An Approach to the Management of the Sustainable Issues in Mobile Phone Design and Manufacturing

Tom Page*
*Senior Lecturer, Electronic Product Design, Loughborough Design School, Loughborough University, UK.
Periodicity:September - November'2015
DOI : https://doi.org/10.26634/jmgt.10.2.3675

Abstract

As the desire for more consumer electronics continuously grows, the demand for rare earth materials used to make such products increases. The linear method by which a majority of the world currently manufactures is not a long-term sustainable solution and these current product cycles will have to be replaced, with more circular business models, in order to adjust to these consumer demands. The aim of this research is to investigate sustainability issues in the whole life cycle of mobile phones. The objectives of this research comprised identifying key sustainable design factors, applying a theoretical framework based on the Circular Economy (CE) to the development, use and disposal of mobile phone products. This work has a wider implication for other such type of electronic products and sub-assemblies and the materials that they are made from.

Keywords

Circular Economy (CE), Mobile Phone Industry, Management.

How to Cite this Article?

Page, T. (2015). An Approach to the Management of the Sustainable Issues in Mobile Phone Design and Manufacturing. i-manager’s Journal on Management, 10(2), 12-23. https://doi.org/10.26634/jmgt.10.2.3675

References

[1]. Banks, R. D. (1994). How to spur the “greening” of industry in rapidly industrializing countries. Industry and Environment.(4)
[2]. Bhamra, T. A. & Lofthouse, V. A. (2007). Design for Sustainability: A Practical Approach (Aldershot: Gower).
[3]. Bonsiepe, G. (1973). 'Precariousness and Ambiguity: Industrial Design in Dependent Countries' in Design for Need Bicknell, J. and McQiston, L. (eds.) pp.13-19 (London: Pergamon Press, RCA).
[4]. Bouling, K. E. (1966). The Economics of the Coming Spaceship Earth. Cited in: Journal of Cleaner Production, (42).
[5]. Burrall, P. (1991). Green Design (London: Design Council).
[6]. Geng, Y. & Doberstein, B. (2008). “Developing the Circular Economy in China: Challenges and opportunities for achieving “leapfrog development.” International Journal of Sustainable Development and World Ecology. Vol.15, pp.231-239.
[7]. Geng, Y., Fu, J., Sarkis, J. & Xue, B. (2012). “Towards a National Circular Economy Indicator System in China: An Evaluation and Critical Analysis,” Journal of Cleaner Production, Vol.23, pp.216-224.
[8]. Geng, Y., Wang, X.B., Zhu, Q. H. & Zhao, H. X., (2010). “Regional initiative in promoting cleaner production in China: A Case of Liaoning,” The Journal of Cleaner Production, Vol.18, pp.1502-1508.
[9]. Geng, Y., Zhang, P., Cote, R. P. & Fujita, T. (2009). “Assessment for the National Eco-Industrial Park Standard for Promoting Industrial Symbiosis in China,” Journal of Industrial Ecology, Vol.13, pp.12-26. Cited in Su, B., Heshmati, A., Geng, Y. & Yu, X. (2013). A review of the Circular Economy in China: Moving from Rhetoric to Implementation. Journal of Cleaner Production, Vol.42, pp.215-227.
[10]. Geng, Y. & Wu, C.Y. (2000). “Designing and Operating eco-Industrial Parks in China.” Journal of Central South University of Technology (in Chinese) Cited in (Geng and Doberstein, 2008).
[11]. Mackenzie, D. (1991). Green Design: Design for the Environment (London, Laurence King Publishing Ltd).
[12]. Manzini, E. (1990). The New Frontiers: Design Must Change and Mature, Design (501) pp.9.
[13]. McKinsey and Co, (2014). Towards the Circular Economy [Online] The Ellen MacArthur Foundation. Available at: http://www.ellenmacarthurfoundation.org/ business/reports/ce2014 [Accessed 4 February 2014].
[14]. METI (2004). Handbook on Resource Recycling Legislation and 3R Initiatives, Ministry of Economy, Trade and Industry. Tokyo, Japan.
[15]. Morioka, T., Tsunemi, K., Yamamoto, Y., Yabar, H. & Yoshida, N. (2005). “Eco-efficiency of advanced loop closing systems for vehicles and household appliances in Hyogo Eco-town,” Journal of Industrial Ecology, Vol.9(4), pp.205-221.
[16]. Packard, V. (1963). The Waste Makers (Middlesex: Penguin).
[17]. Papanek, V. (1971). Design for the Real World (New York: Pantheon Books).
[18]. Park, J., Sarkis, J. & Wu, Z (2010). “Creating integrated business and environmental value within the context of China's circular economy and ecological modernization,” Journal of Cleaner Production, Vol.18, pp.1494-1501.
[19]. Pearce, D. W. & Turner, R. (1990). Economics of Natural Resources and the Environment (London: Harvester Wheatsheaf).
[20]. Price water house Cooper (2011). Minerals and metals scarcity in manufacturing: the ticking time bomb, Price water house Cooper.
[21]. Ryan, C. (1993). 'Design and the Ends of Progress' in O2 Event: Striking Visions, Groen, M., Musch, P. and Zijlstra, S. (eds) (The Netherlands:O2).
[22]. Schumacher, E. F. (1973). Small is Beautiful: a Study of Economics as if People Mattered (London: Sphere Books, Ltd).
[23]. Stahel, W.R. (1986). The Functional Economy: Cultural and Organizational Change. In: The Hidden Wealth, Science and Public Policy, London, U.K (13).
[24]. Heshmati, A., Geng, Y. & Yu, X. (2013). “A review of the Circular Economy in China: Moving from Rhetoric to Implementation,” Journal of Cleaner Production, Vol.42, pp.215-227.
[25]. The Ellen MacArthur Foundation, (2014). Circular Economy - The Principles. [Online] (Updated 2012) Available at: http://www.ellenmacarthurfoundation.org/ circular-economy/circular-economy [Accessed 26 January 2014].
[26]. World Commission on Environment and Development (1987). Our Common Future (New York: Oxford University Press).
[27]. Yuan, Z. W., Jun, B. & Moriguici, Y.C. (2006). “The Circular Ecology: A new development strategy in China,” Journal of Industrial Ecology, Vol.10, pp.4-8.
[28]. Zhu, D. J. (2005). Circular Economy: New economy for 21st Century. Empirical Reference, Vol.8, pp.28-30 (in Chinese). Cited in Su, B., Heshmati, A., Geng, Y., Yu, X. (2013). A review of the Circular Economy in China: Moving from Rhetoric to Implementation. Journal of Cleaner Production, Vol.42, pp.215-227.
[29]. Zhu, D. J. & Huang, X. F. (2005). “Building up a Model for Circular Economy based on Object, Main Body and Policy,” Nakai Academic Journal, Vol.4, pp.86-93.
If you have access to this article please login to view the article or kindly login to purchase the article

Purchase Instant Access

Single Article

North Americas,UK,
Middle East,Europe
India Rest of world
USD EUR INR USD-ROW
Pdf 35 35 200 20
Online 35 35 200 15
Pdf & Online 35 35 400 25

Options for accessing this content:
  • If you would like institutional access to this content, please recommend the title to your librarian.
    Library Recommendation Form
  • If you already have i-manager's user account: Login above and proceed to purchase the article.
  • New Users: Please register, then proceed to purchase the article.