i-manager Publications

Composite Power System Reliability Evaluation Using Monte Carlo Methods – A Comparative Study

V. Madhusudhan*, V. Sankar**

*Professor in EEE ,KSRM College of Engineering Kadapa,A.P.,India.

**Professor in EEE ,JNTU College of Engineering Anantapur,A.P.,India.

Periodicity:May - July'2007
DOI : https://doi.org/10.26634/jfet.2.4.795

Abstract

Adequacy assessment of composite power system is a complex task, which involves the two aspects of power system analysis and practical considerations in selecting a system state. Monte Carlo Simulation is a technique currently used for power system composite reliability assessment due to its flexibility and the possibility of obtaining the probability distribution of variables of interest. In the present paper, three basic sampling techniques are employed using Monte Carlo Simulation and the Reliability Indices are computed for a 5-Bus Composite Power System and IEEE RTS 24-Bus System. The results are compared and discussed.

Keywords

Composite Power System, Reliability Indices, Monte Carlo Simulation, and Sampling Approach.

How to Cite this Article?

V. Madhusudhan and V. Sankar (2007). Composite Power System Reliability Evaluation Using Monte Carlo Methods – A Comparative Study. i-manager’s Journal on Future Engineering and Technology, 2(4), 39-49. https://doi.org/10.26634/jfet.2.4.795

References

[1]. A. D. Patton, "A probability method for Bulk power system security assessment - Development of Probability Methods for normally operating Components", IEEE Trans, on PAS, Vol. PAS -91, No.6, Nov/Dec 1972, pp 2480-2485.

[2]. R. Billinton, S. Kumar, "Pertinent factors in the Adequacy Assessment of a Composite Generation and Transmission System", Trans, of CEA, Engineering and Operating Division, Vol. 25, Part 3, paper 86-SP-141, Toronto, 1986.

[3]. J. Batut, J. Boisseau, E. Bourgade, M. Monti, "Different Approaches to Reliability as Applied to the Generation Transmission System and its Components." Int. Journal of Electrical Power and Energy Systems, Vol. 10, No.3, July 1988, pp. 168-1 73.

[4]. M. R Bhavaraju, "Composite System Reliability Evaluation", Int. Journal of Electric Power and Energy Systems, Vol. 10, No.3, July 1988, pp.l 74-179.

[5]. S. Kumar, R.Billinton, "Adequacy Equivalents in Composite Power System Evaluation", IEEE Trans, on PWRS, Vol.PWRS-3, No.3, Aug. 1988, pp. 1167-1173.

[6]. R. Billinton, S. Kumar, "Indices for Use in Composite Generation and Transmission System Adequacy Evaluation", Electrical Power and Energy Systems Journal, Vol. 12, No.3, July 1990, pp. 146-155.

[7]. R.Billinton, E. Khan, "Contingency Selection in Composite System Adequacy Assessment", IEEE paper No.90 SM 476-2 PWRS, IEEE Summer Power Meeting, Minneapolis, July, 1990.

[8]. R. Billinton, A. Jonnavithula, "Composite System Adequacy Assessment Using sequential Monte Carlo Simulation with variance Reduction Techniques", IEE Proceedings: Generation, Transmission and Distribution, Vol. 144, No. 1, Jan. 1997, pp. 1 -6.

[9]. Armando M. Leite da Silva, A. da Fonseca Manso, George J, Anders, "Composite Reliability Evaluation for Large-scale Power Systems" IEEE Bologna Power Tech Conference, June, 2003.

[10]. Roy Billinton, Wijarn Wangdee, "Delivery Point Reliability Indices of a Bulk Electric System Using Sequential Monte Carlo Simulation", IEEE Trans, on Power Delivery, Vol. 21, No. 1, January 2006, pp. 345-352.

Composite Power System Reliability Evaluation Using Monte Carlo Methods – A Comparative Study

Abstract

Keywords

How to Cite this Article?

References

If you have access to this article please login to view the article or kindly login to purchase the article

Purchase Instant Access

Options for accessing this content:

	North Americas,UK, Middle East,Europe		India	Rest of world
	USD	EUR	INR	USD-ROW
Pdf	35	35	200	20
Online	35	35	200	15
Pdf & Online	35	35	400	25