References
[1]. Bala, N., Singh, H., & Prakash, S. (2010). High
Temperature Corrosion Behavior of Cold Spray Ni-20Cr
Coating on Boiler Steel in Molten Salt Environment at 900oC. Journal of Thermal Spray Technology, 19 (1-2), 110-118.
[2]. Bala, N., Singh, H., & Prakash, S. (2010). Accelerated
hot corrosion studies of cold spray Ni–50Cr coating on
boiler steels. Materials and Design, 31, 244–253.
[3]. Balani, K., Agarwal, A., & Seal, S. (2005). Transmission
electron microscopy of cold sprayed 1100 aluminum
coating', Scripta Mater, 53, 845–850.
[4]. Gao, Y., Chen, M.C., & Shi, C.X. (1999). Study on EBPVD
Zirconia thermal barrier coatings for gas turbine blade
protection. Materials and Manufacturing Processes, 14 (5),
691–696.
[5]. Goyal, T., Walia, R.S., & Sidhu, T.S. (2012). Effect of
Parameters on Coating Density for Cold Spray Process.
Materials and Manufacturing Processes, 27( 2), 193–200.
[6]. Goyal, T., Walia, R.S., & Sidhu, T.S. (2012). Study of
Coating Thickness of Cold Spray Process Using Taguchi
Method. Materials and Manufacturing Processes, 27(2),
185–192.
[7]. Gurrappa, I. (2000). Hot corrosion of protective
coatings. Materials and Manufacturing Processes, 15(5),
761–773.
[8]. Kalsi, S.S., Sidhu, T.S., & Singh H. (2013). Chlorine based
hot corrosion study of cold sprayed NiCrAlY coating.
Surface Engineering, DOI 10.1179/1743294413Y.
0000000233.
[9]. Kalsi, S.S., Sidhu, T.S., & Singh H. (2014). Performance of
cold spray coatings on Fe-based superalloy in Na2SO4-
NaCl environment at 900oC, Surface and Coating
Technology, DOI 10.1016/j.surfcoat.2014.01.001.
[10]. Li, C.J., Li, W.Y., & Wang, Y.Y. (2005). Formation of
metastable phases in cold-sprayed soft metallic deposit.
Surface and Coating Technology, 198(1-3), 469–473.
[11]. Matsubara, Y., Sochi, Y., Tanabe, M., & Takeya, A,
(2007). Advanced Coatings on Furnace Wall Tubes.
Journal of Thermal Spray Technology, 16(2),195–201.
[12]. Morgan, R., Fox, P., & Pattison, J. (2004). Analysis of
cold gas dynamically sprayed aluminium deposits. Mater
Letters, 58, 1317–1320.
[13]. Patnalk, P.C., & Immarigeon, J.P. (1989). Protective coatings for aero engine hot section components.
Materials and Manufacturing Processes, 4(3), 347–384.
[14]. Rapp, R.A. (1986). Chemistry and electrochemistry of
the hot corrosion of metals. Corrosion, 42, 568–577.
[15]. Rapp, R.A., & Zhang, Y.S. (1994). Hot corrosion of
materials: Fundamental studies. JOM, 46(12), 47–55.
[16]. Richer, P., Yandouzi, M., Beauvais, L., & Jodoin, B.
(2010). Oxidation behaviour of CoNiCrAlY bond coats
produced by plasma HVOF and cold gas dynamic
spraying. Surface and Coatings Technology, 204,
3962–3974.
[17]. Sidhu, B.S., & Prakash, S. (2006). Erosion-corrosion of
plasma as sprayed and laser remelted Stellite-6 coatings in
a coal fired boiler. Wear, 260, 1035–1044.
[18]. Sidhu, T.S., (2006). PhD thesis, Met. & Mat. Eng. Dept.,
IITR, Roorkee, India.
[19]. Sidhu, T.S., Agrawal, R.D., & Prakash, S. (2005). Hot
corrosion of some superalloys and role of high-velocity oxyfuel
spray coatings—a review. Surface and Coatings
Technology, 198, 441– 446.
[20]. Singh, H., Sidhu, T.S., & Kalsi, S.B.S. (2012). Cold spray
Technology future of coating deposition process. Frattura
ed Integrità Strutturale, 22, 69–84.
[21]. Singh, H., Sidhu, T.S., Kalsi, S.B.S., & Karthikeyan, J.
(2013). Development of cold spray from innovation to
emerging future coating technology. Journal of Brazilin
Society Mechanical Science and Engineering, DOI
10.1007/s40430-013-0030-1.
[22]. Sundararajan, T., Kuroda, S., & Abe, F. , (2004). Steam
Oxidation Studies on 50Ni-50Cr HVOF Coatings on 9Cr-1Mo
Steel: Change in Structure and Morphology across the
Coating/Substrate Interface, Mater. Trans., 45(4),
1299–1305.
[23]. Van-Steenkiste, T.H., Smith, J.R., & Teets, R.E. (2002).
Aluminum coatings via kinetic spray with relatively large
powder particles, Surface and Coating Technology, 154(2-
3), 237–252.
[24]. Zhang, H.B., Zhang, J.B., & Liang, Y. L. (2008).
Microstructures of cold-sprayed Ni coating (in Chinese).
Chinese J Nonferrous Met, 18, 1421–1425.
[25]. Zou, Y., Qin, W., & Irissou, E. (2009). Dynamic
recrystallization in the particle/particle interfacial region of
cold-sprayed nickel coating: Electron backscatter
diffraction characterization, Scripta Matern, 61, 899–902.
[26]. Zou, Y.,Goldbaum, D., & Szpunar, J.A. (2010).
Microstructure and nanohardness of cold-sprayed
coatings: Electron backscattered diffraction and nanoindentation
studies, Scripta Mater, 62, 395–398.
