References
References
[1]. N. Mohan, T. M. Undeland, and W. P. Robbins, (2003).
Power Electronics, 3rd ed. John Wiley & Sons, Inc.
[2]. B. Bose, (2000). “Energy, environment, and advances
in power electronics”, IEEE Transactions on Power
Electronics, Vol. 15, No. 4, pp. 688-701.
[3]. M. P. Kazmierkowski, R. Krishnan, and F. Blaabjerg,
(2002).Control in Power Electronics. New York:
Academic.
[4]. N. Mohan, T. M. Undeland, and W. P. Robbins, (1995).
“Power Electronics”, 2nd ed. Hoboken, NJ: Wiley.
[5]. A. Linder, (2005). “Model based Predictive Control of
Electrical Drives,” Ph.D. dissertation, Wuppertal Univ,
Wuppertal, Germany.
[6]. J. Rodríguez and C. Cortes, (2012). Predictive control
of Power Converters and Electrical Drives, UK: A Johan
Wiley & Sons, Ltd.
[7]. H. Abu-Rub, J. Guzinski, Z. Krzeminski, and H. A.
Toliyat, (2004). “Predictive current control of voltage
source inverters”, IEEE Transactions on Industrial
Electronics, Vol. 51, No. 3, pp.585–593.
[8]. J. Li, F. Zhuo, X. Wang, L. Wang, and S. Ni, (2009). “A
grid-connected PV system with power quality
improvement based on boost dual-level four leg inverter”,
Proc. IEEE Int. Power Electron. And Motion Control Conf.,
Wuhan, China, pp. 436–440.
[9]. V. Yaramasu, M. Rivera, B. Wu, and J. Rodriguez,
(2013). “Model Predictive Current Control of Two-Level
Four-Leg Inverters—PartI: Concept, Algorithm, and
Simulation Analysis”, IEEE Transactions on Industrial
Electronics, Vol. 28, No. 7, pp. 3459 – 3468.
[10]. R. Vargas, (2007). “Predictive control of a threephase
neutral point clamped inverter”, IEEE Trans. Ind.
Electron., Vol. 54, No.5, pp. 2697–2705.
[11]. S. Muller, U. Ammann, and S. Rees, (2005). “New
time-discrete modulation scheme for matrix converters”,
IEEE Trans. Ind. Electron., Vol. 52, No. 6, pp. 1607–1615.
[12]. J. Holtz and S. Stadtfeld, (1983). “A predictive
controller for the stator current vector of AC machines fed
from a switched voltage source”, in Proc. IPEC, Tokyo,
Japan, pp. 1665–1675.
[13]. R. Kennel, (1984). “Predictive Control Strategy for
Inverters”, Dissertation, Kaiserslautern: Kaiserslautern
University.
[14]. M. Depenbrock, (1988). “Direct Self-Control (DSC) of
inverter-fed induction machine”, IEEE Trans. Power Electron., Vol. 3, No. 4, pp. 420–429.
[15]. E. Flach, R. Hoffmann, and P. Mutschler, (
“Direct mean torque control of an induction motor”, in
Proc. Conf. Rec. EPE, Trondheim, Norway, Vol. 3, pp.
672–677.
[16]. S. V. Emeljanov, (1969). “Automatic Control Systems
with Variable Structure”, Munich, Germany.
[17]. I. Takahashi and T. Noguchi, (1985). “A new quick
response and high efficiency control strategy of an
induction motor”, Conf. Rec. IEEE IAS Annu. Meeting, pp.
1665–1675.
[18]. P. Mutschler, (1998). “A new speed-control method
for induction motors”, Proc. Conf. Rec. PCIM, Nuremberg,
Germany, pp. 131–136.
[19]. O. Kukrer, (1996). “Discrete-time current control of
voltage-fed three-phase PWM inverters”, IEEE Trans. Ind.
Electron., Vol. 11, No. 2, pp. 260–269.
[20]. H. Le-Huy, K. Slimani, and P. Viarouge, (1994).
