References
[1]. Bal Mukund Sharma and Kuldeep Sahay, (2014). “A
Comprehensive Survey of Maximum Power Tracker
Techniques for Photovoltaic System”. i-manager's Journal
on Electrical Engineering. Vol. 8(1) Jul-Sep 2014, Print ISSN
0973-8835, E-ISSN 2230-7176, pp. 39-55.
[2]. K.H. Hussein, I. Muta, T. Hoshino, and M. Osakada,
(1995). “Maximum photovoltaic power tracking: An
algorithm for rapidly changing atmospheric conditions”.
Generation, Transmission and Distribution, IEEE
Proceedings, Vol. 142, No. 1, pp. 59 - 64.
[3]. Trishan Esram, and Patrick L. Chapman, (2007).
“Comparison of Photovoltaic Array Maximum Power Point
Tracking Techniques”. IEEE Transactions on Energy
Conversion, Vol. 22, No. 2, pp. 439-449.
[4]. R. Faranda, S. Leva, and V. Maugeri, (2008). “MPPT
techniques for PV Systems: energetic and cost
comparison”. Power and Energy Society General
Meeting - Conversion and Delivery of Electrical Energy in
the 21 Century, pp. 1 - 6.
[5]. E. I. O. Rivera, (2008). “Maximum Power Point Tracking
using the Optimal Duty Ratio for DC-DC Converters and
Load Matching in Photovoltaic Applications”. Applied
Power Electronics Conference and Exposition, 2008, APEC 2008. 23 Annual IEEE, pp. 987-991.
[6]. R. Gules, J. De Pellegrin Pacheco, H. L. Hey, and J.
Imhoff, (2008). “A maximum power point tracking system
with parallel connection for PV stand-alone applications”.
IEEE Trans. Ind. Electron., Vol. 55, No. 7, pp. 2674–2683.
[7]. W. Xiao, N. Ozog, and W. G. Dunford, (2008).
“Topology study of photovoltaic interface for maximum
power point tracking”. IEEE Trans. Ind. Electron., Vol. 54,
No. 3, pp. 1696–1704.
[8]. Arun Kumar Verma, Bhim Singh and D.T Sahani,
(2012). “Grid Interfaced Solar Photovoltaic Power
Generating System with Power Quality Improvement at AC
Mains”. Proc. of IEEE ICSET, Kathmandu, Nepal, pp. 177-
182.
[9]. G. Bhuvaneswari and R. Annamalai, (2011).
“Development of a solar cell model in MATLAB for PV
based generation system”. Proc. of Annual IEEE India
Conference (INDICON), pp.1-5.
[10]. W. Xiao, W. Dunford, P. Palmer, and A. Capel, (2007).
“Regulation of photovoltaic voltage”. IEEE Trans. Ind.
Electron., Vol. 54, No. 3, pp. 1365–1374.
[11]. I.H. Altas and A.M. Sharaf, (2007). “A Photovoltaic
Array Simulation Model for Matlab-simulink GUI
Environment”. 2007 International Conference on Clean
Electrical Power, pp. 341-345.
[12]. Tsai H.-L., Tu C.-S., and Su Y.- J., (2008).
“Development of Generalized Photovoltaic Model Using
Matlab/Simulink”. Proceedings of the World Congress on Engineering and Computer Science, San Francisco, USA,
pp. 846–851.
[13]. Trishan Esram, Jonathan W. Kimball, Philip T. Krein,
Patrick L. Chapman, and Pallab Midya, (2006). “Dynamic
maximum power point tracking of photovoltaic arrays
using ripple correlation control”. IEEE Transactions on
Power Electronics, Vol. 21, No. 5, pp. 1282-1291.
[14]. B. Singh and S.R. Arya, (2013). “Adaptive Theory-
Based Improved Linear Sinusoidal Tracer Control
Algorithm for DSTATCOM”. IEEE Transactions on Power
Electronics, Vol. 28, No. 8, pp. 3768-3778.
[15]. Yuncong Jiang, J.A.A. Qahouq and T.A. Haskew,
(2013). “Adaptive Step Size With Adaptive-Perturbation-
Frequency Digital MPPT Controller for a Single-Sensor
Photovoltaic Solar System”. IEEE Trans. Power Electronics,
Vol. 28, No. 7, pp. 3195-3205.
[16]. M.A. Elgendy, B. Zahawi and D.J. Atkinson, (2013).
“Assessment of the Incremental Conductance Maximum
Power Point Tracking Algorithm”. IEEE Transactions on
Sustainable Energy, Vol. 4, No.1, pp.108-117.
[17]. Bos, M.J., Abhijith, S., Aswin, V., Basil, R., and
Dhanesh R., (2014). “Fuzzy Logic Controlled PV Powered
Buck Converter with MPPT”. Int. J. Adv. Res. Electr. Electron.
Instrum. Eng., Vol. 3, pp. 9370–9377.
[18]. H. Renaudineau et al.,(2015). “A PSO-based global
MPPT technique for distributed PV power generation,” IEEE
Trans. Ind. Electron., Vol. 62, No. 2, pp. 1047–1058.
