References
[1]. A. Athia and C. Ji, (1997)How Initial Conditions Affect Generalization Performance in Large Networks. IEEE Trans. on Neural Networks, no 8,pp 448-451.
[2]. D.E. Dimal, P.M.Lister, and N.J. Leighton(1997)Neural Network Solutions to the Tool Condition Monitoring Problem in Metal Cutting- A Critical Review of Methods
. International Journal of Machine Tool Manufacturing, vol 37, pp 1219-1241.
[3]. D. Dornfeld(1990)A Neural Network Sensor Fusion for Tool Condition Monitoring. CIRP Annals, Vol 39, pp 101-105.
[4] A. Humar and M. Piska.(1999)Cutting Forces Analysis When Drilling Fibre Reinforced. Proceedings of the International SAMPE Technical Conference, Vol 31, pp
276-285
[5]. M. Leshno, V.Y. Lin, A. Pinkus and S. Schocken. (1993)Multilayer Feed forward Networks With a Non polynomial Activation Function Can Approximate Any Function, Neural Networksvol 6, no 6, pp 861-867.
[6]. T.W. Liao, and L.J. Chen.(1998)Manufacturing Process Modeling and Optimization Based on Multi-Layer Perceptron Network. Journal of Manufacturing Science and Engineering, vol 120, pp 109-119.
[7]. C. Murphy, M. Gilchrist, and G. Byrne.(2002) The Performance of Coated Tungsten Carbide Drills When Machining Carbon Fibre-Reinforced Epoxy Composite Materials. Proceedings of the IMECHE Part B Journal of Engineering Manufacture 216, no. 2, pp 143-150.
[8]. K. Palanikumar, L. Karunamoorthy and R. Kartikeyan.(2004) Optimal Machining Parameters for Achieving Minimal Tool wear in Turning or GFRP Composites.
International Journal of Manufacturing Science and Production, vol6, Part 3, pp 119-128.
[9]. W. Pederson and M. Ramulu. (2005)Proposed Tool Wear Model for Machining Particle Reinforced Metal Matrix Composites.SocietyofManufacturingEngineers,
Technical PaperTP05PUB39, pp 1-10.
[10]. V. Petridis and V.G. Kaburlasos.(2001)Clustering and Classification in Structured Data Domains Using Fuzzy LatticeNeurocomputing (FLN),IEEE Transactions on Knowledge and Data Engineering, vol 13 no 2, pp 245-260.
[11]. J. Ramkumar, S.K. Malhotra and R. Krishnamurthy.(2004) Effect of Workpiece Vibration on Drilling of GFRP Laminates, Journal of Materials Processing Technology, vol 152, no 3 pp 329-332.
[12]. H. Schneiderman and T. Kanade(2004) Object Detection Using the Statistics of Parts, International Journal of Computer Vision, vol 56 no 3, pp 151-177.
[13].A.N.ShuaibandF.A.Al-Sulaiman.(2004)Machinability ofKevlar® 49 Composite Laminates While Using Standard TiN Coated HSS Drills. Machining Science and Technology,vol 8, No.3 pp 449-467.
[14]. Y.L. Yao and X. Fang.(1993)Assessment of Chip Forming Patterns with Tool Wear Progression in Machining Via Neural Networks”, International Journal of Machine Tool Manufacture, vol 33, pp 89-102.
