[1]. Alashhab, Z. R., Anbar, M., Singh, M. M., Leau, Y. B., Al- Sai, Z. A., & Alhayja'a, S. A. (2021). Impact of coronavirus pandemic crisis on technologies and cloud computing applications. Journal of Electronic Science and Technology, 19(1), 100059.

[2]. AlJahdali, H., Albatli, A., Garraghan, P., Townend, P., Lau, L., & Xu, J. (2014, April). Multi-tenancy in cloud computing. In 2014 IEEE 8th International Symposium on Service Oriented System Engineering (pp. 344-351). IEEE.

[3]. Amini, M. (2014). The Factors that Influence on Adoption of Cloud Computing for Small and Medium Enterprises (Master Thesis, Universiti Teknologi Malaysia, Faculty of Computing).

[4]. Balasubramanian, R., & Aramudhan, M. (2012). Security issues: Public vs private vs hybrid cloud computing. International Journal of Computer Applications, 55(13), 35-41.

[5]. Bansal, S., & Kumar, D. (2020). IoT ecosystem: A survey on devices, gateways, operating systems, middleware and communication. International Journal of Wireless Information Networks, 27(3), 340-364.

[6]. Battleson, D. A., West, B. C., Kim, J., Ramesh, B., & Robinson, P. S. (2016). Achieving dynamic capabilities with cloud computing: An empirical investigation. European Journal of Information Systems, 25(3), 209-230.

[7]. Bhardwaj, A., & Krishna, C. R. (2021). Virtualization in cloud computing: Moving from hypervisor to containerization-a survey. Arabian Journal for Science and Engineering, 46(9), 8585-8601.

[8]. Bijon, K., Krishnan, R., & Sandhu, R. (2015, June). Mitigating multi-tenancy risks in IaaS cloud through constraints-driven virtual resource scheduling. In Proceedings of the 20th ACM Symposium on Access Control Models and Technologies (pp. 63-74).

[9]. Botta, A., De Donato, W., Persico, V., & Pescapé, A. (2016). Integration of cloud computing and internet of things: A survey. Future Generation Computer Systems, 56, 684-700.

[10]. Calheiros, R. N., Ranjan, R., Beloglazov, A., De Rose, C. A., & Buyya, R. (2011). CloudSim: A toolkit for modeling and simulation of cloud computing environments and evaluation of resource provisioning algorithms. Software: Practice and Experience, 41(1), 23-50.

[11]. Chiueh, S. N. T. C., & Brook, S. (2005). A survey on virtualization technologies. Rpe Report, 142.

[12]. Dove, R. (2002). Response Ability: The Language, Structure, and Culture of the Agile Enterprise. John Wiley & Sons.

[13]. Erl, T. (1900). Service-Oriented Architecture. Pearson Education Incorporated, Upper Saddle River.

[14]. Foster, I., Zhao, Y., Raicu, I., & Lu, S. (2008, November). Cloud computing and grid computing 360- degree compared. In 2008 Grid Computing Environments Workshop (pp. 1-10). IEEE.

[15]. Frischmann, B. M. (2012). Infrastructure: The Social Value of Shared Resources. Oxford University Press.

[16]. García-Valls, M., Cucinotta, T., & Lu, C. (2014). Challenges in real-time virtualization and predictable cloud computing. Journal of Systems Architecture, 60(9), 726-740.

[17]. Gong, C., Liu, J., Zhang, Q., Chen, H., & Gong, Z. (2010, September). The characteristics of cloud computing. In 2010 39th International Conference on Parallel Processing Workshops (pp. 275-279). IEEE.

[18]. Goyal, S. (2014). Public vs private vs hybrid vs community-cloud computing: A critical review. International Journal of Computer Network and Information Security, 6(3), 20-29.

[19]. Gupta, R. (2012). Above the clouds: A view of cloud computing. Asian Journal of Research in Social Sciences and Humanities, 2(6), 84-110.

[20]. Hilley, D. (2009). Cloud computing: A taxonomy of platform and infrastructure-level offerings. Georgia Institute of Technology (pp. 44-45).

[21]. Hofmann, P., & Woods, D. (2010). Cloud computing: The limits of public clouds for business applications. IEEE Internet Computing, 14(6), 90-93.

