References
[1]. Bhim Singh, Kamal Al-Haddad and Ambrish Chandra,
(1999). “A New Control Approach to 3-phase Active Filter for
Harmonics and Reactive Power Compensation”. IEEE Trans.
on Power Systems, Vol. 46, No. 5, pp.133-138.
[2]. W. K. Chang, W. M. Grady, Austin, and M. J. Samotyj,
(1994). “Meeting IEEE-519 Harmonic Voltage and Voltage
Distortion Constraints with an Active Power Line
Conditioner”. IEEE Trans on Power Delivery, Vol. 9, No. 3, pp.
1531-1537.
[3]. Hirofumi Akagi, (1994). “Trends in Active Power Line
Conditioners”. IEEE Trans on Power Electronics, Vol.9, No.3,
pp. 263-268.
[4]. S.K. Meeravali, and K. Chandrasekhar, (2015). “Power
Quality Enhancement using Multi-Level Cascaded HBridge
Based D-STATCOM with IRP Theory”. International
Electrical Engineering Journal (IEEJ), Vol. 6, No. 2, pp. 1756-
1764.
[5]. O. Anaya-Lara, and E. Acha, (2002). “Modeling and
Analysis of Custom Power Systems by PSCAD/EMTDC”. IEEE
Trans. Power Delivery, Vol. 17, No. 1, pp. 266-272.
[6]. S.V. Ravi Kumar, and S. Sivanagaraju, (2007).
“Simualgion of D-Statcom and DVR in Power System”. ARPN
Journal of Engineering and Applied Science, Vol. 2, No. 3,
pp. 7-13.
[7]. Noramin Ismail, and Wan Norainin Wan Abdullah,
(2010). “Enhancement of Power Quality in Distribution
th System using D-STATCOM”. The 4 International Power
Engineering and Optimization Conference (PEOCO2010), Shah Alam, Selangor, Malaysia. pp. 23-24.
[8]. G. Venkataramana, and B. Johnson, (1997). “A Pulse
Width Modulated Power Line Conditioner for Sensitive Load
Centers”. IEEE Trans. Power Delivery, Vol. 12, No. 2, pp. 844-849.
[9]. Rosli Omar, Nasrudin Abd Rahim and Mazizan
Sulaiman, (2008). “Modeling and Simulation for Voltage
Sags/Swells Mitigation using Dynamic Voltage Restorer
(DVR)”. Journal of Theoretical and Applied Information
Technology, pp. 464-470.
[10]. Bhattacharya Sourabh, (2012). “Applications of
DSTATCOM using MATLAB/Simulation in Power System”.
Research Journal of Recent Sciences, Vol. 1, pp. 430-433.
[11]. Rodda Shobha Rani, and B. Jyothi, (2011). “VSC
Based DSTATCOM & Pulse-Width Modulation for Power
Quality Improvement”. International Journal of Engineering
Trends and Technology, Vol. 2, No. 2, pp. 38-41.
[12]. M. Mohammadi, and M. Akbari Nasab, (2011).
“Voltage Sag Mitigation with D-STATCOM in Distribution
Systems”. Australian Journal of Basic and Applied Sciences,
Vol. 5, No. 5, pp. 201-207.
[13]. Zhang Bao-hui, Wang Li-yong, Zhang Wen-hao, Zhou
De-cai, Yao Feng, Ren Jin-feng, Xie Han, and Yu Gangliang,
(2005). “Implementation of Power System Security
and Reliability Considering Risk Under Environment of
Electricity Market”. IEEE/PES Transmission and Distribution
Conference & Exhibition: Asia and Pacific Dalian, China.
[14]. Ignacio Hernando-Gil,Irinel-Sorin Ilie, and Sasa Z.
Djokic, (2016). “Reliability Planning of Active Distribution
Systems Incorporating Regulator Requirements and
Network-reliability Equivalents”. IET Gener. Transm. Distrib.,
Vol. 10, No. 1, pp. 93-106.
