References
[1]. Favro, L.D., Thomas, R.L., Han, X., Ouyang, Z., Newaz,
G., and Gentile, D. (2001) “Sonic infrared imaging of
fatigue cracks,” International Journal of Fatigue, Vol. 23,
S1, pp. 471-476.
[2]. Rideout C.A. (2007) “Detection and qualification of
fatigue damage in aircraft structural components,”
th Proceeding of SPIE 14 International Symposium on
Smart Structures and Materials & Nondestructive
Evaluation and Health Monitoring, 18 - 22 March 2007,
San Diego, California. paper # 6532-04.
[3]. Schofield, B.H., (1958) “Acoustic Emission under
Applied Stress,” USAF report WADC-TR-58-194.
[4]. Surgeon, M., and Wevers, M., (1999) “Modal Analysis
of Acoustic Emission Signals from CFRP Laminates,” NDT&E
International, Vol. 32, pp.311-322.
[5]. Eberhardt, E., Stead, D., Stimpson, B., Read, R.S.
(1997) “Changes in Acoustic Event Properties with
Progressive Fracture Damage,” Int. J. Rock Mech. & Min.
Sci., Vol. 34, N. 3-4, No. 071B.
[6]. Hamstad, M.A., O'Gallagher, A., and Gary, J., (2002)
“A Wavelet Transform Applied to Acoustic Emission Signals:
Part 1: Source Identification,” J. Acoustic Emission, V.20,
pp.39-61.
[7]. Finlayson, R.D., Friesel, M., Carlos, M., Cole, P., and
Lenain, J.C., (2001) “Health Monitoring of Aerospace
Structures with Acoustic Emission and Acousto-
Ultrasonics,” Insight, V. 43, N. 3.
[8]. Rogers, L.M., (2001) “Structural and Engineering
Monitoring by Acoustic Emission Methods Fundamentals
and Applications,” Lloyd's Register, September 2001.
[9]. Crawley, E. F. and de Luis, J. (1987) "Use of
Piezoelectric Actuators as Elements of Intelligent
Structures," AIAA Journal, Vol. 25, No. 10, pp. 1373-1385.
[10]. Sohn, H., Farrar, C.R., Hemez, F.M., Shunk, D.D.,
Stinemates, D.W., and Nadler B.R., (2004) “A Review of
Structural Health Monitoring Literature: 19962001,” Los
Alamos National Laboratory Report, LA-13976-MS, 2004.
[11]. Raghavan, A. and Cesnik, C.E.S. (2005) “Piezoelectric-actuator excited-wave field solutions for
guided-wave structural health monitoring,” Proceedings
of SPIE on Sensors and Smart Structures Technologies for
Civil, Mechanical, and Aerospace Systems, Vol. 5765, p
313-323.
[12]. Ihn, J.B., and Chang F-K., (2004) “Ultrasonic
Nondestructive Evaluation for Structural health Monitoring:
Build-in Diagnostics for Hot-spot Monitoring in Metallic and
Composite Structures,” in Ultrasonic Nondestructive
Evaluation: Engineering and Biological Material
Characterization, edited by T. Kundu, CRC press 2004.
[13]. Lemistre, M., Osmont, D., and Balageas, D., (2000)
“Active Health System Based on Wavelet Transform
Analysis of Diffracted Lamb Waves,” Proceedings of SPIE
on Fifth European Conference on Smart Structures and
Materials, Vol. 4073, pp. 194202.
[14]. Giurgiutiu, V., Bao, J., and Zhao, W., (2003)
“Piezoelectric Wafer Active Sensor Embedded Ultrasonics
in Beams and Plates,” Experimental Mechanics, Vol. 43,
No. 4, 428449.
[15]. Matt, H., Bartoli, I., Lanza di Scalea, F., Marzani, A.,
Coccia, S., Oliver, J., Kosmatka, J., Rizzo, P., Restivo, G.,
(2005) “A guided-wave system for monitoring the wing
skin-to-spar bond in unmanned aerial vehicles,”
Proceeding of SPIE on Sensors and Smart Structures
Technologies for Civil, Mechanical, and Aerospace
Systems, Vol. 5765, p. 758-768.
[16]. Mal, A. K., Ricci, F., Gibson, S., and Banerjee, S.,
(2003) “Damage Detection in Structures from Vibration
and Wave Propagation Method,” Proceedings of SPIE on
Smart Nondestructive Evaluation and Health Monitoring
of Structural and Biological Systems, Vol. 5047,
pp202210.
