogenic Treatment on AISI M2 High Speed
Steel: Metallurgical and Mechanical Characterization”.
JMEPEG, Vol. 21, pp. 1320-1326. DOI: 10.1007/s11665-
011-0032-z.
[12]. Mehtedi, M. E., Ricci, P., Drudi, L., Mohtadi, S. E.,
Cabibbo, M., and Spigarelli, S. (2012). “Analysis of the
Effect of Deep Cryogenic Treatment on the Hardness and
Microstructure of X30 Cr Mo N 15 1 Steel”. Materials and
Design, Vol. 33, pp. 136-144.
[13]. Fanju, M., Kohsuke, T., Ryo, A., and Hidea, K. (1994).
“Role of ?-Carbide Precipitation in the Wear Resistance
Improvement of Fe-12Cr-Mo- V-1.4C Tool Steel by the
Cryogenic Treatment”. ISI Journal International, Vol. 34, No.
2, pp. 205-210.
[14]. Collins, D.N. (1996). “Deep Cryogenic Treatment of Tool Steels: Review”. Heat Treatment of Metals, Vol. 2, pp.
40-42.
[15]. Straffenlini, G., Bizzotto, G., and Zanon, V. (2010).
“Improving the Wear Resistance of Tools for Stamping”.
Wear, Vol. 269, pp. 693-697.
[16]. Silva, F.J., Franco, S.D., Machado, A.R., Ezugwu, E.O.,
and Soozajr, A.M. (2006). “Performance of Cryogenically
Treated HSS Tools”. Wear, Vol. 261, pp. 674-85.
[17]. Firouzdor, V., Nejati, E., and Khomamizad, F. (2008).
“Effect of Deep Cryogenic Treatment on Wear Resistance
and Tool Life of M2 HSS Drill”. Journal of Material Process
Technology, Vol. 206, pp. 467-72.
[18]. Yun, D., Xiaoping, L., and Hongshen, X. (1998). “Deep
Cryogenic Treatment of a High Speed Steels and its
Mechanism”. Heat Treatment of Metals, pp. 55-59.
[19]. Huang, Y., Zhu, Y.T., Liao, X.Z., Beyerlein, I.J., Bourlce,
M.A., and Mitchell, T.E. (2003). “Microstructure of
Cryogenic Treated M2 Tool Steel”. Material Science and
Engineering A, Vol. 339, pp. 241-244.
[20]. Gogte, C.L., Iyer, K.M., Paretka, R.K., and Peshwe,
D.R. (2009). “Deep Subzero Processing of Metals and Alloys:
Evolution of Microstructure of AISI T42 Tool Steel”. Materials
and Manufacturing Processes, Vol. 24(7&8), pp. 718-722.
[21]. ASTM E 415-2014. (2014). “Standard Test Method for
Analysis of Carbon and Low Alloy Steel by Spark Atomic
Emission Spectrometry”. ASTM Annual Book of Standards,
West Conshohocken, PA, United States.
[22]. Bayer, A.M., Vasco, T., and Walton, L.R. (1995).
Properties and Selection: Iron, Steels and High
Performance Alloys, ASM Handbook Vol. 1. ASM
rd International, Materials Park, OH, USA, 3 edition, pp. 770.
[23]. ASTM E08-08, (2009). “Standard Test Method for
Tension Testing of Metallic Materials”. ASTM Annual Book of
Standard's, Vol. 3.01, West Conshohocken, PA, United
States.
[24]. ASTM E23-07a, (2009). “Standard Test Method for
Notched Bar Impact Testing of Metallic Materials”. ASTM
Annual Book of Standard's, Vol. 3.01, West Conshohocken,
PA, United States.
[25]. ASTM E3-01 (Reapproved 2007), (2009). “Standard
Guide for Preparation of Metallographic Specimens”. ASTM Annual Book of Standards, Vol. 3.01, West Conshohocken,
PA, United States.
[26]. ASTM E384-08a, (2009). “Standard Test Method for
Micro Indentation Hardness of Materials”. ASTM Annual
Book of Standard's, Vol. 3.01, West Conshohocken, PA,
United States,
[27]. Koneshlou, M., Meshinchi, K., and Khomamizadeh, F. (2011). “Effect of Cryogenic Treatment on Microstructure,
Mechanical and Wear Behaviors of AISI H13 Hot Work Tool
Steel”. Cryogenics, Vol. 51, pp. 55-61.
[28]. Li, S., Xie, Y., and Wu, X. (2010). “Hardness and
Toughness Investigations of Deep Cryogenic Treated Cold
Work Die Steel”. Cryogenics, Vol. 50, pp. 89-92.
