Thermodynamic Analysis for Vapour Compression Refrigeration System by Considering Internal Irreversibility with the Help of Designed Computer Software

Ankur Geete*, A. I. Khandwawala**
* Assistant Professor, Department of Mechanical Engineering, S. D. Bansal College of Technology, Indore, Madhya Pradesh, India.
** Retired Professor, Department of Mechanical Engineering, SGSITS, Indore, Madhya Pradesh, India.
Periodicity:February - April'2015
DOI : https://doi.org/10.26634/jme.5.2.3250

Abstract

This work is based on vapour compression refrigeration system. In this research paper, entransy analysis, entropy generation analysis, exergy analysis and coefficient of performance of the system are analyzed. For these analyses, computer software is developed and visual basic language is used to develop this software. The developed software is used to analyze VCR system for different parameters at various operating conditions. Input energy ratio (W ), entransy r dissipation ratio (G ), entropy generation ratio (S ), exergy ratio (φ ) and COP ratio (COP ) are evaluated at different dr gr r r source and sink temperatures. These analyses are also done at different heat capacitances of condenser and evaporator. Then finally, performance characteristic curves are generated for VCR system. These curves help to identify those operating conditions at which optimum performance of VCR system can be achieved. This research work can be concluded as - at maximum source/sink temperatures (320K/273K), entransy dissipation and exergy both quantities are minimum with respect to designed temperatures (310K/263K). And for maximum condenser conductance/minimum evaporator conductance (8/2), entransy dissipation and exergy both quantities are again minimum.

Keywords

Entransy Analysis, Entropy Generation, Internal Irreversibility, VCR (Vapour Compression Refrigeration), Cycle and Visual Basic Software

How to Cite this Article?

Geete, A., and Khandwawala, A. I. (2015). Thermodynamic Analysis for Vapour Compression Refrigeration System by Considering Internal Irreversibility with the Help of Designed Computer Software. i-manager’s Journal on Mechanical Engineering, 5(2), 22-28. https://doi.org/10.26634/jme.5.2.3250

References

[1]. Ananthanarayanan P. N., (2005). “Basic Refrigeration rd and Air Conditioning”, Tata McGraw-Hill, 3 edition.
[2]. Arora C. P., (2000). “Refrigeration and Air Conditioning”, nd Tata McGraw-Hill, 2 edition.
[3]. Acikkapl E., (2014). “Entransy analysis of irreversible Carnot-like heat engine and refrigeration cycles and the relationships among various thermodynamic parameters”, Energy Conversion and Management, Vol.80, pp.535- 542.
[4]. Wu C., Kiang R. L., (1992). “Finite time thermodynamic analysis of a Carnot engine with internal irreversibility”, International Journal of Energy, Vol.17, pp.1173-1178.
[5]. Mohand A Ait-Ali, (1996). “A class of internally irreversible refrigeration cycles”, Journal of Physics D: Applied Physics, Vol. 29, pp.593-599.
[6]. Xiao Q. H., Chen L. G., Sun F.R., (2011). “Constructal entransy dissipation rate minimization for heat conduction based on a tapered element”, Chinese Science Bulletin, Vol. 56, pp.2400-2410.
[7]. Xiao Q. H., Chen L. G., Sun F.R.,(2011). “Constructal entransy dissipation rate minimization for umbrella-shaped assembly of cylindrical fins”, Science China Tech Science, Vol.54, pp.211-219.
[8]. Cheng X.T., Liang X.G., (2012). “Computation of effectiveness of two-stream heat exchanger networks based on concepts of entropy generation, entransy dissipation and entransy-dissipation-based thermal resistance”, Energy Conversion Management, Vol.58, pp.163-170.
[9]. Guo Z.Y., Zhu H.Y., Liang X.G., (2007). “Entransy - a physical quantity describing heat transfer ability”, International Journal of Heat Mass Transfer, Vol. 50, pp.2545-2556.
[10]. Cheng X.T., Liang X.G., (2012). “Entransy loss in thermodynamic processes and its application”, International Journal of Energy, Vol.44, pp.964-972.
[11]. Xu M.T., (2011). “The thermodynamic basis of entransy and entransy dissipation”, International Journal of Energy, Vol. 36, pp.4272-4277.
[12]. Cheng X.T., Wang W.H., Liang X.G., (2012). “Entransy analysis of open thermodynamic systems”, Chinese Science Bulletin, Vol.57, pp.2934-2940.
[13]. Kodal A., Sahin B., Yilmaz T., (2000). “Effects of internal irreversibility and heat leakage on the finite time thermoeconomic performance of refrigerators and heat pumps”, Energy Conversion and Management, Vol.41, pp.607-619.
[14]. Lucia Umberto, (2013). “Entropy generation: From outside to inside”, Chemical Physics Letters, Vol.583, pp.209-212.
[15]. Haseli Y., (2013). “Performance of irreversible heat engines at minimum entropy Generation”, Applied Mathematical Modelling, Vol.37, pp.9810-9817.
[16]. Holzner Steven (2009). “Visual Basic 6.0 Programming st Black Book”, Dream tech Press Publication, 1st edition, pp 67-72.
If you have access to this article please login to view the article or kindly login to purchase the article

Purchase Instant Access

Single Article

North Americas,UK,
Middle East,Europe
India Rest of world
USD EUR INR USD-ROW
Pdf 35 35 200 20
Online 35 35 200 15
Pdf & Online 35 35 400 25

Options for accessing this content:
  • If you would like institutional access to this content, please recommend the title to your librarian.
    Library Recommendation Form
  • If you already have i-manager's user account: Login above and proceed to purchase the article.
  • New Users: Please register, then proceed to purchase the article.