“Analysis and implementation of a real-time predictive
current controller for permanent-magnet synchronous
servo drives”, IEEE Trans. Ind. Electron., Vol. 41, No. 1, pp.
110–117.
[21]. H. T. Moon, H. S. Kim, and M. J. Youn, (2003). “A
discrete-time predictive current control for PMSM”, IEEE
Trans. Power Electron., Vol. 18, No. 1, pp. 464–472.
[22]. L. Springob and J. Holtz, (1998). “High-bandwidth
current control for torque ripple compensation in PM
synchronous machines”, IEEE Trans. Ind. Electron., Vol. 45,
No. 5, pp. 713–721.
[23]. J. Chen, A. Prodic, R. W. Erickson, and D. Maksimovi,
(2003). “Predictive digital current programmed control”,
IEEE Trans. Power Electron., Vol. 18, No. 1, pp. 411–419.
[24]. R. E. Betz, B. J. Cook, and S. J. Henriksen, (2003). “A
digital current controller for three phase voltage source
inverters”, Conf. Rec. IEEE IAS Annu. Meeting, New
Orleans, LA, pp. 722–729.
[25]. S. J. Henriksen, R. E. Betz and B. J. Cook, (2001).
“Practical issues with predictive current controllers”, Proc.
Australasian Univ. Power Eng. Conf., Perth WA, Australia.
[26]. G. Bode, P. C. Loh, M. J. Newman and D. G. Holmes, 1997). ( “An improved robust predictive current regulation algorithm”, IEEE Trans. Ind. Appl., Vol. 41, No. 6, pp. 1720–1733.
[27]. S. M. Yang and C. H. Lee, (2002). “A deadbeat current controller for field oriented induction motor drives”, IEEE Trans. Power Electron., Vol. 17, No. 5, pp. 772–778.
[28]. Q. Zeng and L. Chang, (2008). “An advanced SVPWM-based predictive current controller for threephase inverters in distributed generation systems”, IEEE Trans. Ind. Electron., Vol. 55, No.3, pp. 1235–1246.
[29]. L. Malesani, P. Mattavelli, and S. Buso, (1999). “Robust dead-beat current control for PWM rectifier and active filters”, IEEE Trans. Ind. Appl., Vol. 35, No. 3, pp. 613–620.
[30]. Y. Nishida, O. Miyashita, T. Haneyoshi, H. Tomita, and A. Maeda, (1997). “A predictive instantaneous-current PWM controlled rectifier with AC-side harmonic current reduction”, IEEE Trans. Ind. Electron., Vol. 44, No. 3, pp. 337–343.
[31]. S. G. Jeong and M. H. Woo, (1997). “DSP-based active power filter with predictive current control”, IEEE Trans. Ind. Electron., Vol. 44, No. 3, pp. 329–336.
[32]. J. Mossoba and P. W. Lehn, (2003). “A controller architecture for high bandwidth active power filters”, IEEE Trans. Power Electron., Vol. 18, No. 1, pp. 317–325.
[33]. S. Buso, S. Fasolo and P. Mattavelli, (2001). “Uninterruptible power supply multi loop employing digital predictive voltage and current regulators”, IEEE Trans. Ind. Appl., Vol. 37, No. 6, pp. 1846–1854.
[34]. P. Mattavelli, (2005). “An improved deadbeat control for UPS using disturbance observers”, IEEE Trans. Ind. Electron., Vol. 52, No. 1, pp. 206–212.
[35]. A. Nasiri, (2007). “Digital control of three-phase series-parallel uninterruptible power supply systems”, IEEE Trans. Power Electron., Vol. 22, No. 4, pp. 1116–1127.
[36]. S. Saggini, W. Stefanutti, E. Tedeschi and P. Mattavelli, (2007). “Digital deadbeat control tuning for dc–dc converters using error correlation”, IEEE Trans. Power Electron., Vol. 22, No. 4, pp. 1566–1570.
[37]. Patricio Cortes, Marian P. Kazmierkowski, Ralph M. Kennel, Daniel E. Quevedo and Jose Rodriguez, ( “Predictive Control in Power electronics and Drives”, IEEE Trans. Ind.Electron., Vol. 55, No. 12,pp. 4312-4324.