[22]. Hofmann, P., & Woods, D. (2010). Cloud computing: The limits of public clouds for business applications. IEEE Internet Computing, 14(6), 90-93.

[23]. Hosseinzadeh, S., Laurén, S., & Leppänen, V. (2016, December). Security in container-based virtualization through vTPM. In Proceedings of the 9th International Conference on Utility and Cloud Computing (pp. 214- 219).

[24]. Humble, J., & Farley, D. (2010). Continuous Delivery: Reliable Software Releases through Build, Test, and Deployment Automation. Pearson Education.

[25]. Hurwitz, J. S., & Kirsch, D. (2020). Cloud Computing for Dummies. John Wiley & Sons.

[26]. Jin, H., Ibrahim, S., Bell, T., Gao, W., Huang, D., & Wu,S. (2010). Cloud types and services. Handbook of Cloud Computing (pp. 335-355).

[27]. Kaur, R., & Kaur, A. (2014). A review paper on evolution of cloud computing, its approaches and comparison with grid computing. International Journal of Computer Science and Information Technologies, 5(5), 6060-6063.

[28]. King, S. T., Dunlap, G. W., & Chen, P. M. (2003, June). Operating system support for virtual machines. In USENIX Annual Technical Conference, General Track (pp. 71-84).

[29]. Kolchin, I., Nikolaev, M., Parfenov, S., Popkov, O., & Sobolev, S. (2013, October). Hardware-specific bare- metal microhypervisor prototype. In 2013 42nd International Conference on Parallel Processing (pp. 1038-1043). IEEE.

[30]. Kumar, K., Kumar, S., & Gill, H. S. (2023b). Role of surface modification techniques to prevent failure of components subjected to the fireside of boilers. Journal of Failure Analysis and Prevention, 23(1), 1-15.

[31]. Kumar, R., Kumar, M., & Chohan, J. S. (2021a). The role of additive manufacturing for biomedical applications: A critical review. Journal of Manufacturing Processes, 64, 828-850.

[32]. Kumar, R., Kumar, M., & Chohan, J. S. (2021b). Material-specific properties and applications of additive manufacturing techniques: A comprehensive review. Bulletin of Materials Science, 44(3), 181.

[33]. Kumar, R., Kumar, M., & Chohan, J. S. (2024). Investigation of tensile and flexural property of 316L stainless steel-coated polylactic acid parts. Journal of Materials Engineering and Performance, 33(6), 3087- 3100.

[34]. Kumar, R., Kumar, M., Chohan, J. S., & Kumar, S. (2022). Effect of process parameters on surface roughness of 316L stainless steel coated 3D printed PLA parts. Materials Today: Proceedings, 68, 734-741.

[35]. Kumar, R., Kumar, M., Chohan, J. S., Singh, N. K., & Mahajan, D. K. (2023a). Corrosion and thermal analysis of 316L stainless steel coated PLA parts fabricated by FDM process for biomedical applications. Protection of Metals and Physical Chemistry of Surfaces, 59(4), 736-749.

[36]. Kumar, S., & Kumar, R. (2021). Influence of processing conditions on the properties of thermal sprayed coating: A review. Surface Engineering, 37(11), 1339-1372.

[37]. Kumar, S., & Kumar, R. (2023). Overview of 3D and 4D printing techniques and their emerging applications in medical sectors. Current Materials Science: Formerly: Recent Patents on Materials Science, 16(2), 143-170.

[38]. Kumar, S., Handa, A., Chawla, V., Grover, N. K., & Kumar, R. (2021c). Performance of thermal-sprayed coatings to combat hot corrosion of coal-fired boiler tube and effect of process parameters and post-coating heat treatment on coating performance: A review. Surface Engineering, 37(7), 833-860.

[39]. Kumar, S., Handa, A., Chawla, V., Grover, N. K., & Kumar, R. (2021). Performance of thermal-sprayed coatings to combat hot corrosion of coal-fired boiler tube and effect of process parameters and post-coating heat treatment on coating performance: A review. Surface Engineering, 37(7), 833-860.

[40]. Kumar, S., Kumar, M., & Handa, A. (2019). High temperature oxidation and erosion-corrosion behaviour of wire arc sprayed Ni-Cr coating on boiler steel. Materials Research Express, 6(12), 125533.

