i-manager Publications

Performance Optimization Of Regenerative Feed Water System In Thermal Power Plant

Ankur Garg*

Assistant Professor, Department of Mechanical Engineering, GIMT Kurukshetra, India.

Periodicity:May - July'2013
DOI : https://doi.org/10.26634/jic.1.3.2350

Abstract

The significant efficiency advantage of the Carnot cycle over the Rankine cycle is due to the fact that in the Carnot cycle all external heat addition is at a single high temperature and all external heat rejection at a single low temperature. The Rankine-cycle thermal efficiency could be improved by increasing the average water temperature at which heat is received. This could be accomplished by an internal transfer of heat from higher-temperature steam to lowtemperature feed water. An internal transfer of heat that reduces or eliminates low-temperature additions of external heat to the working fluid is known as regeneration. Regeneration is accomplished in all large-scale, modern power plants through the use of feed water heaters. A Feed Water Heater (FWH) is a heat exchanger in which the latent heat (and sometimes superheat) of small amounts of steam is used to increase the temperature of liquid water (feed water) flowing to the steam generator. There are two types of feed water heaters, (i) Open Feed water heaters and (ii) Closed Feed water heaters

Keywords

PTPS, LPH 3, LPH 4, LPH5, HPH 2, HPH 1.

How to Cite this Article?

Garg, A. (2013). Performance Optimization Of Regenerative Feed Water System In Thermal Power Plant. i-manager’s Journal on Instrumentation and Control Engineering, 1(3), 1-7. https://doi.org/10.26634/jic.1.3.2350

References

[1]. AmirabedinEhsana, M.& ZekiYilmazoglub. (2011). “Design and Energy Analysis of a Thermal Power Plant Using Different Types of Turkish Lignite” International Journal of Thermodynamics (I Jot)Vol. 14 (No. 3), pp. 125-133.

[2]. Arjun Sharma., Shailendra Kumar Shukla., & Ajeet Kumar Rai. (2011). “Finite Time Thermodynamic Analysis and Optimization of Solar-dish Stirling Heat Engine With Regenerative Losses in Finite Time Thermodynamic Analysis and Optimization” Conference of THERMAL Science.

[3]. HasanHuseyinErdem., Ali VolkanAkkaya. (2009). “Comparative energetic and energetic performance analyses for coal-fired thermal power plants in Turkey” International Journal of Thermal Sciences Volume 48, Issue 11, November 2009, Pages 2179–2186.

[4]. Jan Szargut. (2005). “Influence of Regenerative Feed Water Heaters on the Operational Costs of Steam Power Plants and HP Plant”, Int. Journal of Thermodynamics Vol. 8 (No. 3), pp. 137-141, September.

[5]. Konrad. (2011). “Power Plant Performance Monitoring Using Statistical Methodology Approach” Journal of Power Technologies 91 (2) 63–76.

[6]. M. A. Habib & S. M. Zubai. (1990). Second-law-based “Thermodynamic Analysis Of Regenerative-reheat Rankine-cycle Power Plants” Energy, Vol. 17, No. 3. pp. 295-301.

[7]. M.A. Habib*., S.A.M. Said., & I. Al-Zaharna. (1999). “Thermodynamic analysis of reheat regenerative thermal-power plants” Applied Energy,63 (1999) 17-34.

[8]. Marc A. Rosen. (2000). “Energy- and energy-based comparison of coal-fired and nuclear steam power plants”, Energy An International Journal.

[9]. M.K. Gupta., S.C. Kaushik. (2010). “Energy analysis and investigation for various feed water heaters of direct steam generation solar–thermal power plant”, Renewable Energy Volume 35, Issue 6, June, Pages 1228–1235.

[10]. Mehmet SaitSöylemez. (2011). “On the Thermo Economical Optimization of Feed Water Heaters in Thermal Power Plants,” Smart Grid and Renewable Energy.

[11]. RafalLaskowskia. (2011). “Comparison of two simple mathematical models for feed water heaters,” Journal of Power Technologies, 91 (1) 14–22.

[12]. S.K. Tyagi., Shengwai Wang., & S.R. Park. (2008). “Performance Criteria on Different pressure ratio of an irreversible modified complex brayton cycle”, Indian Journal of Pure and Applied Physics, Vol 46, August, pp 565-574.

[13]. Wesley Williams (2002). Regenerative Heater Optimization for Steam Turbo-Generation Cycles of Generation IV Nuclear Power Plants, NESLS Student Intern Oak Ridge National Laboratory.

[14]. William L., Viar., PE waterland., Viar & Associates, Inc. (2004). Wilmington, delaware, regenerative boiler feedwater heater economics, Proceedings from the Eighth Annual Industrial Energy Technology Conference, Houston, TX, June 17-19.

[15]. Yuan-Yuan Jiang., & Shao-Xiang Zhou. (2010).”Study on Evaluation Method for Regenerative Feed Heating System of Power Plant in 2010,” International Conference on Advances in Energy Engineering.

[16]. Y. Haseli (2011). “The Netherlands (October 2011) “Optimum Performance of a Regenerative Gas Turbine Power Plant Operating With/Without a Solid Oxide Fuel Cell” Journal of Fuel Cell Science and Technology, Volume 8.

Performance Optimization Of Regenerative Feed Water System In Thermal Power Plant

Abstract

Keywords

How to Cite this Article?

References

If you have access to this article please login to view the article or kindly login to purchase the article

Purchase Instant Access

Options for accessing this content:

	North Americas,UK, Middle East,Europe		India	Rest of world
	USD	EUR	INR	USD-ROW
Online	200	35	35	200	15
Pdf	35	35	200	20
Pdf & Online	35	35	400	25