Automation Of Industrial Parameters Monitoring System Using ARM Processor

C. Gunaseelan*, M. Dhilip Kumar**, M.Dhodduraj***, S. Joshua Dhanraj****, M. Jagadeeshraja*****, N. Suthanthira Vanitha******
*-**-***-**** B.E Student, Department of Electrical & Electronics Engineering, Knowledge Institute of Technology, Salem, Tamilnadu, India.
***** Assistant Professor, Department of Electrical & Electronics Engineering, Knowledge Institute of Technology, Salem, Tamilnadu, India.
****** Professor & HOD, Department of Electrical & Electronics Engineering, Knowledge Institute of Technology, Salem, Tamilnadu, India.
Periodicity:August - October'2013
DOI : https://doi.org/10.26634/jes.2.3.2579

Abstract

The main objective of this research paper is to monitor the various physical parameters in the large scale industries in an effective manner for the proper maintenance and to avoid the major accidents in the industries. At present due to the poor real time monitoring system fault identification and system accuracy has becomes very tedious and frequent field visit is required in industries. In order to overcome and provide solution to the existing system Wireless Sensor Networks (WSN) with high speed advanced ARM processor which executes large instructions is used for the implementation of the proposed system. The automatic industrial parameter monitoring system has capable of monitoring multiple boiler sections or any other units at a same time. Zigbee is the emerging wireless network technology which is used for data communication in hardware system. The physical parameters like temperature, pressure and humidity are sensed using the suitable sensors and transmitted through the zigbee module over the wireless network to the base station. The ARM processor is located in the base station programmed in such a manner to receive the data through the zigbee module from multiple boiler units. The simulation of the automated system is achieved by the Keil C µ vision 4 software to get the desired output.

Keywords

ARM 7 processor, Zigbee module, Keil C µ vision 4 software, sensors.

How to Cite this Article?

Gunaseelan.C., Kumar,D.M., Dhodduraj.M., Dhanraj,J.S., Jagadeeshraja.M., and Vanitha,S.N. (2013). Automation Of Industrial Parameters Monitoring System Using ARM Processor. i-manager’s Journal on Embedded Systems, 2(3), 1-7. https://doi.org/10.26634/jes.2.3.2579

References

[1]. Vaneet Singh, Singh.I.P., (2013). ”Environment monitoring and device control using ARM based Embedded Controlled Sensor Network,” IEEE.
[2]. P. Kumar, DR. Murthy Sharma.N.S., (2012). ”Design and Implementation of Arm Intelligent Monitoring system using Zigbee,” International Journal of Research in Computer and Communication technology, IJRCCT, ISSN 2278- 5841, Vol 1, Issue 7.
[3]. P.V. Mane-Deshmukh, B.P. Ladgaonkar, (2013). “Microcontroller PIC 18f4550 Based Wireless Sensor Node to Monitor Industrial Environmental Parameters,” International Journal of Advanced Research in Computer Science and Software Engineering, Volume 3, Issue 10,
[4]. Archana R.Raut, Malik.L.G., (2011). “Zigbee Based Industrial Automation Profile for Power Monitoring Systems,” International Journal on Computer Science and Engineering (IJCSE), Vol. 3 No. 5.
[5]. Mohd Abdul Samad, M.Vera Chary, (2013). ”Design of remote intelligent smart home system based on Zigbee and GSM technology,” International Journal of Engineering Trends and Technology (IJETT), Vol. 4 Issue 9.
[6]. 1. Burrell, Camilli A., Cugnasca. C. E. , Saraiva.A. M., Hirakawa. A. R., and C orrAea P. L. P., (2007). From wireless sensors to field mapping: Anatomy of an application for precision agriculture. Comput. Electron. Agric., 58(I).
[7]. Wang Ping, Wang Zheng. (2007). Design and Implementation of Open Computer Lab Monitoring and Management System, Computer and Modernization, 11:125- 128.
[8]. I. F. Akyildiz, W. Su, Y. Sankarasubramaniam and E. Cayirci, (2002). “Wireless Sensor Networks: a survey”, Computer Networks, Vol.38, pp: 393-422.
[9]. Shizhuang Lin, Jingyu Liu, Yanjun Fang. (2007). “ZigBee Based Wireless Sensor Networks and Its Applications in Industrial”, IEEE International Conference on Automation and Logistics, pp:1979 – 1983.
[10]. BoyuanGuo, YangkuiWu, Zhaojian, etc; ZigBee technology and application - CC2430 design, development and practice; National Defense industry Press.
If you have access to this article please login to view the article or kindly login to purchase the article

Purchase Instant Access

Single Article

North Americas,UK,
Middle East,Europe
India Rest of world
USD EUR INR USD-ROW
Pdf 35 35 200 20
Online 35 35 200 15
Pdf & Online 35 35 400 25

Options for accessing this content:
  • If you would like institutional access to this content, please recommend the title to your librarian.
    Library Recommendation Form
  • If you already have i-manager's user account: Login above and proceed to purchase the article.
  • New Users: Please register, then proceed to purchase the article.