Power Quality Improving Using a SPWM Voltage Source Converter

Salla Durga Prasad*, R.S Ravi Sankar**, K. Sravan Kumar***
*PG Scholar, Department of Electrical and Electronics Engineering, Vignan Institute of Information Technology, Visakhapatnam, A.P, India..
**Associate Professor, Department of Electrical and Electronics Engineering, Vignan Institute of Information Technology, Visakhapatnam, A.P, India..
*** Assistant Professor, Department of Electrical and Electronics Engineering, Vignan Institute of Information Technology, Visakhapatnam, A.P, India.
Periodicity:November - January'2015
DOI : https://doi.org/10.26634/jps.2.4.3113

Abstract

Custom Power is the application of power electronics to improve the quality of power distribution for sensitive industrial plants. Industries reporting production stops due to voltage disturbances, like short interruptions and voltage dips. Power electronics converters connected in series or shunt with the grid and equipped with energy storage can provide protection against voltage disturbances. This work focuses on the voltage source converter (VSC) connected in series with the grid for mitigation of voltage dips as well as swell. The core of this work is the dual vector current controller provide the error voltage. By using the pulse width modulation (PWM) we will generate the switching pulses to the voltage source converter which provide the mitigation for sag and swell. The controller consists of two loops as name as voltage control and vector current control loop. In this work PWM is used. Controllable series compensation is used for power quality improvement under sag and swell.

Keywords

Power Electronics, Power Quality, Current Controller, Voltage Dip (Sag, Swell), Voltage Source Converter, PWM.

How to Cite this Article?

Prasad, S. D., Sankar, R. R., and Kumar, K. S. (2015).Power Quality Improving Using a SPWM Voltage Source Converter. i-manager’s Journal on Power Systems Engineering, 2(4), 29-34. https://doi.org/10.26634/jps.2.4.3113

References

[1]. Anton Belan, Martin Liska, Boris Cintula, Zaneta Eleschova, Voltage Sags Evaluating Methods, Power Quality and Voltage Sags Assessment regarding Voltage Dip Immunity of Equipment, Institute of Power and Applied Electrical Engineering, Slovak University of Technology in Bratislava Ilkovicova 3, 812 19 Bratislava, Slovakia.
[2]. O. Anaya-Lara, E. Acha, (2002). "Modeling and analysis of custom power systems by PSCAD/EMTDC," IEEE Trans. Power Delivery, Vol. 17, No.1, pp. 266-272, January.
[3]. H. Awad, (2004). Control of static series compensator for mitigation of power quality problems, Ph.D. dissertation, Chalmers University of Technology, Goteborg, Sweden, April.
[4]. W. Freitas, A. Morelato, (2003). "Comparitive study between power system blockset and PSCAD/EMTDC for transient analysis of custom power devices based on voltage source converter," IPST, New Orleans, USA, pp. 1-6.
[5]. J. W . Choi and S. K. Sul, (1998). Fast current controller in three-phase AC/DC boost converter using d-q axis cross coupling, IEEE Trans. on Power Electronics, Vol. 13, No. 1, pp. 179“185, January.
[6]. Sunil Panda, Anupam Mishra, B. Srinivas, (2009). Control of Voltage Source Inverters using PWM/SVPWM for Adjustable Speed Drive Applications, National Institute Of Technology Rourkela, Rourkela - 769008,May.
[7]. Pulsewidth modulation From Wikipedia, the free encyclopedia.
[8]. F. A. Magueed, A.Sannino, and J. Svensson, (2004). Transient performance of voltage source converter under unbalanced voltage dips, in Proc. of IEEE Power Electronics Specialists Conference 2004 (PESC04), Vol. 2, June, pp.1163“1168
[9]. Massimo Bongiorno, Jan Svensson, Ambra Sannino, Dynamic Performance of Current Controllers for Gridconnected Voltage Source Converters under Unbalanced Voltage Conditions, IEEE.
[10]. Roshani patel, S.N. Purohit. Voltage Quality Improvement using Dynamic Voltage Restorer.
[11]. MHJ Bollen (2000).Voltage power and current ratings of series voltage controllers, in Proc. of IEEE Power Engineering Society Winter Meeting, Vol. 33, No. 2, March-April, pp. 1132“1137.
[12]. Hassan Abdullah Khalid, Ghullam Mustafa Bhutto, (2010). Optimal use of energy storage for series connected voltage source converter, Master of Science Thesis in the Master Degree Programme, Electric Power Engineering, Chalmers University of Technology Goteborg, Sweden.
If you have access to this article please login to view the article or kindly login to purchase the article

Purchase Instant Access

Single Article

North Americas,UK,
Middle East,Europe
India Rest of world
USD EUR INR USD-ROW
Pdf 35 35 200 20
Online 35 35 200 15
Pdf & Online 35 35 400 25

Options for accessing this content:
  • If you would like institutional access to this content, please recommend the title to your librarian.
    Library Recommendation Form
  • If you already have i-manager's user account: Login above and proceed to purchase the article.
  • New Users: Please register, then proceed to purchase the article.