References
[1]. Asian Development Bank, "Power systems efficiency through loss reduction and Load Management", Proceedings of the Regional conference on power systems efficiency through loss reduction and Load Management, 1985.
[2]. J.J.Grainger and S.H.Lee, "Optimum size and location of shunt capacitors for reduction of losses on distribution feeders", IEEE Trans, on Power Apparatus and Systems, Vol.l 00, pp.l 105-1116, March 1982.
[3]. S.H.Lee and JJ. Grainger, "Optimum placement of fixed and switched capacitors on primary distribution feeders", IEEE Trans, on Power Apparatus and Systems, Vol. 100, pp. 345-352, January 1981.
[4]. J.J.Graingerand S.H.Lee, "Capacity release by shunt capacitor placement on distribution feeders: A new voltage dependent model", IEEE Trans, on Power Apparatus and Systems, Vol. 100, pp.l236-1244, May 1982.
[5]. JJ.Grainger, S.Civanlar and S.H.Lee, "Optimal design and control scheme for capacitive compensation of distribution feeders: A new voltage dependent model", IEEE Trans, on Power Apparatus and Systems, Vol.l 02, pp.3271 -3278, October 1983.
[6]. H.D.Chiang, J.C.Wang, O.Cockings and H.D.Shin, "Optimal capacitor placements in distribution systems", Part-1 and Part-ll, IEEE Trans, on Power Delivery, Vol,5, pp. 634-649, January 1990.
[7]. S.Sundharrajan and A.Pahwa," Optimal selection of capacitors for radial distribution systems using a genetic algorithm", IEEE Trans, on Power Systems. Vol.9, pp.1499- 1507, August 1994.
[8]. S. Sivanagaraju, M.S.Giridhar, E.Jagadeesh Babu, and Y.Srikanth, "A novel load flow technique for radial distribution system". National Power System Conference, NPSC-2,2004, IIT, Chennai, India, pp. 140-144.
[9]. D. Das, et.al, "Novel method for solving redial distribution Networks", IEE Proc.-C, Vol. 141, No. 4, pp. 291 - 298, July 1994.
[10]. M.E. Baran and F.F. Wu, "Optimal sizing of capacitor placed on a radial distribution system", IEEE Trans, on Power Delivery, 1989, PWRD-2, pp. 735-743.