i-manager Publications

Flowability of Developed Agglomerated Fluxes During Submerged Arc Welding

Ajay Kumar*, Hari Singh**, Sachin Maheshwari***

** Professor, Department of Mechanical Engineering, National Institute of Technology, Kurukshetra.

*** Professor and Head, Netaji Subhas Institute of Technology, New Delhi.

Periodicity:February - April'2015
DOI : https://doi.org/10.26634/jme.5.2.3253

Abstract

This paper shows an evaluation of a flowability of developed agglomerated fluxes and has been determined. The basic constituents of these fluxes are CaO, SiO₂ and Al₂O₃ Minor additions of MgO, MnO, CaF₂, NiO and Fe-Cr are mixed in the basic constituents as to see the performance in terms of flowability of these developed fluxes on weld metal. The flowability of these fluxes was good and welding behavior in terms of Arc initiation, Arc stability and weld appearance was also good.

Keywords

Submerged arc Welding, Agglomerated Flux, Flowability, Weld Bead

How to Cite this Article?

Kumar, A., Singh, H., and Maheshwari, S. (2015). Flowability of Developed Agglomerated Fluxes During Submerged Arc Welding. i-manager’s Journal on Mechanical Engineering, 5(2), 29-32. https://doi.org/10.26634/jme.5.2.3253

References

[1]. Davis, M.L.E and Bailey, N., (1982). “Properties of submerged arc fluxes a fundamental study”, Metal Construction, Vol. 65, No.6, pp.202-209.

[2]. Jackson, C.E. (1973). “Fluxes and slags in welding”, Bulletin 190. New York: Welding Research Council.

[3]. Silvinski, A.M, et al., (1981). “The physico-chemical and technological properties of CaF -SiO Al O -MgO flux 2 2- 2 3 systems”, Avt. Sevarka, No.7, pp. 31-35.

[4]. Zhilo, N.L. et al., (1985). “Physical properties of flux and slag melts”, Welding production, No.3, pp.35-37.

[5]. Patchett, B.M., (1974). “Some influences of slag composition on heat transfer and arc statiability”, Welding Journal, Vol.53, No.5, pp.203-210.

[6]. Ajay Kumar, Hari Singh, and Sachin Maheshwari (2012). “Modeling of Bead Penetration Behavior for Varying Constituents of Agglomerated Fluxes During Submerged Arc Welding”. i-manager’s Journal on Mechanical Engineering, 2(4) Aug – Oct, 2012 Print ISSN 2230-9055, EISSN 2249-0744, pp. 25-30.

[7]. Ajay Kumar, Hari Singh and Sachin Maheshwari (2013). “A Review Study Of Submerged ARC Welding Fluxes”, imanager’s Journal on Mechanical Engineering. 3(1) Nov – Jan, 2013 Print ISSN 2230-9055, E-ISSN 2249-0744, pp. 44- 52.

[8]. Montgomery Douglas C., (2007). “Design and analysis th of experiments”, 5 . Edition, Wiley-India, pp. 427-445.

[9]. Cochran G and Cox G M., (1962). “Experimental design”, Asia Publishing House, New Delhi.

[10]. Agarwal,S.P., and Khanna. Rajesh., “Physical nd Pharmacy”, 2 Edition, CBS Publishers & Distributors, India, pp. 44-45.

Flowability of Developed Agglomerated Fluxes During Submerged Arc Welding

Abstract

Keywords

How to Cite this Article?

References

If you have access to this article please login to view the article or kindly login to purchase the article

Purchase Instant Access

Options for accessing this content:

	North Americas,UK, Middle East,Europe		India	Rest of world
	USD	EUR	INR	USD-ROW
Pdf	35	35	200	20
Online	35	35	200	15
Pdf & Online	35	35	400	25