i-manager Publications

Tuning Of Analog Controllers For Superheated Steam Temperature System Using Genetic Algorithm

Yasmine begum*, Venkata Marutheswar**

* Assistant Professor, Department of Electronics and Instrumentation Engineering, Sree Vidyanikethan Engineering College, Tirupati, India.

** Professor, Department of Electrical and Electronics Engineering, S.V. University, Tirupati, India.

Periodicity:May - July'2013
DOI : https://doi.org/10.26634/jic.1.3.2351

Abstract

This paper explains the tuning of analog controllers P, PI and PID for superheated steam temperature system using Genetic Algorithm based on ISE, IAE and ITAE as the objective function. The analog controllers have a wide range of applications in industrial control. The fifth order model of superheated steam temperature system is taken for study. Most –τs of the tuning algorithms are based on FOPTD models which is given by G(s) = Ke /(Ts+1). If the plant is not approximated well to FOPTD model, good controllers may not be designed using existing algorithms. Genetic algorithm is a stochastic algorithm based on principles of natural selection and genetics. To tune the analog controllers using genetic algorithm, it does not require any FOPTD model. Hence the analog controllers P, PI and PID are tuned using genetic algorithm for superheated steam temperature system and the results are compared

Keywords

First Order Plus Time Delay (FOPTD), Proportional Integral Derivative (PID), Integral Square Error (ISE), Integral Of The Time-Weighted Absolute Error, Superheated Steam Temperature System (SHS).

How to Cite this Article?

Begum, A.Y., and Marutheswar, G.V. (2013). Tuning of Analog Controllers for Superheated Steam Temperature System using Genetic Algorithm. i-manager’s Journal on Instrumentation and Control Engineering, 1(3), 8-13. https://doi.org/10.26634/jic.1.3.2351

References

[1]. Sadasiva Rao, M. V., & Chidambaram, M.(2006). “PID controller tuning of a cascade control systems using genetic algorithm,” Journal of Indian Institute of Science, Vol.86, pp.343-354.

[2]. Grefinstette,J.J. (1986).“Optimization of control parameters for genetic algorithms,” IEEE Trans. systems, Man cybernetics, Vol.16, pp.122-128.

[3]. Keyu Li. (2013). “PID Tuning for Optimal Closed-Loop Performance with Specified Gain and Phase Margins,” IEEE Transaction on Control Systems Technology, Vol. 21, No.3, pp.132-142.

[4]. Sreenivasulu, G., & Reddy, S. N. (2003). “Performance Evaluation of Superheated Steam Temperature Control System based on tuning methods of analog controllers,” IETE Journal of research, Vol.49, pp. 399-404.

[5]. Nagarth, I. J., & Gopal, M. (2000). Control System Engineering, 2nd edition, New age International, India.

[6]. Shinskey, F. J. (1988). Process control systems: Application design & adjustment, McGraw-Hill, India.

[7]. The Bharath Heavy Electricals Limited, Hyderabad: Transfer function of a Super heated Steam Temperature System of 500MW boiler, R&D Technical Information Sheet.

	North Americas,UK, Middle East,Europe		India	Rest of world
	USD	EUR	INR	USD-ROW
Online	200	35	35	200	15
Pdf	35	35	200	20
Pdf & Online	35	35	400	25

Tuning Of Analog Controllers For Superheated Steam Temperature System Using Genetic Algorithm

Abstract

Keywords

How to Cite this Article?

References

If you have access to this article please login to view the article or kindly login to purchase the article

Purchase Instant Access

Options for accessing this content: