References
[1]. R. C. Reed (2006). “The superalloys fundamentals and applications”. Cambridge University Press;
[2]. S. M., Afazov, A., A. Becker, T.H., Hyde (2011). “FE prediction of residual stresses of investment casting in a Bottom Core Vane under equiaxed cooling” Journal of Manufacturing Processes 13. 30–40.
[3]. S. U. Behm, K. L. Gunter, J. W. Sutherland (2003). “An Investigation into the Effect of Process Parameter Settings on Air Emission Characteristics in the Lost Foam Casting Process” Transactions of the American Foundryman Society ,1-10
[4]. Yu Yong Chen, Yan Fei Chen, Shu Long Xiao, Jing Tian, Li Juan Xu (2011). “Preparation of Ceramic Moulds with Zirconia Coatings for the Investment Casting of TiAl Alloys” Advanced Materials Research, 146-147, 499. doi: 10.4028/www.scientific.net/AMR.146 147.499.
[5]. Chun Ju Huang, Ming C Leu, L Von Richards (2007). “Investment casting with ice pattern and comparison with other type of Rapid Prototype pattern” Shape Casting: 2nd International Symposium, 267-274.
[6]. E. H. Niemann (1980). “Expandable polystyrene pattern material for the lost foam process”. American. Foundryman Soc. Trans. 88, 793–799.
[7]. S. Shivkumar (1993). “Casting characteristic of aluminum alloys in the EPC process”. American Foundryman Soc. Trans. 101, 519–524.
[8]. T.V. Moilbog, H. Littleton, (2001). “Experimental simulation of pattern degradation in lost foam”. American Foundryman Soc. Trans. 109, 1523–1555.
[9]. J. H. Barron. (1965). “Full mould process—the direct approach to metal casting”, American Foundryman Soc. Trans., 73, 129–132.
[10]. S. Kumar, P. Kumar, and H. S. Shan (2007). “Effect of evaporative pattern casting process parameters on the surface roughness of Al–7% Si alloy castings”. J. Mater. Process. Technol., 182, 615–623.
[11]. Zagorka Ac´imovic´ Pavlovic´, Ljubis?a Andric´, Vladan Milos?evic´ , Sonja Milic´evic´ (2011). “Refractory coating based on cordierite for application in new evaporate pattern casting process” Ceramics International 37, 99–104.
[12]. S. Kumar, P. Kumar, H.S. Shan, (2004). “Effect of filler material in zircon flour coating used in evaporative pattern casting process”, Indian Foundry J. 50, 34–40.
[13]. H. Ohnishi, K. Maeda, T. Nakamura, and T. Kawanami, (1990). "High Temperature Mechanical Properties of Mullite Ceramics"; In. Ceramic Transaction, Vol. 6, 605-12.
[14]. Dong Kyu Kim and Waltraud M. Kriven (2004). “Mullite (3AI203 2SiO2) Aluminum Phosphate (AIPO4), Oxide, Fibrous Monolithic Composites. J. Am. Ceram. Soc., 87, 151794-803.
[15]. Sudhir Kumar, Pradeep Kumar, H.S. Shan (2008) . “Characterization of the refractory coating material used in vacuum assisted evaporative pattern casting process”. Journal of Materials Processing Technology. PROTEC12213 1–8.
[16]. H. Tanaka, S. Sawai, K. Morimoto, K. Hisano (2001). “Measurement of spectral emissivity and thermal conductivity of zirconia by thermal radiation calorimeter”. Journal of Thermal Analysis and Calorimetry; 64, 867–72.
[17]. G.W. Parmelee, H. Thurnauer, (1935). “Some effects of additions to a talk body”, Bull. Am. Ceram. Soc. 14, 69.
[18]. Lj. Trumbulovic, Z. Acimovic, Z. Gulisija, Lj. Andric, (2004). “Correlation of technological parameters and quality of castings obtained by the EPC method”, Mater. Lett. 58, 1726–1731
[19]. T.V. Molibog and H. Littleton (2001). “Proceedings of Lost Foam Casting”, AFS, Dallas, Texas, 2001, 71
[20]. Lee Heeseok, Kwak, Wikil and Han Ingoo (1995). “Developing a business performance evaluation system: an analytic hierarchical model”, The Engineering Economist, Vol.40, No.4, 343 357.
[21]. T. L. Saaty. (1994). “Fundamentals of Decision Making and Priority Theory with the Analytic Hierarchy Process”, RWS Publications, Pittsburgh, PA.
[22]. Saaty, T.L. (1980). “The Analytic Hierarchy Process”, McGraw Hill, New York, NY.
