References
[1]. Hull, D. and Clyne, T.W., (1996). An Introduction to
Composite Materials, 2nd ed., Cambridge University Press.
[2]. Ramkumar, J., Aravindan, S., Malhotra, S.K. and
Krishnamoorthy, R., (2004). “An enhancement of the
machining performance of GFRP by oscillatory assisted
drilling”, International Journal of Advanced Manufacturing
Technology, Vol. 23, pp. 240–244.
[3]. Sheikh-Ahmad, J.Y., (2009). Machining of Polymer
Composites, Springer Science + Business Media LLC.
[4]. Sreejith, P. S., Krishnamurthy, R., Malhota, S.K. and
Narayanasamy, K., (2000). “Evaluation of PCD tool
performance during machining of carbon/phenolics
ablative composites”, Journal of Material Processing Technology, Vol. 104, pp. 53-58.
[5]. Ferreira, J.R., Coppini, N.L. and Miranda, G.W.A.,
(1999). “Machining optimization in carbon fibre reinforced
composite materials”, Journal of Material Processing
Technology, Vol. 92, pp. 135-140.
[6]. S. H. Park, (1996). Robust Design and Analysis for Quality
Engineering, Chapman & Hall, London.
[7]. M. S. Phadke, (1989). Quality Engineering using Robust
Design, Prentice-Hall, Englewood Cliffs, NJ,
[8]. Praveen Raj, P. and Elaya Perumal, A., (2010). “Taguchi
analysis of surface roughness and delamination
associated with various cemented carbide K10 end mills in
milling of GFRP”, Journal of Engineering Science and
Technology Review, Vol. 3, pp. 58-64.
[9]. Julie Zhang, Z., Joseph Chenb, C. and Daniel Kirby, E.,
(2007). “Surface roughness optimization in an end-milling
operation using the taguchi design method”, Journal of
Materials Processing Technology, Vol. 184, pp. 233–239.
[10]. Paulo Davim, J., (2001). “A note on the determination
of optimal cutting conditions for surface finish obtained in
turning using design of experiments”, Journal of Material
Process Technology, Vol. 116, pp. 305–308.
[11]. Paulo Davim, J. and Pedro Reisand, P., (2005).
“Damage and dimensional precision on milling carbon
fibre-reinforced plastics using design experiments”, Journal
of Materials Processing Technology, Vol. 160, pp. 160–167.
[12]. Ghani, J.A., Choudhury, I.A. and Hassan, H.H.,
(2004). “Application of taguchi method in the optimization
of end milling parameters”, Journal of Materials Processing
Technology, Vol. 145, pp. 84–92.
[13]. Lin, J.L., Wang, K.S., Yan, B.H. and Tarng, Y.S., (1998).
“Optimizing of the multi-response process by taguchi
method with grey relational analysis”, The Journal of Grey
System, Vol. 10, No. 4, pp. 355-370.
[14]. Bala Murugan, G., Biswanath, M. and Sukamal, G.,
(2009). “Optimization of machining parameters for hard
machining: grey relational theory approach and ANOVA”,
International Journal of Advanced Manufacturing
Technology, Vol. 45, pp. 1068–1086,
[15]. Deng, J., (1999). “Introduction grey system”, Journal
of Grey System, Vol. 1, pp. 1–24, 1989.
[16]. Lin, J.L., Wang, K.S., Yan, B.H. and Tarng, Y.S., “A study
of the grey-based taguchi method for optimizing the multiresponse
process”, The Journal of Grey System, Vol. 11, No.
3, pp. 257-277,
[17]. Ahilan, C., Kumanan, S. and Sivakumaran, N., (2010).
“Application of grey based taguchi method in
multiresponse optimization of turning process”, Advances
in Production Engineering & Management, Vol. 5, No. 3,
pp. 171-180,
[18]. Hakan Aydin, Ali Bayram, Ugur Esme, (2010). Yigit
Kazancoglu and Onur Guven, Application of grey relation
analysis (GRA) and taguchi method for the parametric
optimization of friction stir welding (FSW) process, Materials
and Technology, Vol. 44, No. 4, pp. 205–211,
[19]. Gopalakannan, S., Senthilvelan, T. and
Ranganathan, S., (2013). “Statistical optimization of EDM
parameters on machining of aluminium hybrid metal
matrix composites by applying taguchi based grey
analysis”, Journal of Scientific & Industrial Research, Vol. 72,
pp. 358-365.
[20]. Paulo Davim, J. and Mata, F., (2005). “A new
machinability index in turning fibre reinforced plastics”,
Journal of Materials Processing Technology, Vol. 170, pp.
436–440.
[21]. Paulo Davim, J. and Mata, F., (2007). “New machinability study of glass fibre reinforced plastics using
polycrystalline diamond and cemented carbide (K15)
tools”, Material Design, Vol. 28, pp. 1050– 1054.
[22]. Wang, X.M. and Zhang, L.C., (2003). “An
experimental investigation into the orthogonal cutting of
unidirectional fibre reinforced plastics”, International
Journal of Machine Tools Manufacturing, Vol. 43, pp.
1015–1022.
[23]. Palanikumar, K., Karunamoorthy, L. and Karthikeyan,
R., (2006). “Assessment of factors influencing surface
roughness on the machining of glass fibre-reinforced
polymer composites”, Material Design, Vol. 27, pp. 862–
871.
[24]. Neseli, S., Yaldizand, S. and Turkes, E., (2011).
“Optimization of tool geometry parameters for turning
operations based on the response surface methodology”,
Measurement, Vol. 44, pp. 580–587.
[25]. Singh, I. and Bhatnagar, N., (2006). “Drilling of unidirectional
glass fibre reinforced plastic (UD-GFRP)
composite laminates”, International Journal of Advanced
Manufacturing Technology, Vol. 27, pp. 870–876.
[26]. Datta, S., Bandyopadhyay, A. and Pal, P. K. (2008).
“Grey-based taguchi method for optimization of bead
geometry in submerged arc bead-on-plate welding”,
International Journal of Advanced Manufacturing
Technology, Vol. 39, pp. 1136–1143.
