i-manager Publications

A Review on Different Resonator Based Microwave Filters

Priyanka Srivastava*, Arvind Kumar Pandey**, R. K. Chauhan***

* PG Scholar, Communication Engineering, Madan Mohan Malaviya University of Technology, Gorakhpur, India.

** Research Scholar, Madan Mohan Malaviya University of Technology, Gorakhpur, India.

*** Professor, Department of Electronics and Communication Engineering, Madan Mohan Malaviya University of Technology, Gorakhpur, India.

Periodicity:August - October'2015
DOI : https://doi.org/10.26634/jcs.4.4.3712

Abstract

High performance microwave filters have become the need of the modern wireless communication systems. This demands the designing of more compact and efficient microwave filters providing multiple bands. For the miniaturization and integration of the microwave filters, microstrip filters based on multiple mode resonators are of great significance. This paper reviews several multiple band-pass filters based on different multi-mode resonators by focusing on Stepped Impedance Resonator (SIR), Stub Loaded Resonator (SLR) and Ring/Loop Resonator (open and closed) based microwave filters. SIR has size reduction ability and harmonic control with wide tuning range. A SLR has a good stopband rejection ability. It can generate two modes that can efficiently reduce the size of the filters. Loop resonator can be used to reduce the size along with optimized characteristics of filters.

Keywords

Multi Mode Resonators, Stepped Impedance Resonator (SIR), Loop Resonator, Ring Resonator, Stub Loaded Resonator (SLR), Band-pass Filter

How to Cite this Article?

Srivastava, P., Pandey, A. K., and Chauhan, R. K. (2015). A Review on Different Resonator Based Microwave Filters. i-manager’s Journal on Communication Engineering and Systems, 4(4), 14-22. https://doi.org/10.26634/jcs.4.4.3712

References

[1]. Nguyen C. and Chang K, (1985). “Analysis and design of spurline bandstop filters,” IEEE MTT-S Digest, Vol.33, No .12, pp.1416-1421.

[2]. Tu W. H. and Chang K, (2005). “Compact microstrip bandstop filter using open stub and spurline,” IEEE Microwave Wireless Components Lett., Vol. 15,No.4, pp. 268-270.

[3]. Chen Wu. N., Weng M. H., Tang I. T., Hung C. Y., Cheng T. C. and Houng M P., (2004). “Notch Filters with Novel Microstrip Triangle Type Resonator", IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, Vol. 51, No.8, pp.1018-1021.

[4]. Garcia – Garcia J., Bonache J., Gil I., Martin F., Marques R., Falcone F., Lopetegi T., Laso M. A. G. and Sorolla M., (2005). “Comparison of electromagnetic band gap and split ring resonator microstrip lines as stop band structures,” Microwave Opt Technol Lett., Vol. 44, pp. 376-379.

[5]. C. Quendo, E. Rius, and C. Person, (2003). “An original topology of dual-band filter with transmission zeros,” in IEEE MTT-S Int. Microw. Symp. Dig. Vol. 2, pp. 1093-1096.

[6]. C. M. Tsai, H. M. Lee, and C. C. Tsai, (2005). “Planar filter design with fully controllable second passband,” IEEE Trans. Microw. Theory Tech., Vol. 53, No. 11, pp. 3429-3439.

[7]. J. T. Kuo and E. Shih, (2003). “Microstrip steppedimpedance resonator band-pass filter with an extended optimal rejection bandwidth,” IEEE Trans. Microw. Theory Tech. Vol. 51, No.5, pp. 1554-1559.

[8]. S. Sun and L. Zhu, (2005). “Coupling dispersions of parallel coupled microstrip lines for dual-band filters with controllable fractional pass bandwidths,” in IEEE MTT-S Int. Microw. Symp. Dig.

[9]. Y. P. Zhang and M. Sun, (2006). “Dual-band microstrip bandpass filter using stepped-impedance resonators with new coupling schemes,” IEEE Trans. Microw. Theory Tech., Vol. 54, No. 10, pp. 3779-3785.

[10]. P. Mondal and M. Mandal, (2008). “ Design of dualband bandpass filters using stub-loaded open loop resonators,” IEEE Trans. Microw. Theory Tech., Vol. 56, No. 1, pp. 150-155.

[11]. J. W. Fan, C. H. Liang, and Y. J. Wu, (2007). “Compact dual-band and tri-band filters with loaded open-loop resonators”, J. Electromagn. Waves Appl., Vol. 21, No. 15, pp. 2371-2378.

[12]. D. M. Pozar, (1998). Microwave Engineering, 2nd ed. New York :Wiley.

[13]. M. Makimoto, S.Yamashita,(1980). “Bandpass filters using parallel coupled stripline stepped impedance resonators,” IEEE Trans. Microw. Theory Tech., Vol. 28, No. 12, pp. 1413–1417.

[14]. W. Shen, X. W. Sun, and W. Y. Yin, (2009). “A novel microstrip filter using three-mode stepped impedance resonator (TSIR),” IEEE Microw.Wireless Compon. Lett., Vol. 19, No. 12, pp. 774–776.

[15]. Weng, M.H., Wu, H.W., Su, Y.K. (2007). “Compact and low lossdual-band bandpass filter using pseudo-interdigital stepped impedance resonators for WLANs”, IEEE Microw. Wirel. Compon. Lett., Vol. 17,No.3, pp. 187–189.

[16]. Chu, Q.X., Chen, F.C. (2008). “A compact dual-band bandpass filter using meandering stepped impedance resonators”, IEEE Microw. Wirel. Compon. Lett., Vol. 18,No. 5, pp. 320–322.

[17]. C. I. G. Hsu, C. H. Lee, and Y. H. Hsieh, (2008). “Tri-band bandpass filter with sharp passband skirts designed using trisection SIRs”, IEEE Microw. Wireless Compon. Lett.,Vol. 18, No. 1, pp. 19–21.

