References
[1]. Adams, J., Yang, W., Oglesby, K., & Osborne, K.
(2000).
“The development of Fords P2000 fuel cell vehicle”, Proc.
of the Society of Automotive Engineers, World Congress
2000, SAE paper No. 2000-01-1061.
[2]. Carr, S. J. W., Thanapalan, K. K. T., Zhang, F.,
Guwy, A. J.,
Maddy, J., Gusig, L.-O., & Premier, G. C. (2013).
“Integration of Wind Power and Hydrogen Hybrid Electric
Vehicles into Electric Grids”. In A. Hakansson, M. Höjer, R.
J.
Howlett, & L. C. Jain (Eds.), Sustainability in Energy and
Buildings, Springer Berlin Heidelberg, pp. 261–270.
[3]. Chau, K. T., & Wong, Y. S. (2002).
“Overview of power
management in hybrid electric vehicles”. Energy Conversion
and Management, Vol.43, No.15, pp.1953–1968.
[4]. Drolia, A., Jose, P. & Mohan, N. (2003).
“An approach to
connect ultracapacitor to fuel cell powered electric
vehicle and emulating fuel cell electrical characteristics
using switched mode converter”, In the Proc. of the 29th
IEEE Int. Conf. of the Industrial Electronics Society, Vol. 1,
pp.897–901.
[5]. Farrington, R., &Rugh, J.(2000). “Impact of
Vehicle Air-
Conditioning on Fuel Economy, Tailpipe Emissions, and
Electric Vehicle Range. National Renewable Energy
Laboratory”, In: Earth Technologies Forum Washington,
NREL/CP-540-28960
[6]. Friede, W., Rael, S. &Davat, B. (2004).
“Mathematical
model and characterization of the transient behaviour of a
PEM fuel cell”, IEEE Trans on Power Electronics, Vol. 19, No.
5, pp.1234–1241.
[7]. Hooper, J. M., & Marco, J. (2014).
“Characterising the
in-vehicle vibration inputs to the high voltage battery of an
electric vehicle”. Journal of Power Sources, Vol. 245, pp.
510–519.
[8]. Juraschka, H., Thanapalan, K. K. T., Gusig, L. O.,
&
Premier, G. C. (2014). “Optimization Strategies for
Combined Heat and Power Range Extended Electric
Vehicles”. In S. Helber, M. Breitner, D. Rösch, C. Schön,
J.-M.
G. von der Schulenburg, P. Sibbertsen, A. Wolter (Eds.),
Operations Research Proceedings 2012, pp. 315–320.
Springer International Publishing.
[9]. Juraschka, H.(2012). “Evaluation of Battery-
Electricand
Serial-Hybrid-Powertrains for Road Vehicles”. Bachelor
Thesis, Hochschule Hannover .
[10]. Koehler, J., Strupp, C., Lemke, N.(2009).
“Klimatische
Daten und Pkw - Nutzung Klima-daten und
Nutzungsverhaltenzur Auslegung”, Versuch und Simulation
anKraftfahrzeug-Kaelte-/Heizanlagen in Europa, USA,
China und Indien. FAT- Schriftenreihe224 ,
Forschungsvereinigung Automobiltechnike.V., Berlin
[11]. Li, C. Y., & Liu, G. P. (2009). “Optimal
fuzzy power
control and management of fuel cell/battery hybrid
vehicles”. Journal of power sources, Vol.192, No.2, pp.525-
533.
[12]. Miotti, A., Domenico, A., Guezennec, Y. &
Rajagopalan, S. (2005). “Control-oriented model for an
automotive PEM fuel cell system with imbedded 1+1D
membrane water transport”, in the Proc. of IEEE Conf. on
Vehicle Power and Propulsion.
[13]. Odeim, F., Roes, J., Wülbeck, L.,
&Heinzel, A. (2014).
“Power management optimization of fuel cell/battery
hybrid vehicles with experimental validation”. Journal of
Power Sources, Vol.252, pp.333–343.
[14]. Prokhorov, D. V. (2008). “Toyota Prius HEV
neurocontrol
and diagnostics”. Neural Networks, Vol. 21, No. 2, 3, pp.
458–465.
[15]. Parten, M. and Maxwell, T. (2001).
“Development of a
PEM fuel cell vehicle”, in the Proc. of IEEE Vehicular
Technology Conference'01, Atlantic City, NJ
[16]. Roscher, M., Leidholdt, W., Trepte, J. (2012).
“High
efficiency energy management in BEV applications”. Int.J.
El.Power & Energy Syst., Vol. 37, No. 1, pp. 126-130.
[17]. Thanapalan, K., Zhang, F., Premier, G., Guwy, A.,
&Maddy, J. (2012). “Renewable hydrogen hybrid electric
vehicles and optimal energy recovery systems”. In 2012
UKACC International Conference on Control (CONTROL)
pp. 935–940.
[18]. Thanapalan, K., Zhang, F., Premier, G., &Guwy,
A.
(2012). “Optimal power management of hydrogen fuel
cell vehicles”. In the Proceedings of World Renewable
Energy Forum (WREF2012), Denver, Colorado, USA.
[19]. Thanapalan, K., Williams, J. G., Premier, G. C.,
&
Guwy, A. J. (2011). “Design and implementation of
renewable hydrogen fuel cell vehicles”. Renewable Energy
and Power Quality Journal, Vol. 9, No. 310, pp. 2.
[20]. Thanapalan, K. K. T., Liu, G. P., Williams, J. G.,
Wang,
B., & Rees, D. (2009). “Review and analysis of fuel cell
system modelling and control”. International Journal of
Computer Aided Engineering & Technology, Vol.1, No.2,
pp.145 – 157.
[21]. Thanapalan, K. K. T., Liu, G. P., Williams, J. G.,
& Rees,
D. (2009). “Robust fuzzy controller development for a PEM
fuel cell system”. International Journal of Advanced
Mechatronic Systems, Vol.1, No.3, pp.223–230.
[22]. Thanapalan, K., Williams, J., Liu, G., & Rees,
D. (2008).
“Modelling of a PEM fuel cell system”. In the Proceedings of
17th IFAC World Congress, pp. 4636 – 4641.
[23]. Yu, Q., Srivastava, A., Choe, S. &Gao, W.
(2006).
“'Improved modelling and control of a PEM fuel cell power
system for vehicles”, Proc. of IEEE Southeast Conf'06,
pp.331–336.
[24]. Zhang, F., Thanapalan, K., Procter, A., Carr, S.,
Maddy,
J., & Premier, G. (2013). “Power management control for
off-grid solar hydrogen production and utilisation system”.
International Journal of Hydrogen Energy, Vol.38, No.11,
pp.4334–4341.
[25]. Zhang, J., Lu, X., Xue, J., Li, B. (2008).
“Regenerative
Braking System for series hybrid electric city bus”. The World
Electric Vehicle Journal, Vol.2, No.4, pp.128 – 134.