[17]. Lee, B. C. and Staszewski, W. J., (2003) “Modeling of
Lamb Waves for Damage Detection in Metallic
Structures,” Smart Materials and Structures, Vol. 12,
804814.
[18]. Lin, X. and Yuan, F. G., (2005) “Experimental Study of
Applying Migration Technique in Structural Health
Monitoring,” Structural Health Monitoring-An International
Journal, December 2005; 4: pp. 341 - 353.
[19]. Yu, L.; Giurgiutiu, V. (2005) “Multi-damage Detection
with Embedded Ultrasonic Structural Radar Algorithm
using Piezoelectric Wafer Active Sensors through
Advanced Signal Processing,” SPIE's Proceedings on
Health Monitoring and Smart NDE of Structural and
Biological Systems, San Diego, CA, 7-10 March, paper #
5768-48.
[20]. Giurgiutiu, V., Jenkins, C., Kendall, J., Yu, L., (2006)
“Nonlinear Acoustic Structural Health Monitoring,”
th Structural Health Monitoring session of the 47
AIAA/ASME/ASCE/AHS/ASC Structures, Structural
Dynamics, and Materials Conference, Newport, RI, 1-5
May 2006,paper # AIAA-2006-21141.
[21]. Rosalie, S.C., Vaughan, M., Bremner, A., and Chiu,
W.K., (2004) “Variation in the Group Velocity of Lamb
Waves as a Tool for the Detection of Delamination in
GLARE Aluminium Plate-like Structures”,Composite
Structures, Vol. 66, Issues 1-4, Oct-Dec 2004, pp. 77-86.
[22]. Matt, H., Bartoli, I., Lanza di Scalea, F., (2005)
“Ultrasonic Guided Wave Monitoring of Composite Wing
Skin-to-spar Bonded Joints in Aerospace Structures,”
Journal of the Acoustical Society of America (JASA), Vol.
118, N. 4, pp. 2240-2252.
[23]. Bray, D.E. and Stanley, R.K., (1997) Nondestructive
Evaluation: A Tool in Design, Manufacturing, and Service,
CRC Press, 1997.
[24]. Beyer, R.T. (1974) Nonlinear Acoustics, Published by
Acoustical Society of America in 1997.
[25]. Mason, W.P. (1960) “Phonon Viscosity and Its Effect on
Acoustic Wave Attenuation and Dislocation Motion” The
Journal of the Acoustical Society of America, Vol. 32, n4,
pp.458-472.
[26]. Hikata, A. and Elbaum, C., (1966) “Generation of
Ultrasonic Second and Third Harmonics Due to
Dislocation: I” Physical Review, Vol. 144, n 2, pp. 469-477.
[27]. Hikata, A., Sewel, F.A., Elbaum, C. (1966)
“Generation of Ultrasonic Second and Third Harmonics
Due to Dislocation: II” Physical Review, Vol. 151, no 2, pp.
442-449.
[28]. Breazeale, M. A. and Philips, J. (1984)
“Determination of third-order elastic constants from ultrasonic harmonic generation measurements,” Physical
Acoustics, Vol. 17, Academic Press, New York, pp. 160.
[29]. Cantrell, J.H., Yost, W.T. (2001) “Nonlinear Ultrasonic
Characterization of Fatigue Microstructures” International
Journal of Fatigue, no 23, pp. S487-S490.
[30]. Nagy, P.B. (1998) “Fatigue damage assessment by
nonlinear ultrasonic materials characterization”,
Ultrasonics, Vol. 36, pp. 375-381.
[31]. Van Den Abeele, K. E-A., Sutin, A., Carmeliet, J.,
Johnson, P.A. (2001) “Micro-Damage Diagnostics Using
Nonlinear Elastic Wave Spectroscopy (NEWS),” NDT&E
International, n. 34, pp. 230-248.
[32]. Kim, J.-Y., Yakovlev, V. A. and Rokhlin, S. I. (2004)
“Surface acoustic wave modulation on a partially closed
fatigue crack,” The Journal of the Acoustical Society of
America, Vol. 115, pp 1961-1972.
[33]. Frouin, J., Sathish, S., and Na, J.K. (2000) “Real-Time
Monitoring of Acoustic Linear and Nonlinear Behavior of
Titanium Alloys During Low-Cycle Fatigue and High-Cycle
Fatigue” Proceedings of the SPIE's 5th International
Symposium on Nondestructive Evaluation and Health
Monitoring of Aging Infrastructure, Vol. 3993, pp 60-67.