[18] . C. H. Lee, C. I. G. Hsu, and H. K. Jhuang, (2006). “Design of a new tri-band microstrip BPF using combined quarter-wavelength SIRs,” IEEE Microw. Wireless Compon. Lett., Vol. 16, No. 11, pp. 594–596.

[19] . X. M. Lin and Q. X. Chu, (2007)“Design of triple-band bandpass filter using tri-section stepped-impedance resonators,” in Proc. Int. Microw. Millimeter Wave Tech. Conf., Guilin, China, pp. 1–3.

[20]. W.-H. Tu, (2010). “Sharp-rejection broadband microstrip bandpass filters using loaded open-loop resonator,” IEEE MTT-S Int. Microw. Symp. Dig., pp. 1696–1699.

[21] . J. S. Hong, H. Shaman, and Y. H. Chun, (2007). “Dualmode microstrip openloop resonators and filters,” IEEE Trans. Microw. Theory Tech., Vol. 55, No. 8, pp. 1764–1770.

[22] . M. Matsuo, H. Yabuki, and M. Makimoto, (2001). “Dual-mode stepped impedance ring resonator for bandpass filter applications,” IEEE Trans. Microw. Theory Tech., Vol. 49,No. 7, pp. 1235–1240.

[23]. J.-T. Kuo and C.-Y. Tsai, (2006). “Periodic steppedimpedance ring resonator (PSIRR) bandpass filter with a miniaturized area and desirable upper stipband charateristics”, IEEE Trans. Microw. Theory Tech., Vol. 54, No. 3, pp. 1107–1112.

[24] . M. K. M. Salleh, G. Prigent, O. Pigaglio, and R. Crampagne, (2008). “Quarter-wavelength side-coupled ring resonator for bandpass filters,” IEEE Trans. Microw. Theory Tech.,Vol. 56, No. 1, pp. 156–162.

[25]. Luo, S., Zhu, L. (2009). “A novel dual-mode dual-band bandpass filter based on a single ring resonator”, IEEE Microw. Wirel. Compon. Lett, Vol.19,No.8, pp. 497–499.

[26]. Luo, S., Zhu, L., Sun, S. (2009). “A dual- mode dualband bandpass filter using a single ring resonator”, Proc. Asia-PacificMicrow. Conf., pp. 921–924.

[27] . J. Z. Chen, N. Wang, Y. He, and C. H. Liang, (2011). “Fourth-order tri-band bandpass filter using square ring loaded resonators,” Electron. Lett., Vol. 47, No. 15, pp. 858–859.

[28]. M. T. Doan, W.Q.Che, and W. J. Feng, (2012). “Tri-band bandpass filter using square ring short stub loaded resonators,” Electron. Lett., Vol. 48, No. 2, pp. 106–107.

[29]. S. B. Zhang and L. Zhu, (2011). “Compact and highselectivity microstrip bandpass filters using triple-/quadmode stub-loaded resonators,” IEEE Microw. Wireless Compon. Lett., Vol. 21, No. 10, pp. 522–524.

[30]. H. W. Deng, Y. J. Zhao, L. Zhang, X. S. Zhang, and S. P. Gao, (2010). “Compact quintuple-mode stub-loaded resonator and UWB filter,” IEEE Microw. Wireless Compon. Lett.,Vol. 20,No. 8, pp. 438–440.

[31] F. C. Chen, Q. X. Chu, Z. H. Li, and X. H. Wu, (2012). “Compact dual-band bandpass filter with controllable bandwidths using stub-loaded multiple- mode resonator”, IET Microw. Antennas. Propag, Vol. 6, No. 10, pp. 1172–1178.

[32]. X. Y. Zhang, J.-X. Chen, Q. Xue and S.-M. Li, (2007). “Dual-band bandpass filters using stub-loaded resonators,” IEEE Microw. Wireless Compon. Lett., Vol.17. No.8, pp.583- 585.

[33]. Chen, F.C., Chu, Q.X., Tu, Z.H., (2009). “Design of compact dual-band bandpass filter using short stub loaded resonator”, Microw. Opt. Technol. Lett., Vol.51, No.4, pp. 959–963.

[34]. Chen, F.C., Chu, Q.X., (2010). “Novel multistub loaded resonator and its application to high-order dual-band filters”, IEEE Trans. Microw. Theory Tech., Vol.58, No.6, pp. 1551–1556.

[35]. F. C. Chen, Q. X. Chu, and Z. H. Tu, (2008). “Tri-band bandpass filter using stub loaded resonators,” Electron. Lett., Vol. 44, pp. 747–749.

[36]. R. Li and L. Zhu, (2007). “Compact UWB bandpass filter using stub loaded multiple-mode resonator,” IEEE Microw. Wireless Comp. Letts., Vol. 17, No. 1, pp. 40–42.

[37]. Q. X. Chu and X. K. Tian, (2010). “Design of UWB bandpass filter using stepped-impedance stub-loaded resonator,” IEEE Microw. Wireless Compon. Lett., Vol. 20, No. 9, pp. 501–503.

[38]. Gorur, A., Karpuz, C., (2007). “Compact dual-band bandpass filters using dual mode resonators”, IEEE MTT-S Int. Microw. Symp. Dig., pp. 905–908.

If you have access to this article please login to view the article or kindly login to purchase the article

Single Article

	North Americas,UK, Middle East,Europe		India	Rest of world
	USD	EUR	INR	USD-ROW
Online	15	15

ADD TO CART

Options for accessing this content:

If you would like institutional access to this content, please recommend the title to your librarian.
If you already have i-manager's user account: Login above and proceed to purchase the article.
New Users: Please register, then proceed to purchase the article.