i-manager Publications

A Numerical Study on Plunger Leakage for Beam Pump Systems

Yasser Rihan*

Hot Laboratories Center, Atomic Energy Authority, P.O. 13759, Cairo, Egypt.

Periodicity:August - October'2013
DOI : https://doi.org/10.26634/jfet.9.1.2480

Abstract

In this paper a numerical model for calculating plunger pump leakage is introduced. This model involves calculating the velocity profile for an annulus with the inner wall moving parallel to the outer wall. The calculated average velocity for the annular fluid is used to predict the fluid slippage. The new method for the slippage agrees with published formula at the same operating conditions. The numerical model is used to predict the fluid slippage at different operating conditions.

Keywords

Plunger, Pump, Leakage, Numerical, Modeling.

How to Cite this Article?

Rihan,Y. (2013). A Numerical Study on Plunger Leakage for Beam Pump Systems. i-manager’s Journal on Future Engineering and Technology, 9(1), 27-31. https://doi.org/10.26634/jfet.9.1.2480

References

[1]. Liu, X., Qi, Y. March (2011). A modern approach to the selection of sucker rod pumping systems in CBM wells, Journal of Petroleum Science and Engineering, Vol. 76, Issues 3-4, pp. 100-108.

[2]. Robert, L., Tchobanoglous, G., Bosserman, B., and Jones, G. (1998). Pumping station design, 2nd edition, Butterworth-Heinemann.

[3]. World Pumps. May (2003). Renamed plunger pump gets new look.

[4]. World Pumps. June (2003). Mid-size plunger pump.

[5]. Guo-hua, L., Shun-li, H., Zhi, Y., Hai-yang, Z., Jing-hong, H., Quan, X., Ying-hao, S. (2012). A prediction model for a new deep-rod pumping system, Journal of Petroleum Science and Engineering, Vol. 80, pp. 75-80.

[6]. Akers, T.J., et al. April (2009). Well plunger and plunger seal for plunger lift pumping system, Sealing Technology.

[7]. Azouz, I., and Shirazi, S.A. (1998). Evaluation of several turbulence models for turbulent flow in concentric and eccentric annuli, Trans. ASME, Vol. 120, pp. 268-275.

[8]. Ma, J., Fang, B., Xu, B., Yang, H. (2010). Optimization of cross angle based on the pumping dynamics model, J. Zhejiang Univ. Sci. A, Vol. 11, No. 3, pp. 181-190.

[9]. Bergada, J.M., Kumar, S., Davies, D., Watton, J. (2012). A complete analysis of axial piston pump leakage and output flow ripples, Applied Mathematical Modelling, Vol. 36, pp. 1731-1751.

[10]. Patterson, John, Curfew, J., Brock, M., Braaten, D., Dittman, J., and Williams, B. (2000). Progress report 3. Fluid slippage in down-hole rod-drawn oil well pumps, Proc. Forty-Seventh Annual Southwestern Petroleum Short Course, Lubbock, Texas, pp. 117-136.

[11]. Patterson, John, Curfew, J., Hill, J., Braaten, D., Dittman, J., and Williams, B. (1999). Progress report 2. Fluid slippage in down-hole rod-drawn oil well pumps, Proc. Forty-Sixth Annual Southwestern Petroleum Short Course, Lubbock, Texas, pp. 96-106.

[12]. Patterson, John and Williams, B.J. (1998). A progress report on fluid slippage in down-hole rod-drawn oil well pumps, Proc. Forty-Fifth Annual Southwestern Petroleum Short Course, Lubbock, Texas, pp. 180-191.

[13]. Lea, James, F. (1990). Modeling forces on a beam pump system when pumping highly viscous crude, Annual Tech. Conf. and Exhibition, New Orleans.

	North Americas,UK, Middle East,Europe		India	Rest of world
	USD	EUR	INR	USD-ROW
Pdf	35	35	200	20
Online	35	35	200	15
Pdf & Online	35	35	400	25

A Numerical Study on Plunger Leakage for Beam Pump Systems

Abstract

Keywords

How to Cite this Article?

References

If you have access to this article please login to view the article or kindly login to purchase the article

Purchase Instant Access

Options for accessing this content: