This paper describes the first part of a new three-part study of STEM and engineering design research — termed Design-Without-Make- to be conducted by NC State University in 2009-10 in an NC high school. The hybrid quantitative, qualitative case study is being developed with the purpose of capturing what new technological learning occurs and how the new pedagogical learning benefits the technological learner. In support of this new design research a three-pronged framework is described, that of basic literature review, social learning theory and project-based learning study. This first paper also includes a description of proposed data collection, analysis, and limitations of the study, and concludes by presenting the implications for Design-Without-Make. Two further papers in the sequence will go on to explain the pilot study and the final study including data results and findings for this new approach to teaching engineering design technology within STEM education.

">

Design Without Make – A New Design Pedagogy For Stem Education

Brandon Thompson*, Terri Varnado**, Brian Matthews***
*-*** North Carolina State University.
Periodicity:April - June'2009
DOI : https://doi.org/10.26634/jet.6.1.207

Abstract

This paper describes the first part of a new three-part study of STEM and engineering design research — termed Design-Without-Make- to be conducted by NC State University in 2009-10 in an NC high school. The hybrid quantitative, qualitative case study is being developed with the purpose of capturing what new technological learning occurs and how the new pedagogical learning benefits the technological learner. In support of this new design research a three-pronged framework is described, that of basic literature review, social learning theory and project-based learning study. This first paper also includes a description of proposed data collection, analysis, and limitations of the study, and concludes by presenting the implications for Design-Without-Make. Two further papers in the sequence will go on to explain the pilot study and the final study including data results and findings for this new approach to teaching engineering design technology within STEM education.

Keywords

Project-based learning, Design-with-make, Design-without-make, STEM Education.

How to Cite this Article?

Brandon Thompson, Terri Varnado and, Brian Matthews (2009). Design Without Make – A New Design Pedagogy For Stem Education. i-manager’s Journal of Educational Technology, 6(1), 20-27. https://doi.org/10.26634/jet.6.1.207

References

[1].ASEE. (2008). PLTW Certified High School South Carolina District's First To Offer College Engineering Credits. First Bell.
[3]. Atkinson, S. (2000). Does the Need for High Levels of Performance Curtail the Development of Creativity in Design and Technology Project Work? International Journal of Technology and Design Education, 10, 255-281.
[4]. Badran, I. (2007). Enhancing creativity and innovation in engineering education. European Journal of Engineering Education, 32(5), 573-585.
[5].Banks, F. & Jackson, G. O. (2007). The role of making in design & technology. In Barlex, D. (Ed.), Design & technology for the next generation (pp. 186-197). Shropshire, England: Cliffe & Company Ltd.
[6].Barlex, D. (2007). Creativity in school design & technology in England: a discussion of influences. International Journal of Technology and Design Education, 17, 149-162.
[7].Barlex, D. M. & Trebell, D. (2008). Design-without-make: Challenging the conventional approach to teaching and learning in a design and technology classroom. The International Journal of Technology and Design Education, 18, 119-138
[8]. Berg, R., Pezalla-Granlund, M., Resnick, M., & Rusk, N. (2008). New pathways into robotics: Strategies for broadening participation. Journal of Science Education and Technology, 17, 59-69.
[9]. Davydov, V. V. & Kerr, S. T. (1995). The influence of L. S. Vygotsky on education theory, research, and practice. Educational Researcher, 24(3), 12-21.
[10]. Gredler, M.E. (2005). Learning and instruction: Theory into practice. Upper Saddle River, NJ: Pearson, Merrill, Prentice Hall.
[11]. International Technology Education Association (ITEA). (2000). Standards for technological literacy.Reston, VA: ITEA.
[12]. John-Steiner, V. (2000) Creative Collaboration. Oxford, Oxford University Press
[13]. Kipperman, D. & Sanders, M. (2007). Mind (not) the gap…Take a risk. In Barlex, D. (Ed.), Design & technology for the next generation (pp. 186-197). Shropshire, England: Cliffe & Company Ltd.
[14]. Matthews, B, (2004). The Effects of Direct and Problem-based Learning Instruction in an Undergraduate Introductory Engineering Graphics Course. Unpublished Doctoral dissertation
[15]. Mills, J.E. & Treagust, D.F. (2003). Engineering education-Is problem-based or project-based learning the answer? Australian Journal of Engineering Education.
[16].Murphy, P. and Hennessy, S. (2001). Realising the potential and lost opportunities for peer collaboration in a D and T setting. The International Journal of Technology and Design Education, 11, 203-237
[18]. Peterson, R. E. (2001). Establishing the creative environment in Technology Education. The Technology Teacher, 61, 7-9.
[19]. Schwartz, J. (2007, September 30). Re-engineering engineering. The New York Times, pp.6, 94.
[20]. Spendlove, D. (2007). The locating of emotion within a creative, learning and product oriented design and technology experience: Person, process, product. The International Journal of Technology and Design Education, 18, 45-57.
[21]. Sternberg, R. J., Reznitskaya, A., & Jarvin, L. (2007). Teaching for wisdom: What matters is not just what students know, but how they use it. London Review of Education, 5(2), 143-158.
[22]. Trebell, D. (2007, July). A literature review in search of an appropriate theoretical perspective to frame a study of designerly activity in secondary design and technology. Paper presented at the meeting of The Design and Technology Association Education & International Research Conference, Telford, England.
If you have access to this article please login to view the article or kindly login to purchase the article

Purchase Instant Access

Single Article

North Americas,UK,
Middle East,Europe
India Rest of world
USD EUR INR USD-ROW
Pdf 35 35 200 20
Online 35 35 200 15
Pdf & Online 35 35 400 25

Options for accessing this content:
  • If you would like institutional access to this content, please recommend the title to your librarian.
    Library Recommendation Form
  • If you already have i-manager's user account: Login above and proceed to purchase the article.
  • New Users: Please register, then proceed to purchase the article.