[41]. Kumar, S., Kumar, M., & Handa, A. (2019a). Comparative study of high temperature oxidation behavior and mechanical properties of wire arc sprayed NiCr and NiAl coatings. Engineering Failure Analysis, 106, 104173-104189.

[42]. Kumar, S., Kumar, M., & Handa, A. (2020b). Erosion corrosion behaviour and mechanical properties of wire arc sprayed Ni-Cr and Ni-Al coating on boiler steels in a real boiler environment. Materials at High Temperatures, 37(6), 370-384.

[43]. Kumar, S., Kumar, R., Singh, S., Singh, H., & Handa, A. (2020a). The role of thermal spray coating to combat hot corrosion of boiler tubes: A study. Journal of Xidian University, 14(5), 229-239.

[44]. Li, Z., Kihl, M., Lu, Q., & Andersson, J. A. (2017, March). Performance overhead comparison between hypervisor and container based virtualization. In 2017 IEEE 31st International Conference on Advanced Information Networking and Applications (AINA) (pp. 955-962). IEEE.

[45]. Manvi, S. S., & Shyam, G. K. (2014). Resource management for Infrastructure as a Service (IaaS) in cloud computing: A survey. Journal of Network and Computer Applications, 41, 424-440.

[46]. Mattess, M., Vecchiola, C., Garg, S. K., & Buyya, R. (2011). Cloud bursting: Managing peak loads by leasing public cloud services. Cloud Computing: Methodology, Systems, and Applications, 343-367.

[47]. Mehrtak, M., SeyedAlinaghi, S., MohsseniPour, M., Noori, T., Karimi, A., Shamsabadi, A., ... & Dadras, O. (2021). Security challenges and solutions using healthcare cloud computing. Journal of Medicine and Life, 14(4), 448-461.

[48]. Mezni, H., & Sellami, M. (2017). Multi-cloud service composition using formal concept analysis. Journal of Systems and Software, 134, 138-152.

[49]. Millard, C. J. (Ed.). (2013). Cloud Computing Law (Vol. 2). Oxford University Press, Oxford.

[50]. Mudigonda, J., Yalagandula, P., Mogul, J., Stiekes, B., & Pouffary, Y. (2011). NetLord: a scalable multi-tenant network architecture for virtualized datacenters. ACM SIGCOMM Computer Communication Review, 41(4), 62- 73.

[51]. Ouda, G. K. (2020). Cloud computing service providers: A comparative study. Samarra Journal of Pure and Applied Science, 2(1), 76-89.

[52]. Pearce, M., Zeadally, S., & Hunt, R. (2013). Virtualization: Issues, security threats, and solutions. ACM Computing Surveys (CSUR), 45(2), 1-39.

[53]. Pietri, I., & Sakellariou, R. (2016). Mapping virtual machines onto physical machines in cloud computing: A survey. ACM Computing Surveys (CSUR), 49(3), 1-30.

[54]. Pousa, D., & Rufino, J. (2017). Evaluation of type-1 hypervisors on desktop-class virtualization hosts. IADIS- Journal on Computer Science and Information Systems, 12(2), 86-101.

[55]. Raj, P., Raman, A., Raj, P., & Raman, A. (2018). Multi- cloud management: Technologies, tools, and techniques. Software- Defined Cloud Centers: Operational and Management Technologies and Tools (pp. 219-240).

[56]. Rani, D., & Ranjan, R. K. (2014). A comparative study of SaaS, PaaS and IaaS in cloud computing. International Journal of Advanced Research in Computer Science and Software Engineering, 4(6), 458-461.

[57]. Rimal, B. P., Jukan, A., Katsaros, D., & Goeleven, Y. (2011). Architectural requirements for cloud computing systems: An enterprise cloud approach. Journal of Grid Computing, 9, 3-26.

[58]. Sabahi, F. (2012). Secure virtualization for cloud environment using hypervisor-based technology. International Journal of Machine Learning and Computing, 2(1), 39-45.

[59]. Sareen, P. (2013). Cloud computing: types, architecture, applications, concerns, virtualization and role of it governance in cloud. International Journal of Advanced Research in Computer Science and Software Engineering, 3(3), 533- 538.

