References
[1]. R. Strzelecki and G. Benysek, (2008). “Power Electronics
in Smart Electrical Energy Networks”. New York: Springer,
pp.8–9.
[2]. J. Driesen, P. Vermeyen, and R. Belmans, (2007).
“Protection Issues in Microgrids with Multiple Distributed
Generation Units,” In Proceedings of Power Conversions
Conferences, Nagoya, pp. 646–654.
[3]. K. Maki, S. Repo, and P. Jarventausta, (2004). “Effect of
Wind Power Based Distributed Generation on Protection of
Distribution Network,” In IEEE Developments in Power
Systems Protection, Vol. 1, pp.327–330.
[4]. H.R. Kim, H.S. Choi, H.R. Lim, I.S. Kim, and O.B. Hyun,
(2002). “Resistance of Superconducting Fault Current
Limiters Based on YBa2Cu3O7 Thin Films after Quench
Completion,” Physica C Superconductivity and its
Applications, Vol. 372–376, pp. 1606–1609.
[5]. H.R. Kim, S.W.Yim, S.Y. Oh, and O.B. Hyun, (2008).
“Recovery in Superconducting Fault Current Limiter at Low
Applied Voltages,” IEEE Transactions Applied
Superconductivity, Vol. 18,(2), pp. 656–659.
[6]. H.R. Kim, O.B. Hyun, H.S. Choi, S.D. Cha, and J.M. Oh,
(2003). “Resistance Development in Superconducting
Fault Current Limiters Prior to Quench Completion,” IEEE
Transactions on Applied Superconductivity, Vol. 13(2), pp.
2032–2035.
[7]. B. W. Lee, K. B. Park, J. Sim, I. S. Oh, H. G. Lee, H.R. Kim,
and O. B. Hyun, (2008). “Design and Experiments of Novel
Hybrid Type Superconducting Fault Current Limiters,” IEEE
Transactions on Applied Superconductivity, Vol. 18(2), pp.
624–627.
[8]. G.H. Lee, K.B. Park, J. Sim, Y.G. Kim, I.S. Oh, O. B. Hyun,
and B.W. Lee, (2009). “Hybrid Superconducting Fault Current Limiter of the First Half Cycle Non-limiting Type,” IEEE
Transactions on Applied Superconductivity., Vol. 19(3), pp.
1888–1891.
[9]. Leonard kovalsky, Xing Yuan, Kasegn Tekletsadik,
Albert Keri, Joachim Bock, Frank Breuer, (2005).
“Applications of Superconducting Fault Current Limiters in
Electrical Power Transmission System”, IEEE Transactions on
Applied Superconductivity, Vol.15(2), pp.2130-2133.
[10]. J.S. Kim, S.H. Lim, and J.F. Moon et al., (2009). “Analysis
on the Protective Coordination on Neutral Line of Main
Transformer in Power Distribution Substation with
Superconducting Fault Current Limiter,” The Transactions on
the Korean Institute of Electrical Engineers, Vol. 58(11), pp.
2089–2094.
[11]. U. A. Khan, J. K. Seong, and B. W. Lee, “Feasibility
Analysis of the Positioning of Superconducting Fault Current
Limiters for the Smart Grid Application using Simulink and SimPowersystem,” IEEE Tranactions on Applied
Superconductivity, Vol. 21(3), pp.2165-2169.
[12]. B. W. Lee, K. B. Park, and J. Sim et al., (2008). “Design
and Experiments of Novel Hybrid Type Superconducting
Fault Current Limiters,” IEEE Transactions on Applied
Superconductivity., Vol.18(2), pp. 624–627.
[13]. B. C. Sung, D. K. Park, J. W. Park, and T. K. Ko, (2009).
“Study on a Series Resistive SFCL to Improve Power System
Transient Stability: Modeling, Simulation and Experimental
Verification,” IEEE Transactions Industrial Electronics., Vol.
56(7), pp. 2412–2419
[14]. U. A. Khan,W. J. Shin, J. K. Seong, and B.W. Lee, (2011).
“Feasibility Analysis of the Application and Positioning of DC
HTS FCL in a DC Micro Grid through modeling and
Simulation Using Simulink and SimPowerSystem,” Physica C
Advanced Superconductivity.
