References
[1]. Donachie, Jr, M.J. (2000). “Machining-from Titanium-A
Technical Guide”, ASM International, USA, 2nd edition, pp.
79-84.
[2]. Leyens, C., Peters M. (2003). “Fabrication of Titanium
alloys from Titanium and Titanium alloys (Fundamentals
and Applications),” Weinheim: Wiley –VCH Verlag & Co.
KGGA, pp. 244-247.
[3]. Joshi, V.A. (1983). “Physical Metallurgy of Titanium
Alloys from Titanium Alloys (An Atlas of Structures and
Fracture Features),” New York, CRC Press Taylor & Francis
Group, pp. 7-8.
[4]. Komanduri, R., Reed, Jr. W.R. (1983). “Evaluation of
carbide grades and a new cutting geometry for machining titanium alloys,” Wear, Vol. 92, pp. 113-123.
[5]. Narutaki, N., Murakoshi, A., Motonishi, S. (1983). “Study
on machining of titanium alloys,” Annals of the CIRP, Vol.
32, pp. 65-69.
[6]. Veugopal, K.A., Paul, S., Chattopadhyay, A.B. (2007).
“Growth of tool wear in turning of Ti-6Al-4V alloy under
cryogenic cooling,” Wear, Vol. 262, pp. 1071-1078.
[7]. Hughes, J.I., Sharman, A.R.C., Ridgway, K. (2006). “The
effect of cutting tool material and edge geometry on tool
life and workpiece surface integrity,” Proceeding IMechE,
Part B: Journal of Engineering Manufacture, Vol. 220, pp.
93-107.
[8]. Cotterell, M., Byrne, G. (2008). “Characterisation of
chip formation during orthogonal cutting of titanium alloy
Ti-6Al-4V,” CIRP Journal of Manufacturing Science and
Technology, Vol. 1, pp. 81-85.
[9]. Karpat, Y. (2011). “Temperature dependent flow
softening of titanium alloy Ti6Al4V: An investigation using
element simulation of machining,” Journal of Material
Processing and Technology, Vol. 211, pp. 737-749.
[10]. Jeelani, S., Ramakrishnan, K. (1983). “Subsurface
plastic deformation in machining 6Al-2Sn-4Zr-2Mo titanium
alloy,” Wear, Vol. 85, pp. 121-130.
[11]. Arrazola, P.J., Garay, A., Iriarte, L.M., Armendia, M.,
Marya, S., Maitre, F.L. (2009). “Machinability of titanium
alloys (Ti-6Al-4V and Ti555.3),” Journal of Material
Processing and Technology, Vol. 209, pp. 2223-2230.
[12]. Komanduri, R., Turkovich, B.F.V. (1981). “New
observations on the mechanism of chip formation when
machining titanium alloys,” Wear, Vol. 69, pp. 179-188.
[13]. Komanduri, R. (1982). “Some clarifications on the
mechanics of chip formation when machining titanium
alloys,” Wear, Vol. 76, pp. 15-34.
[14]. Gente, A., Hoffmeister, H.W. (2001). “Chip formation in
machining Ti6Al4V at extremely high cutting speeds,” CIRP
Annals-Manufacturing Technology, Vol. 50, pp. 49-52.
[15]. Wyen, C.F., Wegener, K. (2010). “Influence of cutting
edge radius on cutting forces in machining titanium,” CIRP
Annals-Manufacturing Technology, Vol. 59, pp. 93-96.
[16]. Smolenicki, D., Boos, J., Kuster, F., Roelofs, H., Wyen, C.F. (2014). “In-process measurement of friction coefficient
in orthogonal cutting,” CIRP Annals-Manufacturing
Technology, Vol. 63, pp. 97–100.
[17]. Chiappini, E., Tirelli, S., Albertelli, P., Strano, M.,
Monno, M. (2014). “On the mechanics of chip formation in
Ti–6Al–4V turning with spindle speed variation,”
International Journal of Machine Tools and Manufacturing,
Vol. 77, pp. 16–26.
[18]. Xi, Y., Bermingham, M., Wang, G., Dargusch, M.
(2014). “SPH/FE modeling of cutting force and chip
formation during thermally assisted machining of Ti6Al4V
alloy,” Computational Material Science, Vol. 84, pp.
188–197.
[19]. Shaw, M.C. (2005). “Mechanics of Orthogonal Steady
State Cutting from Metal Cutting Principles,” 2nd edition,
Oxford University Press, New York, pp. 15-38.
[20]. Trent, E.M., Wright, P.K. (2006). “Forces and stresses in
metal cutting from Metal Cutting,” 4th edition, Butterworth-
Heinemann, USA, pp. 57-95.
[21]. Nabhani, F. (2001). “Machining of aerospace titanium
alloys,” Robotic and Computer Integrated Manufacturing,
Vol. 17, pp. 99-106.
[22]. Fang, X.D., Yao, Y., Arndt, G. (1991). “Monitoring
groove wear development in cutting tools via stochastic
modeling of three dimensional vibration,” Wear, Vol. 151,
pp. 143-156.
[23]. Trigger, K.J., Chao, B.T. (1956). “The mechanism of
crater wear of cemented carbide tools,” Transaction of
ASME-Journal of Manufacturing, Vol. 78, pp. 1119-1126.
[24]. Venugopal, K.A., Paul, S., Chattopadhayay, A.B.
(2007). “Growth of tool wear in turning of Ti-6Al-4V alloy
under cryogenic cooling,” Wear, Vol. 262,pp. 1071-1078.
[25]. Colwell, L.V., Truckenmiller, W.C. (1954). “Cutting
characteristics of titanium and its alloys,” Mechanical
Enggineering, Vol. 76, pp. 461-466.
[26]. Che-Haron, C.H. (2001). “Tool Life and surface
integrity in turning titanium alloy,” Journal of Material
Processing and Technology, Vol. 118, pp. 231-237.
[27]. Bhattacharyya, A. (2011). “Surface Integrity from
nd Metal Cutting-Theory and Practice,” 2 edition, New
central book agency (P) Ltd., Kolkata, pp. 497-520.
[28]. Turley, D.M. (1981). “Slow speed machining of
titanium-A Report,” Victoria: Department of Defence,
Defence Science and Technology Organisation Materials
Research Laboratories, Melbourne, MRL-R-833.
[29]. Divakar, C., Bhaumik, S.K., Singh, A.K. (1994). “High
Pressure-High Temperature Processing and Performance of
wBN-cBN Composite Tools,” from Proceedings of the
National Conference on High Pressure Science and
Technology (edited by AK Singh), Bangalore, India, Tata
McGraw Hill, New Delhi, pp. 281-302.
[30]. Ribeiro, M.V., Moreira, M.R.V., Ferreira, J.R. (2003).
“Optimization of titanium alloy (6Al-4V) machining,” Journal
of Material Processing and Technology, Vol. 143-144, pp.
458-463.
[31]. Velasquez, J.D.P., Bolle, B., Chevrier, P., Geandier, G.,
Tidu, A. (2007). “Metallurgical study on chip obtained by
high speed machining of Ti-6Al-4V alloy,” Material Science
and Engineering-A, Vol. 452-453, pp. 469-474.
[32]. Ramesh, S., Karunamoorthy, L., Palanikumar, K.
(2012). “Measurement and analysis of surface roughness in
turning of aerospace titanium alloy (gr5),” Measurement,
Vol. 45, pp. 1266-1276.
