References
[1]. B.K. Bose, (1996). “
frequency drives”, IEEE Press, New York, 1996.
[2]. Mamdani E. H. (1974). “Applications of Fuzzy
Algorithms for Simple Dynamic Plants”, Proc. of the IEE
121, pp. 1585 – 1588, 1974.
[3]. Takahashi I, Naguchi T. (1986). “A new quick-response
and high efficiency control strategy of an induction
motor”, Proc. Of the IEEE Transactions on Industry
Application [ISSN0093-9994], Vol. 22, No. 5, pp. 820-827,
1986.
[4]. Takahashi and Y. Ohmori, (1989). "High-Performance
Direct Torque Control of an Induction Motor", IEEE Trans.
On Industry Applications, Vol. 25, No. 2, Mar./Apr. 1989,
pp.257-264
[5]. P. Tiitinen, P. Pohkalainen, and J. Lalu, (1995). “The
Power electronics and variable
next generation motor control method: Direct Torque
Control (DTC)”, EPE Journal, Vol.5, No.1, March 1995, pp.
14-1 8.
[6]. D. Casadei, F. Profumo, G. Serra, A. Tani. ( “FOC
and DTC: Two variable schemes for induction motors
torque control”, Proc. of the IEEE Trans. Power Electronics,
Vol.17, No. 5, 2002.
[7]. J. Kang, S. Sul, (1999). New direct torque control of
induction motor for minimum torque ripple and constant
switching frequency, IEEE Trans. Ind. Applicat., vol. 35,
Sept./Oct. 1999, pp. 1076–1082.
[8]. P. R.Toufouti, S.meziane, H. Benalla, (2006). ”Direct
Torque Control of Induction motor using fuzzy logic”, ACSE
journal volume(6), Issue(2) June 2006.
[9]. D. Casadei, G. Grandi, G. Serra, A. Tani. (1994).
“Effectes of flux and torque hysteresis band amplitude in
direct torque control of induction machines”, Proc. IEEEIECON-
94,pp. 299 – 304, 1994.
[10]. Heber, B. Xu, L.Tang, Y. (1995). “Fuzzy Logic
Enhanced Speed Control of an Indirect Field Oriented
Induction Machine Drive”, Proc. of the IEEE PESC Meet.
pp. 1288 – 1294, 1995.
[11]. R. Toufouti S. Meziane, H. Benalla, (2006). “Direct
Torque Control for Induction Motor Using Fuzzy Logic”
ICGST Trans. on ACSE, Vol.6, Issue 2, pp. 17-24, June, 2006.
[12]. Ji-Su Ryu, In-Sic Yoon, Kee-Sang Lee and Soon-Chan
Hong, (2001). “Direct Torque Control of Induction Motors
Using Fuzzy Variable switching Sector ”, Industrial
Electronics, 2001. Proceedings. ISIE 2001. IEEE
International Symposium on Volume 2, Issue , 2001
Page(s):901 - 906 vol.2
[13]. Thomas G. Habetla. Deepakraj M. Divan (1991).
“Control strategies for Direct Torque Control using Discrete
pulse modulation”, IEEE Transactions on Industrial drives
and Applications, Vol. 27, No. 5, Sept/Oct 1991
[14]. D. Casadei, G.Serra, A. Tani, and L. Zarri, (2006).
“Assessment of direct torque control for induction motor
drives” , Bulletin of the Polish Academy of Technical
Sciences, Vol. 54, No. 3, 2006.
[15]. Hui-Hui Xia0, Shan Li, Pei-Lin Wan, Ming-Fu Zhao,
2002).( "Study on Fuzzy Direct Torque Control System"
Proceedings of the Fourth International Conference on
Machine Learning and Cybernetics, Beijing, 4-5 August
2002.
16]. G. Escobar, A.M. Stankovic, E. Galvan, J.M.
Carrasco, and R.A. Ortega, (2003). “A family of switching
control strategies for the reduction of torque ripple in DTC”,
IEEE Trans. on Control Systems Technology 11 (6), 933–939
(2003).
[17]. TANG, (2001). L. et al: “A New Direct Torque Control
Strategy for Flux and Torque Ripple Reduction for Induction
Motors Drive by Space Vector Modulation”, Conf. Rec.
IEEE-PESC'2001, Vol. 2, pp. 1440–1445, 2001.
[18]. Sudheer H, Kodad SF, Sarvesh B, (2011). “Improved
direct torque control of Induction motor suing Fuzzy Logic
based Duty ratio controller”, International Journal of
Advances in Engineering and Technology, Nov 2011.
[19]. Milan Zalman - Ivica Kuric (2005). “Direct Torque and
flux control of Induction machine and fuzzy controller”.
Journal of Electrical engineering Vol. 56, No. 9-10, 2005,
278–280.
[20]. Shahbazi, M. Moghani, J.S Mirtalaei, S.M.M, (2007).
“An improved direct torque control scheme for a matrix
converter-fed induction motor”, Universities of power
Engineering conference AUPEC 2007, Australia.
[21]. Dal.Y.Ohm, “Dynamic model of Induction motors for
vector control” Drivetech, Inc., Blacksburg, Virginia
[22]. Cascone V, (1989). “Three Level Inverter DSC control
strategy for traction drives. Proc. Of 5th European
Conference on Power Electronics and Applications”, pp.
135-139, 1989.
[23]. Fatiha Zidani, Rachid Nait, (2005). “Direct Torque
Control of Induction Motor with Fuzzy Minimization Torque
Ripple. Journal of Electrical Engineering. 56(7-8): 183-188
2005.
[24]. Kang J. K., Sul. S. K, ( “Torque Ripple
Minimization Strategy for Direct Torque Control of
Induction Motor”. IEEE-IAS annual meeting. pp. 438-443,
1998.
[25]. Lascu C., Boldea. I, Blaabjerg., (1998). “A Modified
Direct Torque Control (DTC) for Induction Motor Sensorless
Drive” IEEE-IAS Annual Meeting. pp. 415-422, 1998.
[26]. Pengcheng Zhu, Yong Kang and Jian Chen. (2003).
“Improve Direct Torque Control Performance of Induction
Motor with Duty Ratio Modulation” in Conf. Rec. IEEEIEMDC'
03. 1: 994-998, 2003.
[27]. Sayeed Mir and Malik E. Elbuluk, (1995). “Precision
Torque Control in Inverter-Fed Induction Machines using
Fuzzy Logic” IEEE-IAS annual meeting. pp. 396-401, 1995.
[28]. Malik E. Elbuluk, (2003). “Torque Ripple Minimization
in Direct Torque Control of Induction Machines,” IEEE-IAS
annual meeting, Vol. 1, pp. 12-16, October 2003.
[29]. T. Brahmananda Reddy, J. Amarnath and D. Subba
Rayudu (2006). “Direct Torque Control of Induction Motor
Based on Hybrid PWM Method for Reduced Ripple :A
Sliding Mode Control Approach” ACSE Journal, Volume
(6), Issue (4), December 2006.
[30]. Sudheer H, Kodad SF, Sarvesh B, (2011). “Torque
ripple reduction in Direct Torque control of induction
motor using Fuzzy Logic based Duty ratio controller”,
International Journal of Electronic engineering Research,
ISSN 0975 - 6450 Volume 3 Number 1 (2011) pp. 1–12.
