References
[1]. Nguyen C. and Chang K, (1985). “Analysis and design
of spurline bandstop filters,” IEEE MTT-S Digest, Vol.33, No
.12, pp.1416-1421.
[2]. Tu W. H. and Chang K, (2005). “Compact microstrip
bandstop filter using open stub and spurline,” IEEE
Microwave Wireless Components Lett., Vol. 15,No.4, pp.
268-270.
[3]. Chen Wu. N., Weng M. H., Tang I. T., Hung C. Y., Cheng
T. C. and Houng M P., (2004). “Notch Filters with Novel
Microstrip Triangle Type Resonator", IEEE Transactions on
Ultrasonics, Ferroelectrics, and Frequency Control, Vol. 51,
No.8, pp.1018-1021.
[4]. Garcia – Garcia J., Bonache J., Gil I., Martin F., Marques
R., Falcone F., Lopetegi T., Laso M. A. G. and Sorolla M.,
(2005). “Comparison of electromagnetic band gap and
split ring resonator microstrip lines as stop band structures,”
Microwave Opt Technol Lett., Vol. 44, pp. 376-379.
[5]. C. Quendo, E. Rius, and C. Person, (2003). “An original
topology of dual-band filter with transmission zeros,” in IEEE
MTT-S Int. Microw. Symp. Dig. Vol. 2, pp. 1093-1096.
[6]. C. M. Tsai, H. M. Lee, and C. C. Tsai, (2005). “Planar filter
design with fully controllable second passband,” IEEE Trans.
Microw. Theory Tech., Vol. 53, No. 11, pp. 3429-3439.
[7]. J. T. Kuo and E. Shih, (2003). “Microstrip steppedimpedance
resonator band-pass filter with an extended
optimal rejection bandwidth,” IEEE Trans. Microw. Theory
Tech. Vol. 51, No.5, pp. 1554-1559.
[8]. S. Sun and L. Zhu, (2005). “Coupling dispersions of
parallel coupled microstrip lines for dual-band filters with
controllable fractional pass bandwidths,” in IEEE MTT-S Int.
Microw. Symp. Dig.
[9]. Y. P. Zhang and M. Sun, (2006). “Dual-band microstrip
bandpass filter using stepped-impedance resonators with
new coupling schemes,” IEEE Trans. Microw. Theory Tech.,
Vol. 54, No. 10, pp. 3779-3785.
[10]. P. Mondal and M. Mandal, (2008). “ Design of dualband
bandpass filters using stub-loaded open loop
resonators,” IEEE Trans. Microw. Theory Tech., Vol. 56, No. 1,
pp. 150-155.
[11]. J. W. Fan, C. H. Liang, and Y. J. Wu, (2007). “Compact
dual-band and tri-band filters with loaded open-loop
resonators”, J. Electromagn. Waves Appl., Vol. 21, No. 15,
pp. 2371-2378.
[12]. D. M. Pozar, (1998). Microwave Engineering, 2nd ed.
New York :Wiley.
[13]. M. Makimoto, S.Yamashita,(1980). “Bandpass filters
using parallel coupled stripline stepped impedance
resonators,” IEEE Trans. Microw. Theory Tech., Vol. 28, No.
12, pp. 1413–1417.
[14]. W. Shen, X. W. Sun, and W. Y. Yin, (2009). “A novel
microstrip filter using three-mode stepped impedance
resonator (TSIR),” IEEE Microw.Wireless Compon. Lett., Vol.
19, No. 12, pp. 774–776.
[15]. Weng, M.H., Wu, H.W., Su, Y.K. (2007). “Compact and
low lossdual-band bandpass filter using pseudo-interdigital
stepped impedance resonators for WLANs”, IEEE Microw.
Wirel. Compon. Lett., Vol. 17,No.3, pp. 187–189.
[16]. Chu, Q.X., Chen, F.C. (2008). “A compact dual-band
bandpass filter using meandering stepped impedance
resonators”, IEEE Microw. Wirel. Compon. Lett., Vol. 18,No.
5, pp. 320–322.
[17]. C. I. G. Hsu, C. H. Lee, and Y. H. Hsieh, (2008). “Tri-band
bandpass filter with sharp passband skirts designed using trisection
SIRs”, IEEE Microw. Wireless Compon. Lett.,Vol. 18,
No. 1, pp. 19–21.
[18] . C. H. Lee, C. I. G. Hsu, and H. K. Jhuang, (2006).
“Design of a new tri-band microstrip BPF using combined
quarter-wavelength SIRs,” IEEE Microw. Wireless Compon.
Lett., Vol. 16, No. 11, pp. 594–596.
[19] . X. M. Lin and Q. X. Chu, (2007)“Design of triple-band
bandpass filter using tri-section stepped-impedance
resonators,” in Proc. Int. Microw. Millimeter Wave Tech. Conf., Guilin, China, pp. 1–3.