[34]. Na, J.K.; Frouin, J.; Sathish, S., (2003)
“Nondestructive fatigue damage assessment for Ti-6Al-4V
alloy,” First International Conference on Fatigue Damage
of Materials Experiment and Analysis, Fatigue Damage of
Materials, Jul. 14-16 2003, Toronto, Ont., Canada, pp.
159-168.
[35]. Donskoy, D., Zagrai, A., Chudnovsky, A., Golovin, E.,
Agarwala, V.S., (2006) “Nonlinear Vibro-Acoustic
Modulation Technique for Life Prediction of Aging Aircraft
rd Components,” Proceedings of the 3 European Workshop
on Structural Health Monitoring, 5-7 July 2006, Granada,
Spain.
[36]. Zagrai, A., Donskoy, D., Chudnovsky, A., Golovin, E.,
Agarwala, V.S., (2006) “Micro/Meso Scale Fatigue
Damage Accumulation Monitoring Using Nonlinear
Acoustic Vibro-Modulation Measurements,” Proceedings
th of SPIE 11 Symposium on Nondestructive Evaluation for
Health Monitoring and Diagnostics, 26 February 2 March
2006, San Diego, CA. paper # 6175-8.
[37]. Guyer, R.A. and Johnson, P.A. (1999) “Nonlinear
Mesoscopic Elasticity: Evidence for a New Class of
Materials,” Physics Today, Vol. 52, pp 30-35.
[38]. Zagrai, A., Donskoy, D., Chudnovsky, A., Golovin, E.,
(2006) “Nonlinear Acoustic Structural Health Monitoring,”
th Proceedings of 47 AIAA/ASME/ASCE/AHS/ASC Structures,
Structural Dynamics, and Materials Conference,
Newport, RI, 2006, paper 106-SDM-67.
[39]. LANL workshop on Nonlinear System Identification for
Damage Detection, July 25-26, 2006, for more
informations visit http://www.lanl.gov/projects/ei/ps.shtml.
[40]. Todd, M.D., Chang, L., Erickson, K., Lee, K., Nichols,
J.M., (2004) “Nonlinear excitation and attractor mapping
for detecting bolt preload loss in an aluminum frame,”
Proceeding of SPIE's Conference on Health Monitoring
and Smart Nondestructive Evaluation of Structural and
Biological Systems III; Vol. 5394, pp. 317-328.
[41]. Adams, D.E. and Nataraju, M. (2002) “A Nonlinear
Dynamical Systems Framework for Structural Diagnosis
and Prognosis,” International Journal of Engineering
Science, Volume 40, Issue 17, October 2002, pp. 1919-
1941.
[42]. Epureanu, B.I. , Shih-Hsun Yin, S.-H., and Derriso,
M.M. (2005) “High-Sensitivity Damage Detection Based
on Enhanced Nonlinear Dynamics,” Smart Mat. Str., 14,
pp. 321-327.
[43]. Antonets, V.A., Donskoy, D.M., and Sutin, A.M. (1986)
“Nonlinear Vibro-Diagnostics of Flaws in Multilayered
Structures”, Mechanics of Composite Materials, Vol. 15,
pp. 934-937.
[44]. Donskoy, D., Sutin A., and Ekimov A., (2001)
“Nonlinear Acoustic Interaction on Contact Interfaces
and its Use for Nondestructive Testing,” NDT&E
International, Vol. 34, pp. 231-238.
[45]. Yan, Z. and Nagy, P.B., “Thermo-Optical Modulation
for Improved Ultrasonic Fatigue Crack Detection in
Ti6Al4V,” NDT&E International, n. 33, 2000, pp. 213223.
[46]. Zagrai, A., Donskoy, D., Chudnovsky, A., Wu, H.
(2005) “Assessment of Material Degradation Using
rd Nonlinear Acoustic Vibro-Modulation Technique”, 3 USJapan
Symposium on Advancing Applications and Capabilities in NDE, 20-24 June 2005, Maui, Hawaii.
[47]. Liang, C.; Sun, F. P.; Rogers C. A., (1994) “Coupled
Electromechanical Analysis of Adaptive Material Systems
Determination of the Actuator Power Consumption and
System Energy transfer,” Impedance Modeling of Active
Material Systems,” Journal of Intelligent Material Systems
and Structures, Vol. 5, pp. 12-20.
