References
[1]. M. P. Kazmierkowski and L. Malesani, (1998). “Current
control techniques for three-phase voltage- source
PWMconverters: A survey”, IEEE Trans. Ind. Electron., Vol.
45, No. 5, pp. 691–703.
[2]. D.M. Brod and D.W. Novotny, (1985). “Current control
of VSI-PWM inverters”, IEEE Trans. Ind. Appl., Vol. IA-21, No.
3, pp. 562–570.
[3]. S. Buso, L. Malesani, and P. Mattavelli, (1998).
“Comparison of current control techniques for active filter
Applications”, IEEE Trans. Ind. Electron., Vol. 45, No. 5, pp.
722–729.
[4]. A. Tripathi and P. C. Sen, (1992). “Comparative
analysis of fixed and sinusoidal band hysteresis current
controllers for voltage source inverters”, IEEE Trans. Ind.
Electron., Vol. 39, No. 1, pp. 63–73.
[5]. K. M. Rahman, M. R. Khan, M. A. Choudhury, and M.
A. Rahman, (1997). “Variable band hysteresis current
controllers for PWM voltage source inverters”, IEEE Trans.
Power Electron., Vol. 12, No. 6, pp. 964–970.
[6]. B. K. Bose, (1990). “An adaptive hysteresis-band
current control technique of a voltage-fed PWM inverted
for machine drive system”, IEEE Trans. Ind. Electron., Vol.
37, No. 5, pp. 402–408.
[7]. L. Malesani and P. Tenti, (1990). “A novel hysteresis
control method for current controlled VSI PWM inverters
with constant modulation frequency”, IEEE Trans. Ind.
Appl., Vol. 26, No. 1, pp. 88–92.
[8]. L.Malesani, L. Rossetto, L. Sonaglioni, P. Tomasin, and
A. Zuccato, (1996). “Digital adaptive hysteresis current control with clocked commutations and wide operating
range”, IEEE Trans. Ind. Appl., Vol. 32, No. 2, pp. 1115–
1121.
[9]. L.Malesani, P. Mattavelli, and P. Tomasin, (
“Improved constant-frequency hysteresis current control
for VSI inverters with simple feedforward bandwidth
prediction”, IEEE Trans. Ind. Appl., Vol. 33, No. 5, pp.
1194–1202.
[10]. P. N. Tekwani, R. S. Kanchan, and K. Gopakumar,
(2007). “Novel current error space phasor based
hysteresis controller using parabolic bands for control of
switching frequency variations”, IEEE Trans. Ind. Electron.,
Vol. 54, No. 5, pp. 2648–2656.
[11]. S. Buso, S. Fasolo, L. Malesani, and P. Mattavelli,
(2000). “A dead-beat adaptive hysteresis current control”,
IEEE Trans. Ind. Appl., Vol. 36, No. 4, pp. 1174–1180.
[12]. R. R. Ramos, D. Biel, E. Fossas, and F. Guinjoan,
(2003). “A fixed-frequency quasi-sliding control algorithm:
Application to power inverters design by means of FPGA
implementation,” IEEE Trans. Power Electron., Vol. 18, No.
1, pp. 344–355.
[13]. W. Stefanutti and P. Mattavelli, (2006). “Fully digital
hysteresis modulation with switching-time prediction”, IEEE
Trans. Ind. Appl., Vol. 42, No. 3, pp. 763– 769.
[14]. M. P. Kazmierkowski, M. A. Dzieniakowski, and W.
Sulkowski, (1991). “Novel space-vector based current
controllers for PWM-inverters”, IEEE Trans. Power Electron.,
Vol. 6, No. 1, pp. 158–166.
[15]. C. T. Pan and T. Y. Chang, (1994). “An improved
hysteresis current controller for reducing switching
frequency”, IEEE Trans. Power Electron., Vol. 9, No. 1, pp.
97–104, Jan.
[16]. A. Tilli and A. Tonielli, (1998). “Sequential design of
hysteresis current controller for three-phase inverter”, IEEE
Trans. Ind. Electron., Vol. 45, No. 5, pp. 771–781.
[17]. J. F. A. Martins, A. J. Pires, and J. F. Silva, (1998). “A
novel and simple current controller for three-phase PWM
power inverters”, IEEE Trans. Ind. Electron., Vol. 45, No. 5,
pp. 802–805.
[18]. E. Aldabas, L. Romeral, A. Arias, and M. G. Jayne, (2006). “Software-based digital hysteresis-band current
controller”, in Proc. Electric Power Appl., pp. 184–190.
[19]. B.-H. Kwon, T.-W.Kim, and J.-H. Youn, (1998). “A novel
SVM-based hysteresis current controller”, IEEE Trans. Power
Electron., Vol. 13, No. 2, pp. 297– 307.
[20]. B.-H. Kwon, B.-D Min, and J.-H.Youm, (1998). “An
improved space-vector based hysteresis current
controller”, IEEE Trans. Ind. Electron., Vol. 45, No. 5, pp.
752–760.
[21]. MohseniAnd M. Islam: (2010). ”New Vector-Based
Hcc Scheme For Three-Phase Pwm Voltage-Source
Inverters”, IEEE Transactions on Power Electronics, Vol. 25,
No. 9, pp. 2299-2309.
[22]. T. A. Lipo, (1988). “Recent progress in the
development of solid-state AC motordrives”, IEEE Trans.
Power Electron., Vol. 3, No. 2, pp. 105–117.
[23]. B. K. Bose, (1992). “Recent advances in power
electronics”, IEEE Trans. Power Electron., Vol. 7, No. 1, pp.
2–16.
[24]. D. M. Brod and D. W. Novotny, (1985). “Current control of VSI-PWM inverters”, IEEE Trans. Ind. Applicat., Vol. IA-21, No. 3, pp. 562–569.
[25]. B. K. Bose,( 1990). “An adaptive hysteresis- band current controller techniquevof a voltage-fed PWM inverter for machine drive system”, IEEE Trans.vInd. Electron., Vol. 37, No. 5, pp. 402–408.
[26]. A. B. Plunkett, (1979). “A current controlled PWM transistor inverter drive”, in Conf. Rec. IEEE-IAS Annu. Meeting, pp. 785–792.
[27]. J. Holtz and E. Bube, (1991). “Field-oriented asynchronous pulse-width modulation for highperformance AC machine operating at low switching frequency”, IEEE Trans. Ind. Applicat., Vol. 27, No. 3, pp. 574–581.
[28]. A. Nabae, S. O. Wara, and Y. Iwagi, (1986). “A novel current scheme for current controlled PWM inverters”, IEEE Trans. Ind. Applicat., Vol. IA-22, No. 4, pp.697–701.
[29]. V. R. Stefanovic and R. M. Nelms, (1991). “Microprocessor control of motor drives and power converters”, Tutorial Course Rec., IEEE-IAS Annu. Meeting, Dearborn, MI, Oct. 1991, pp. 5/1-35.
[30]. D. Wuest and F. Jenni, (1993). “Space vector based current control schemes for voltage source inverters”, Conf. Rec. IEEE PESC'93, Seattle, WA, pp. 986–992.