[20]. W.-H. Tu, (2010). “Sharp-rejection broadband
microstrip bandpass filters using loaded open-loop
resonator,” IEEE MTT-S Int. Microw. Symp. Dig., pp.
1696–1699.
[21] . J. S. Hong, H. Shaman, and Y. H. Chun, (2007). “Dualmode
microstrip openloop resonators and filters,” IEEE
Trans. Microw. Theory Tech., Vol. 55, No. 8, pp. 1764–1770.
[22] . M. Matsuo, H. Yabuki, and M. Makimoto, (2001).
“Dual-mode stepped impedance ring resonator for
bandpass filter applications,” IEEE Trans. Microw. Theory
Tech., Vol. 49,No. 7, pp. 1235–1240.
[23]. J.-T. Kuo and C.-Y. Tsai, (2006). “Periodic steppedimpedance ring resonator (PSIRR) bandpass filter with a miniaturized area and desirable upper stipband charateristics”, IEEE Trans. Microw. Theory Tech., Vol. 54, No. 3, pp. 1107–1112.
[24] . M. K. M. Salleh, G. Prigent, O. Pigaglio, and R. Crampagne, (2008). “Quarter-wavelength side-coupled ring resonator for bandpass filters,” IEEE Trans. Microw. Theory Tech.,Vol. 56, No. 1, pp. 156–162.
[25]. Luo, S., Zhu, L. (2009). “A novel dual-mode dual-band bandpass filter based on a single ring resonator”, IEEE Microw. Wirel. Compon. Lett, Vol.19,No.8, pp. 497–499.
[26]. Luo, S., Zhu, L., Sun, S. (2009). “A dual- mode dualband bandpass filter using a single ring resonator”, Proc. Asia-PacificMicrow. Conf., pp. 921–924.
[27] . J. Z. Chen, N. Wang, Y. He, and C. H. Liang, (2011). “Fourth-order tri-band bandpass filter using square ring loaded resonators,” Electron. Lett., Vol. 47, No. 15, pp. 858–859.
[28]. M. T. Doan, W.Q.Che, and W. J. Feng, (2012). “Tri-band bandpass filter using square ring short stub loaded resonators,” Electron. Lett., Vol. 48, No. 2, pp. 106–107.
[29]. S. B. Zhang and L. Zhu, (2011). “Compact and highselectivity microstrip bandpass filters using triple-/quadmode stub-loaded resonators,” IEEE Microw. Wireless Compon. Lett., Vol. 21, No. 10, pp. 522–524.
[30]. H. W. Deng, Y. J. Zhao, L. Zhang, X. S. Zhang, and S. P. Gao, (2010). “Compact quintuple-mode stub-loaded resonator and UWB filter,” IEEE Microw. Wireless Compon. Lett.,Vol. 20,No. 8, pp. 438–440.
[31] F. C. Chen, Q. X. Chu, Z. H. Li, and X. H. Wu, (2012). “Compact dual-band bandpass filter with controllable bandwidths using stub-loaded multiple- mode resonator”, IET Microw. Antennas. Propag, Vol. 6, No. 10, pp. 1172–1178.
[32]. X. Y. Zhang, J.-X. Chen, Q. Xue and S.-M. Li, (2007). “Dual-band bandpass filters using stub-loaded resonators,” IEEE Microw. Wireless Compon. Lett., Vol.17. No.8, pp.583- 585.
[33]. Chen, F.C., Chu, Q.X., Tu, Z.H., (2009). “Design of compact dual-band bandpass filter using short stub loaded resonator”, Microw. Opt. Technol. Lett., Vol.51, No.4, pp. 959–963.
[34]. Chen, F.C., Chu, Q.X., (2010). “Novel multistub loaded resonator and its application to high-order dual-band filters”, IEEE Trans. Microw. Theory Tech., Vol.58, No.6, pp. 1551–1556.
[35]. F. C. Chen, Q. X. Chu, and Z. H. Tu, (2008). “Tri-band bandpass filter using stub loaded resonators,” Electron. Lett., Vol. 44, pp. 747–749.
[36]. R. Li and L. Zhu, (2007). “Compact UWB bandpass filter using stub loaded multiple-mode resonator,” IEEE Microw. Wireless Comp. Letts., Vol. 17, No. 1, pp. 40–42.
[37]. Q. X. Chu and X. K. Tian, (2010). “Design of UWB bandpass filter using stepped-impedance stub-loaded resonator,” IEEE Microw. Wireless Compon. Lett., Vol. 20, No. 9, pp. 501–503.
[38]. Gorur, A., Karpuz, C., (2007). “Compact dual-band bandpass filters using dual mode resonators”, IEEE MTT-S Int. Microw. Symp. Dig., pp. 905–908.