[38]. D. W. Clarke, (1996). “Adaptive Predictive Control”, Annual Review in Automatic Programming, Vol. 20, pp. 83-94.
[39]. D. W. Clarke, C. Mohtadi, P. S. Tuffs, (1987) “Generalized Predictive Control. Part I. The basic algorithm”, Automatica, Vol. 23, No. 2, pp. 137-148.
[40]. I. J. Leontaritis, S. A. Bellings, (1985). “Input-Output parametric models for non linear systems part I: deterministic non – linear systems”, International Journal of Control, Vol. 41, No. 2, pp. 303-328,
[41]. I. J. Leontaritis, S. A. Bellings, (1985). “Input-Output parametric models for non linear systems part II: stochastic non – linear systems”, International Journal of Control, Vol. 41, No. 2, pp. 329-344.
[42]. R. Bellman, (1967). “Dynamic Programming and self Adapting control processes”, Munich, Vienna.
[43]. C. E. Gracia, D. M. Prett, M. Morari, (1989). “MODEL PREDICTIVE CONTROL: Theory and Practice- a survey,” Automatica, Vol. 25, No. 3, pp. 335-348.
[44]. A. Bemporad, M. Morari, V. Dua, E. N. Pistikopoulos, (2000). “The Explicit solution of Model Predictive Control via Multiparametric quadratic programming”, American Control Conference ACC2000, Chicago, pp. 872-876.
[45]. Yang Wang and Stephen Boyd, (2010). “Fast Model Predictive Control Using Online Optimization”, IEEE Trans. Control, Vol. 18, No. 2, pp. 267-278.
[46]. C. Bordons, E. F. Camacho, (1998). “A Generalized Predictive Controller for a wide class of industrial processes”, IEEE Transactions on control systems technology, Vol. 6, No.3, pp. 372-387.
[47]. Ali M. Almaktoof, A. K. Raji, and M. T. E. Kahn, (2014). 2008).“Modeling and Simulation of Three-phase Voltage Source Inverter using a Model Predictive Current Control”, International Journal of Innovation, Management and technology, Vol. 5, No. 1.
[48]. S. J. Qin and T. A. Badgwell, ( “A survey of industrial model predictive control technology”, Control Eng. Pract., Vol. 7, pp. 733-764.
[49]. Patricio Cortes, Samir Kouro, Jose Rodriguez, Haitham Abu-Rub, (2010). “Model Predictive Control of Multilevel cascaded H-bridge Inverters”, IEEE Transactions on Industrial Electronics, Vol. 57, No. 8, pp. 2691-2699.
[50]. Hongwei MA, Yongdong LI, Zedoug ZHENG, Lie XU, (2013). “Model Predictive Control of a PWM Rectifier on Unbalanced Grid Voltage Conditions”, Tsinghua university, pp 63-67.
[51]. Thomas J. Vyncke, Steven Thielemans, Jan A. Melkebeek, (2013). “Finite- Set Model Based Predictive Control for Flying Capacitor Converter: Cost Function Design and Efficient FPGA Implementations”, IEEE Transactions on Industrial Informatics, Vol. 9, No. 2, pp. 1113-1121.
[52]. E. I. Silva, B. P. Mcgrath, D. E. Quevedo and G. C. Goodwin, (2007). “Predictive control of a flying capacitor converter”, Proc. Amer. Control Conf., New York, pp. 3763-3768.
[53]. J. Rodriguez, J. Pontt, P. Correa, P. Lezana, and P. Cortes, (2005). “Predictive power control of an AC/DC/AC converter”, Conf. Rec. 40th IEEE IAS Annu. Meeting, Vol.2, pp. 934-939.
[54]. J. Rodriguez, J. Pontt, P. Correa, U. Ammann, and P. Cortes, (2005). “Novel control strategy of an AC/DC/AC converter using power relations”, Proc. Int. Conf. Power Electron. Intell. Control Energy Conservation, Pelincec, Warsaw, Poland. 2003).