[60]. Scherr, A. L. (1965). An Analysis of Time-Shared Computer Systems (Vol. 535). Massachusetts Institute of Technology.

[61]. Sekar, V., & Maniatis, P. (2011, October). Verifiable resource accounting for cloud computing services. In Proceedings of the 3rd ACM Workshop on Cloud Computing Security Workshop (pp. 21-26).

[62]. Sharma, P., Chaufournier, L., Shenoy, P., & Tay, Y. C. (2016, November). Containers and virtual machines at scale: A comparative study. In Proceedings of the 17th International Middleware Conference (pp. 1-13).

[63]. Shukur, H., Zeebaree, S., Zebari, R., Zeebaree, D., Ahmed, O., & Salih, A. (2020). Cloud computing virtualization of resources allocation for distributed systems. Journal of Applied Science and Technology Trends, 1(2), 98-105.

[64]. Smith, J. E., & Nair, R. (2005). The architecture of virtual machines. Computer, 38(5), 32-38.

[65]. Soni, M. (2014). Cloud computing basics-platform as a service (PaaS). Linux Journal, 2014(238), 4.

[66]. Sotomayor, B., Montero, R. S., Llorente, I. M., & Foster, I. (2009). Virtual infrastructure management in private and hybrid clouds. IEEE Internet Computing, 13(5), 14-22.

[67]. Srivastava, P., & Khan, R. (2018). A review paper on cloud computing. International Journal of Advanced Research in Computer Science and Software Engineering, 8(6), 17-20.

[68]. Sun, Y., Petracca, G., Ge, X., & Jaeger, T. (2016, December). Pileus: Protecting user resources from vulnerable cloud services. In Proceedings of the 32nd Annual Conference on Computer Security Applications (pp. 52-64).

[69]. Surianarayanan, C., & Chelliah, P. R. (2019). Essentials of Cloud Computing. Springer International Publishing, Cham.

[70]. Thomke, S. H. (2003). Experimentation Matters: Unlocking the Potential of New Technologies for Innovation. Harvard Business Press.

[71]. Vinothina, V. V., Sridaran, R., & Ganapathi, P. (2012). A survey on resource allocation strategies in cloud computing. International Journal of Advanced Computer Science and Applications, 3(6), 97-104.

[72]. Vojnak, D. T., Ðorđević, B. S., Timčenko, V. V., & Štrbac, S. M. (2019, November). Performance Comparison of the type-2 hypervisor VirtualBox and VMWare Workstation. In 2019 27th Telecommunications Forum (TELFOR) (pp. 1-4). IEEE.

[73]. Weill, P., & Vitale, M. (2002). What IT infrastructure capabilities are needed to implement e-business models? MIS Quarterly, 1(1), 17.

[74]. Welander, P. (2011). An iPhone as your next HMI: Consumer-grade smartphones and tablet computers are fast becoming commonplace extensions of industrial networks, permitting process monitoring and, even (gasp!) process control. Control Engineering, 58(8), 28- 32.

[75]. Wood, T., Cecchet, E., Ramakrishnan, K. K., Shenoy, P., Van der Merwe, J., & Venkataramani, A. (2010). Disaster recovery as a cloud service: Economic benefits & deployment challenges. In 2nd USENIX Workshop on Hot Topics in Cloud Computing (HotCloud 10), (pp. 1-7).

[76]. Yadava, S. C. (2009). Introduction to Client Sever Computing. New Age International.

[77]. Yenugula, M., Sahoo, S., & Goswami, S. (2023). Cloud computing in supply chain management: Exploring the relationship. Management Science Letters, 13(3), 193-210.

[78]. Youssef, A. E. (2012). Exploring cloud computing services and applications. Journal of Emerging Trends in Computing and Information Sciences, 3(6), 838-847.

[79]. Zhao, W., Wang, Z., & Luo, Y. (2009). Dynamic memory balancing for virtual machines. ACM SIGOPS Operating Systems Review, 43(3), 37-47.

[80]. Zhou, M., Zhang, R., Xie, W., Qian, W., & Zhou, A. (2010, November). Security and privacy in cloud computing: A survey. In 2010 Sixth International Conference on Semantics, Knowledge and Grids (pp. 105-112). IEEE.