i-manager Publications

Hybrid Active Power Filter Design for 3-Phase, 4-wire System for Different Loads to Enhance Power Quality Using PSO

S. Praveena*, B. Suresh Kumar**, K.P. Krishna Prasad***

* Assistant Professor, Department of ECE, M.G.I.T, Hyderabad.

** Assistant Professor, Department of EEE, C.B.I.T, Hyderabad.

*** P.G Scholar, Department of EEE, C.B.I.T, Hyderabad.

Periodicity:May - July'2013
DOI : https://doi.org/10.26634/jps.1.2.2364

Abstract

This paper proposes an optimal design method for an hybrid active power filters (HAPFs) set at high voltage levels to satisfy the requirements of Harmonic filtering, Power factor correction and reactive power compensation for Different Loads to Enhance Power Quality Using PSO [16]-[19]. Multi objective Optimization models for HAPF were constructed. Detuning effects and faults were also considered by constructing Constraints during the optimal process, which improved the reliability and practicability of the designed filters. Furthermore, the Particle swarm optimization algorithm was developed for searching an optimal solution of planning of filters.

Keywords

Hybrid Active Power Filters (HAPF), Multiobjective Optimization, Particle Swarm Optimization (PSO), Total Harmonic Distortion (THD), Power Factor, Reactive Power

How to Cite this Article?

Praveena, S., Kumar, B. S., and Prasad, K. P. K. (2013). Hybrid Active Power Filter Design For 3-Phase, 4-Wire System For Different Loads To Enhance Power Quality Using PSO. i-manager’s Journal on Power Systems Engineering, 1(2), 37-45. https://doi.org/10.26634/jps.1.2.2364

References

[1]. V. E. Wanger, (1993). “Effects of harmonics on equipment,” IEEE Trans. Power Del., Vol. 8, No. 2, pp. 672–680.

[2]. J. C. Das, (2004). “Passive filters-potentialities and limitations,” IEEE Trans. Ind.Appl, Vol. 40, No. 1, pp. 232–241.

[3]. K. K. Shyu, M. J. Yang, Y. M. Chen, and Y. F. Lin, (2008). “Model reference adaptive control design for a shunt active-power-filter system,” IEEE Trans. Ind. Electron., Vol. 55, No. 1, pp. 97–106.

[4]. L. Asiminoaei, E. Aeloiza, P. N. Enjeti, and F. Blaabjerg, (2008). “Shunt activepower-filter topology based on parallel interleaved inverters,” IEEE Trans.Ind. Electron., Vol. 55, No. 3, pp. 1175–1189.

[5]. A. Luo, Z. K. Shuai, W. J. Zhu, and Z. J. Shen, (2009). “Combined system for harmonic suppression and reactive power compensation,” IEEE Trans. Ind. Electron., Vol. 56, No. 2, pp. 418–428.

[6]. B. Singh and V. Verma, (2006). “An indirect current control of hybrid power filter for varying loads,” IEEE Trans. Power Del., Vol. 21, No. 1, pp. 178–184.

[7]. D. Rivas, L. Moran, J. W. Dixon, and J. R. Espinoza, (2003). “Improving passive filter compensation performance with active techniques,” IEEE Trans. Ind. Electron., Vol. 50, No. 1, pp. 161–170.

[8]. V. F. Corasaniti, M. B. Barbieri, P. L. Arnera, and M. I. Valla, (2009). “Hybrid active filter for reactive and harmonics compensation in a distribution network,” IEEE Trans. Ind. Electron., Vol. 56, No. 3, pp. 670–677.

[9]. K. P. Lin, M. H. Lin, and T. P. Lin, (1998). “An advanced computer code for single-tuned harmonic filter design,” IEEE Trans. Ind. Appl., Vol. 34, No. 4, pp. 640–643.

[10]. C. J. Chou, C. W. Liu, J. Y. Lee, and K. D. Lee, (2000). “Optimal planning oflarge passive-harmonic-filter set at high voltage level,” IEEE Trans. PowerSyst., Vol. 15, No. 1, pp. 433–441.

[11]. Y. M. Chen, (2003). “Passive filter design using genetic algorithms,” IEEE Trans. Ind. Electron., Vol. 50, No. 1, pp. 202–207.

[12]. Z. S. Guang, W. Y. Ping, and J. L. Cheng, (2004). “Adaptive genetic algorithm based optimal design approach for passive power filters,” Proc. Chin. Soc. Elect. Eng., Vol. 24, No. 7, pp. 173–176.

[13]. Y. P. Chang and C. J. Wu, (2005). “Optimal multiobjective planning of large scale passive harmonic filters using hybrid differential evolution method considering parameter and loading uncertainty,” IEEE Trans. Power Del., Vol. 20, No. 1, pp. 408–416.

[14]. B. Duro, V. S. Ramsden, and P. Muttik, (1999). “Minimization of active filter rating in high power hybrid filter system,” in Proc. IEEE Int. Conf. Power Electron. Drive Syst., Hong Kong, pp. 1043–1048.

[15]. HE et al.: Application of PSO to Passive and Hybrid Active Power Filter Design 2851.

[16]. C. J. Ling, J. X. Jian, and Z. D. Qi, (2006). “Multiobject optimization of hybrid active power filter based on genetic algorithm,” J. Tsinghua Univ. Sci. Technol., Vol. 46, No. 1, pp. 5–8.

[17]. J. Kennedy and R. Eberhart, (1995). “Particle swarm optimization,” in Proc. IEEE Int. Conf. Neural Netw., Perth, Australia, Vol. 4, pp. 1942–1948.

[18]. Y. D. Valle, G. K. Venayagamoorthy, S. Mohagheghi, J. C. Hernandez, and R. G. Harley, (2008). “Particle swarm optimization: Basic concepts, variants and applications in power systems,” IEEE Trans. Evol. Comput., Vol. 12, No. 2, pp. 171–195.

[19]. L. S. Coelho and B. M. Herrera, (2007). “Fuzzy identification based on a chaotic particle swarm optimization approach applied to a nonlinear Yo-yo motion system,” IEEE Trans. Ind. Electron., Vol. 54, No. 6, pp. 3234–3245.

[20]. S. Dutta and S. P. Singh, (2008). “Optimal rescheduling of generators for congestion management based on particle swarm optimization,” IEEE Trans. Power Syst., Vol. 23, No. 4, pp. 1560–1569.

If you have access to this article please login to view the article or kindly login to purchase the article

Single Article

	North Americas,UK, Middle East,Europe		India	Rest of world
	USD	EUR	INR	USD-ROW
Online	15	15

ADD TO CART

Options for accessing this content:

If you would like institutional access to this content, please recommend the title to your librarian.
If you already have i-manager's user account: Login above and proceed to purchase the article.
New Users: Please register, then proceed to purchase the article.