References
[1 ]. IEEE Recommended Practice for Monitoring Electric Power Quality, lEEEStd, 1159-1995,1995.
[2]. Testing and Measurement Techniques Power Quality Measurement Methods, IEC 61000-4-30,2003.
[3]. J.G.Nielsen, M.Newman, H.Nielsen and F.BIaabjerg, "Control and testing of a dynamic voltage restorer (DVR) at medium voltage level," IEEE Trans. Power Electron., vol. 19,no. 3, pp. 806, May 2004.
[4]. N.H. Woodley, "Field experience with dynamic voltage restorer (DVR™MV) systems," in Proc. IEEE Power Eng, Soc. Winter Meeting. Conf., Singapore, 2000, pp. 2864.
[5] . N.H. Woodley, L. Morgan and A.Sundaram, "Experience with an inverter-based dynamic voltage restorer," IEEE Trans. Power Delivery, vol.14, no. 3, pp. 1181, Aug. 1999.
[6] . N.G.Hingorani, "Introducing custom power," IEEE Spectrum, vol. 32, no.6, pp. 41,1995.
[7] . B.Wang and G.Venkataramanan, "Evaluation of shunt and series power conditioning strategies for feeding sensitive loads," in Proc. 127* Annu. IEEE Appl. Power Electron.. Conf., Anaheim, CA, 2004, pp. 1445-1451.
[8] . Z.Changjiang, A.Arulampalam, and NJenkins, "Four-wire dynamic voltage restorer based on a three- dimensional voltage space vector PWM algorithm," IEEE Trans. Power Electron., vol. 18, no. 4, pp. 1093, July 2003.
[9] . W.E. Brumsickle, R.S. Schneider, G.A. Luckjiff, D.M. Divan and M.F. McFranaghan, "Dynamic sag correctors: Cost-effective industrial power line conditioning," IEEE Trans. Ind.Appl., vol.37, no. I ,pp. 212, Jan./Feb.200l.
[10] . M. Vilathgamuwa, A.A.D.R. Perera and S.S. Choi,
"Performance improvement of the dynamic voltage restorer with closed-loop load voltage and current-mode control," IEEE Trans. Power Electron., vol. 17, no. 5, pp. 824, Sep. 2002.
[11] . L.M. Tolbert, RF. Zheng andT.G. Habetler, "Multilevel converters for large electric drives," IEEE Trans. Ind. Appl., vol.35, no. 1 ,pp. 36, Jan/Feb 1999.
[12] . R. Kieferndorf, G. Venkataramanan, and M.D. Manjredar, "Power electronic transformer (PET) fed nine-level H-bridge inverter for large induction motor drives," in Proc. IAS Annu. Meeting Rome, Italy, 2000. pp. 2489-2495.
[13] . J.S. Lai and F.Z. Peng, "Multilevel converters- A new breed of power converters," IEEE Trans. Ind. Appl., vol. 32, no. 3, pp. 509-517, May/Jun. 1996,
[14] . S. Mori, K. Matsuno, T. Hasegawa, S. Ohnishi, M. Takeda, M. Seto, S. Murakami, and F. Lshiguro, "Development of a large static VAR generator using self- commutated inverters for improving power system stability," IEEE Trans. Power Syst., vol. 8, no. 1, pp. 371-377, Feb. 1993.
[15] B.H. Li, S.S. Choi and D.M. Vilathgamuwa,
"Transformerless dynamic voltage restorer," IEEE Power Electrom. Lett., vol. 2, no. 4, pp. 125-130, Apr. 2002.
[16] . RC. Loh, D.M. Vilathgamuwa, S.K. Tang, and H.L. Long, "Multilevel dynamic voltage restorer," IEEE Power Electron. Left., vol. 2, no,4, pp, 125-130, Apr. 2004.
[17] . A.J. Visser, J.H.R. Enslin and H.D.T. Mouton, "Transformer less series sag compensation with a cascaded multilevel inverter," IEEE Trans. Ind. Electron., vol.49, no.4, pp. 824-831, Aug. 2002.
[18] . Y. Fukuta and G. Venkataramanan, "DC bus ripple minimization in cascaded H-bridge multilevel converters under staircase modulation," in Proc. IAS Annu. Meeting, Pittsburgh, PA, 2002, pp. 1988.
[19] . G. Venkataramanan and B. Wang, "Dynamic modeling and control of three phase pulse width modulated power converters using Phasors," in Proc IEEE 35* Power Electron. Spec. Con., Aachen, Germany, 2004, pp. 2822.
[20] . T.H. Crystal and L. Ehrman, "Design and applications of digital filters with complex coefficients," IEEE Trans. Audio Electroacoust.,vo\. Au-16, no.3, pp. 315,1968.
[21] . B. Wang, G. Venkataramanan and M. Illindala "Operation and Control of a Dynamic Voltage Restorer Using Transformer Coupled H- Bridge Converters," IEEE Trans. On Power Electron., vol.21, no.4, July 2006, pp. 1053-1061.
[22] . M. Illindala, "Vector Control of PWM VSI Based Distributed Resources in a Micro Grid," Ph.D. dissertation. Elect. Comput. Eng. Dept., Univ. Wisconsin. Madison, 2004.
[23] . ITI (CBEMA) Curve Application Note, Information Technology Industry Council (ITI) Std., 2000.
[24] . Specification for Semiconductor Processing Equipment Voltage Sag Immunity, SEMI F47-0200 Std., 2000.