References
[1]. Sedra, A.S., and Smith, K.C. (2004). Microelectronic
Circuits, Sedra. New York: Oxford University Press.
[2]. Lakys, Y., Fabre, A., and Godarra, B. (2009). “Cognitive
and Encrypted Communications, Part 2: 'A New Approach
to Active Frequency-Agile Filters and Validation Results for
an Agile Bandpass Topology in SiGe-BiCMOS”. Retrieved
from http://dx.doi.org/10.1109/ELECO.2009.5355002
[3]. Lakys, Y., and Fabre, A. (2010a). “Shadow filters-new
family of second-order filters”. Electron. Lett. Electronics
Letters, Vol. 46, No. 4, pp. 276-277.
[4]. Lakys, Y., and A. Fabre, (2010b). “Shadow Filters
th Generalisation to Nth -class”. Electron. Lett. Electronics
Letters, Vol. 46, No. 14, pp. 985-986.
[5]. Lakys, Y., and Fabre, A. (2011). “A Fully Active Frequency
Agile Filter for Multistandard Transceivers”. International
Conference on Applied Electronics, pp. 1-7.
[6]. Lakys, Y., and Fabre, A. (2012). “Multistandard transceivers:
State-of-the-art and a new versatile implementation for fully
active frequency agile filters”. Analog Integrated Circuits
and Signal Processing Analog Integr Circ. Sig. Process, Vol.
74, No. 1, pp. 63-78.
[7]. Alaybeyoglu, E., and Kuntman, H. (2015). “A new VDTA
based frequency agile filter”. 2015 9th International
Conference on Electrical and Electronics Engineering
(ELECO).
[8]. Alaybeyoglu, E., and Kuntman, H. (2016). “A new
frequency agile filter structure employing CDTA for
positioning”. Retrieved from http://link.springer.com/
article/10.1007/s 10470-016-0770-9?view=classic
[9]. Ghallab, Y., Badawy, W., Kaler, K., El-Ela, M.A., and El-
Said, M. (2002a). “A new second-order active universal filter
with single input and three outputs using operational
floating current conveyor”. The 14th International Conference
on Microelectronics.
[10]. Ghallab, Y., El-Ela, M.A., and Elsaid, M. (2002b). “A
novel universal voltage-mode filter with three inputs and
single output using only two operational floating current conveyor”. ICM 2000. Proceedings of the 12th International Conference on Microelectronics.
[11]. Ghallab, Y., and Badawy, W. (2004). “A new differential
ph sensor current mode read out circuit using only two
operational floating current conveyor”. IEEE International
Workshop on Biomedical Circuits and Systems, 2004.
[12]. Ghallab, Y., Badawy, W., Kaler, K., and Maundy, B.
(2005). “A Novel Current-Mode Instrumentation Amplifier
Based on Operational Floating Current Conveyor”. IEEE
Trans. Instrum. Meas. IEEE Transactions on Instrumentation
and Measurement, Vol. 54, No. 5, pp. 1941-1949.
[13]. Ghallab, Y.H., Badawy, W., El-Ela, M.A., and El-Said,
M.H. (2006). “The operational floating current conveyor
and its applications”. Journal of Circuits, Systems and
Computers J Circuit Syst Comp, Vol. 15, No. 3, pp. 351-372.
[14]. Ghallab, Y., and Badawy, W. (2006). “A new topology
for a current-mode wheatstone bridge”. IEEE Transactions
on Circuits and Systems II: Express Briefs IEEE Trans. Circuits
Syst. II, Vol. 53, No. 1, pp. 18-22.
[15]. Pandey, N., Nand, D., and Khan, Z. (2013). “Single-
Input Four-Output Current Mode Filter Using Operational
Floating Current Conveyor”. Active and Passive Electronic
Components, pp. 1-8.
[16]. Pandey, N., Nand, D., and Khan, Z. (2014). “Operational
Floating Current Conveyor-Based Single-Input Multiple-
Output Transadmittance Mode Filter”. Arab J Sci Eng
Arabian Journal for Science and Engineering, Vol. 39, No.
11, pp. 7991-8000.
[17]. Pandey, N., Pandey, R., Nand, D., and Kumar, A.
(2014a). “Current-mode rectifier configuration based on
OFCC”. 2014 International Conference on Signal
Propagation and Computer Technology (ICSPCT 2014).
[18]. Pandey, N., Tripathi, P., Pandey, R., and Batra, R.
(2014b). “OFCC based logarithmic amplifier”. 2014
International Conference on Signal Processing and
Integrated Networks (SPIN).
[19]. Pandey, N., Pandey, R., and Nand, D. (2016a).
“Generalised operational floating current conveyor based
instrumentation amplifier”. IET Circuits, Devices & Systems,
Vol. 10, No. 3, pp. 209-219.
[20]. Pandey, N., Nand, D., Kumar, V.V., Ahalawat, V.K., and Malhotra, C. (2016b). “Realization of OFCC based
Transimpedance Mode Instrumentation Amplifier”. IEEE
Advances in Electrical and Electronic Engineering, Vol. 14,
No. 2.
[21]. Hassan, H. M., and Soliman, A. M. (2005). “Novel
Cmos Realizations of the Operational Floating Conveyor
and Applications”. Journal of Circuits, Systems and
Computers J Circuit Syst Comp, Vol. 14, No. 6, pp. 1113-
1143.
[22]. Roy, S.D. (2010). “'Shadow' Filters-A New Family of
Electronically Tunable Filters”. IETE Journal of Education, Vol.
51, No. 2-3, pp. 75-78.
[23]. Abuelma'atti, M. T., and Almutairi, N. (2016). “New
voltage-mode bandpass shadow filter”. 2016 13th
International Multi-Conference on Systems, Signals & Devices (SSD).
[24]. Atasoyu, M., Kuntman, H., Metin, B., Herencsar, N.,
and Cicekoglu, O. (2015). “Design of current-mode class 1
frequency-agile filter employing CDTAs”. 2015 European
Conference on Circuit Theory and Design (ECCTD).
[25]. Upadhyay, and Anshika, (2014). “Shadow Filter for
Orthogonal Modification of Center Frequency and
Bandwidth with Constant Q Factor”. 2014 UKSim-AMSS 16th
International Conference on Computer Modelling and
Simulation (2014): n. pag. Web.
[26]. Wang, Z. (1990). “2-MOSFET transresistor with
extremely low distortion for output reaching supply
voltages”. Electron. Lett. Electronics Letters, Vol. 26, No. 13,
pp. 951-952.
