References
[1].Ned Mohan, (2003). First course on Power Electronics and Drives
[3]. P.C. Sen (2003). Power Electronics, circuits, Devices &
Applications, 3rd edition.
[4]. Rashid H.Muhammad, (2004). Power Electronics –
Circuits, Devices and Applications, Prentice Hall India.
[5]. Bimbra P.S., (2007). Power Electronics, Khanna
Publishers,
[6]. SG3524 Datasheet and Circuit Schematic Overview.
[7]. Yungtaek Jang and Milan M. Jovanovic, (2006 ). “A
New PWM ZVS Full-Bridge Converter”, IEEE Trans., Power
Electronics Vol. 2, No. 3, June, pp 331-337.
[8]. Deepak Kumar Nayak and S.Rama Reddy, (2010).
“Simulation of Soft Switched Pwm Zvs Full Bridge
Converter”, IEEE Trans. Power Electronics Vol. 2, No. 3,
June, pp 595-601.
[9]. Wen Kang, (2000). “A Line and Load Independent
Zero Voltage Switching DC/DC Full Bridge Converter
topology” A Thesis in the Department of Electrical and
Computer Engineering,
[10]. J.A. Sabaté, V. Vlatkovic, R.B. Ridley, and F.C. Lee,
(1991). “High-voltage, high-power, ZVS, full-bridge PWM
converter employing an active snubber,” IEEE APEC'91
Rec., pp. 158-163,
[11]. R. Redl, N.O. Sokal, and L. Balogh, (1991). “A novel
soft-switching full-bridge dc/dc converter: Analysis,
design considerations, at 1.5kW, 100kHz,” IEEE Trans.
Power Electron., Vol.6, No.3, July, pp.408-418.
[12]. W. Chen, F.C. Lee, M.M. Jovanovic, and J.A. Sabaté,
(1995). “A comparative study of a class of full bridge zerovoltage-
switched PWM converters,” IEEE APEC'95 Rec.,
pp. 893-899,
[13]. P.K Jain, W. Kang, H. Soin, and Y. Xi, (2002). “Analysis
and design considerations of a load and line
independent zero voltage switching full bridge DC/DC converter topology,” IEEE Trans. Power Electron., vol 17,
no. 5, pp. 649 - 657, Sep.
[14]. R. Ayyanar and N. Mohan, (2001) “Novel softswitching
DC-DC converter with full ZVS-range and
reduced filter requirement – Part I: Regulated output
applications,” IEEE Trans. Power Electron., Vol. 16., No. 2,
pp. 184-192, Mar.
[15]. Y. Jang and M.M. Jovanovic, (2004). “A new family
of full-bridge ZVS converters,” IEEE Trans. Power Electron.,
Vol. 19., No. 3, pp. 701-708,May.
[16]. A.J. Mason and P.K. Jain, (2005). “New phase shift
modulated ZVS full-bridgeDC/DC converter with
minimized auxiliary current for medium power fuel cell
application,” IEEE Power Electronics Specialists Conf.
(PESC)Proc., pp. 244-249.
[17]. R. Redl, N. O. Sokal, and L. Balogh, (1991). “A novel
soft- switching full bridge dc–dc converter: analysis,
design considerations, at 1.5 kW, 100kHz,” IEEE Trans.
Power Electron., Vol. 6, No. 4, pp. 408– 418,Jul.
[18]. J. A. Sabaté, V. Vlatkovic´, R. B. Ridley, and F. C. Lee,
“High-voltage,high- power, ZVS, full- bridge PWM converter
employing an active snubber,” in Proc. IEEE APEC'91, 991,
pp. 158–163.
[19]. W. Chen, F. C. Lee, M. M. Jovanovic´, and J. A.
Sabaté, (1995). “A comparative study of a class of full
bridge zero-voltage- switched PWM converters,” in Proc.
IEEE APEC'95,, pp. 893–899.
[20]. P. K. Jain, W. Kang, H. Soin, and Y. Xi, (2002). “Analysis
and design considerations of a load and line
independent zero voltage switching full bridge DC/DC
converter topology,” IEEE Trans. Power Electron. Vol.17,
No. 5, pp. 649–657, Sep.
[21]. J. Mason and P. K. Jain, (2005). “New phase shift
modulated ZVS full bridge DC/DC converter with
minimized auxiliary current for medium power fuel cell
application,” in Proc. IEEE Power Electron. Spec. Conf
(PESC), pp. 244–249.