[48]. Giurgiutiu, V., Zagrai, A. (2005) “Damage Detection
in Thin Plates and Aerospace Structures with the Electro-
Mechanical Impedance Method”, International Journal
of Structural Health Monitoring, Vol. 4, N. 2, pp. 99-118.
[49]. Park, G., Sohn, H., Farrar, C.R., and Inman, D., (2003)
“Overview of Piezoelectric Impedance-Based Health
Monitoring and Path Forward,” The Shock and Vibration
Digest, Vol. 35, N. 6, pp. 451-463.
[50]. Zagrai, A., (2007) “Electro-Mechanical Analogies for
Modeling the Structural Impedance Response,”
th Proceeding of SPIE 14 International Symposium on
Smart Structures and Materials & Nondestructive
Evaluation and Health Monitoring, 18 22 March 2007,
San Diego, California. paper # 6532-14.
[51]. Chaudhry, Z., F. P. Sun, and C. A. Rogers (1994)
"Health Monitoring of Space Structures Using Impedance
Measurements," Fifth International Conference on
Adaptive Structures, Sendai, Japan, 5-7 December,
1994; pp. 584-591.
[52]. Chaudhry, Z., Joseph, T., Sun, F., and Rogers C.
(1995) "Local-Area Health Monitoring of Aircraft via
Piezoelectric Actuator/Sensor Patches," Proceedings, SPIE
North American Conference on Smart Structures and
Materials, San Diego, CA, 26 Feb. - 3 March, 1995; Vol.
2443, pp. 268-276.
[53]. Giurgiutiu, V., Reynolds, A., and Rogers, C.A., (1998)
“Experimental Investigation of E/M Impedance Health
Monitoring of Spot-Welded Structural Joints”, Journal of
Intelligent Material Systems and Structures, Vol. 10,
October 1999, pp. 802-812.
[54]. Park, G. and Inman, D.J., (2001) “Smart Bolts: an
Example of Self-Healing Structures,” Smart Materials
Bulletin, July 2001, pp. 7-8.
[55]. Park, G., Rutherford, A.C., Sohn, H., Farrar, C.R., (2005) “An Outlier Analysis Framework for Impedance-
Based Structural Health Monitoring,” Journal of Sound and
Vibration, Vol. 286, pp. 229-250.
[56]. Peairs, D.M., Grisso, B.L., Margasahayam, R.N.,
Page, K.R., Inman, D.J., (2004) “Impedance-Based
Health Monitoring of Space Shuttle Ground Structures,”
SPIE Proceedings on Health Monitoring and Smart
Nondestructive Evaluation of Structural and Biological
Systems III, Vol. 5394, pp. 99-107.
[57]. Childs, B., Lalande, F., Chaudhry, Z., and Rogers
C.A., (1996) "High-Frequency Impedance Analysis for NDE
of Complex Precision Parts," Proc. of SPIE Symposium on
Smart Structures and Integrated Systems, Vol. 2717, pp.
237-243.
[58]. Quattrone, R., Berman, J., and Kamphaus, J. (1998)
“Upgrade and Monitoring of Unreinforced Masonry
Structures Using Fiber Reinforced Polymers,” Proceeding
of the 1998 International Composites Expo, January 19-
21, 1998, Nashville, TN, pp. 13-C/1-7.
[59]. Park, G., Cudney, H., and Inman, D.J., (1999) "Impedance-based Health Monitoring Technique for Civil
nd Structures," Proc. of 2 International Workshop on
Structural Health Monitoring, September 8-10, 1999,
Stanford, CA, pp. 523-532.
[60]. Bhalla, S. and Soh, C.K., (2004) “High Frequency
Piezoelectric Signatures for Diagnosis of Seismic/Blast
Induced Structural Damages,” NDT&E, Vol. 37, pp. 23-33.
[61]. Quinn, J.J. (1967) “Electromagnetic Generation of
Acoustic Waves and the Surface Impedance of Metals,”
Physics Letters A, Vol. 25, Issue 7, 9 October 1967, Pages
522-523.
[62]. Banik, N.C. and Overhauser, A.W., (1977)
“Electromagnetic Generation of Ultrasound in Metals,”
Physical Review B, Vol. 16, N. 8, pp. 3379-3388.
[63]. Zagrai, A. and Cakan, H., (2008) “Damage
Diagnostics of Metallic Structures Using Magneto-
Mechanical Impedance Technique,” Proceeding of SPIE
th 15 International Symposium on Smart Structures and
Materials & Nondestructive Evaluation and Health
Monitoring, Vol. 6935.
