i-manager Publications

Development of Optimized ANN Model Through Genetic Algorithm to Predict the Microstructural Parameters of Aluminum Alloy Castings

D. Hanumantha Rao*, G.R.N. Tagore**, G. Ranga Janardhana***

* Professor, Mechanical Engineering Department, Deccan college of Engineering and Technology, Hyderabad.

** Professor & Head, Department of Mechanical Engineering, National Institute of Technology, Warangal.

***Professor of Mechanical Engineering In JNTU.

**** Professor and head of Automotive Engineering Department, Hoseo University, South Korea.

Periodicity:November - January'2008
DOI : https://doi.org/10.26634/jfet.3.2.678

Abstract

The chemical, mechanical, and physical properties of cast metal products are greatly determined by the microstructure formed during solidification. Microstructural parameter Secondary Dendrite Arm Spacing (SDAS) has been observed to have a significant impact upon the yield strength, ultimate tensile strength and elongation of cast products. A comprehensive model which can predict the SDAS values, will allow the aluminum industry to effectively troubleshoot, develop and improve different alloys. In the present investigation, a hybrid Artificial Neural Network (ANN) — Genetic Algorithm (GA) model is developed for predicting the SDAS values in aluminum alloy castings. Adaptation and optimization of network weights using GA is proposed as a mechanism to improve the performance of ANN model. The process parameters considered for predicting SDAS values are: chill volume heat capacity, insulation on riser and pouring temperature. Solidification simulations are carried out using finite difference method for obtaining the data in order to develop the ANN model. The proposed model is validated experimentally.

Keywords

Secondary Dendrite Arm Spacing, Artificial Neural Network, Genetic Algorithm, Solidification simulations.

How to Cite this Article?

D. Hanumantha Rao, G.R.N. Tagore, G.Ranga Janardhana and Kim S Kun (2008). Development of Optimized ANN Model Through Genetic Algorithm to Predict the Microstructural Parameters of Aluminum Alloy Castings. i-manager’s Journal on Future Engineering and Technology, 3(2), 55-62. https://doi.org/10.26634/jfet.3.2.678

References

[1 ]. B. Zhang et al, "Study of Dendrite Arm Spacing (DAS) In Cylinder Heads Produced by Gravity Casting with Different Aluminium Alloys"- la metallurgia, italiana, June 2005, pp49-55.

[2]. John Campbell, 'Castings'. Butterworth-Heinemann ltd.

[3]. Hybrid Artificial Neural Network-Genetic Algorithm Technique for Modeling And Optimization of Plasma Reactor - Istadi and N. A. S. Amin, Ind. Eng. Chem. Res. 2006,45,6655-6664.

[4]. F. Mampaey, 'Practical Examples Using the Finite Volume method for Simulating the Casting Process' AFS Transactions 01-075.

[5]. Merton C. Flemings, "Solidification Processing".

[6]. L. Davis, "Mapping Classifier Systems into Neural Networks," to appear in Proceedings of the 1988 Conference on Neural Information Processing Systems, Morgan Kaufmann,

[7]. Fu Limin 1994, Neural networks in Computer Intelligence, McGraw Hill Inc.

[8]. Neural Networks, Fuzzy logic and Genetic Algorithms- Synthesis and Applications"-S.Rajasekharan & G.A.Vijayalakhmi Pai.- Prentice-Hall of India Pvt.Ltd.,2004.

[9]. Jiju antony, "Design of experiments for engineers and scientists"-, Butterworth Heinemann, Burlington, 2003, pp2-3.

[10]. X.U. Qingyan, LIU Baicheng, 'Numerical Modeling of Dendrite Growth in Al Alloys'- Tsinghu science and technology-Vol. 9, Number5, Oct 2005.

[11]. D.Hanumantharao, G.R.N.Tagore, G.Ranga Janardhana, ""Process simulation of aluminum alloy casting solidification for controlled porosity and cooling rate" Indian Foundry Journal' May 2005,Vol.52 pp26- 34NO.5.

[12]. David M. Skapura, "Building neural networks", ACM press, Addision-Wesly Publishing Company, pp31 -32,

[13], D. E. Rumelhart G. E. Hinton and R. J. Williams, \Learning Internal Representations by Error Propagation, in Parallel Distributed Processing, vol. 1, MIT Press, Cambridge, MA, 1986.

[14]. L. Davis, Genetic Algorithms and Simulated Annealing, Pitman, London, 1987.

[15], D. Hanumantharao, G.R.N.Tagore, G.Ranga Janardhana, "Solidification simulations coupled with neural networks for prediction of secondary dendrite arm spacing in sand castings", i-manager's Journal on Engineering & Technology, Aug-Oct' 2006,Vol,2, Nol, pp42-49.

	North Americas,UK, Middle East,Europe		India	Rest of world
	USD	EUR	INR	USD-ROW
Pdf	35	35	200	20
Online	35	35	200	15
Pdf & Online	35	35	400	25

Development of Optimized ANN Model Through Genetic Algorithm to Predict the Microstructural Parameters of Aluminum Alloy Castings

Abstract

Keywords

How to Cite this Article?

References

If you have access to this article please login to view the article or kindly login to purchase the article

Purchase Instant Access

Options for accessing this content: