i-manager Publications

Multi-Position and Orientation Analysis of Spatial Parallel Manipulator using DE Algorithm

Meghavathu Roopa*, N. Mohan Rao**

*-** Department of Mechanical Engineering, Jawaharlal Nehru Technological University, Kakinada, India.

Periodicity:January - March'2024
DOI : https://doi.org/10.26634/jfet.19.2.20292

Abstract

Differential Evolution (DE) is an informative and direct approach to optimization with limited control parameters. This paper presents a multi-position and orientation analysis of a Spatial Parallel Manipulator considering the influence of physical constraints, such as limb lengths and spherical joint motion. The synthesis process primarily involves determining the scopes of the permanent base and movable platform relative to the axes of the revolute joints, enabling the moving platform to traverse a predetermined range of positions. The dimensions of the moving platform and fixed base are determined by considering restrictions on joint motion to design the parallel manipulator using the DE algorithm method. The synthesis procedure is illustrated with a numerical example involving eight positions.

Keywords

3-PRS Parallel Manipulator; Physical Constraints, Synthesis, DE Algorithm.

How to Cite this Article?

Roopa, M., and Rao, N. M. (2024). Multi-Position and Orientation Analysis of Spatial Parallel Manipulator using DE Algorithm. i-manager’s Journal on Future Engineering & Technology, 19(2), 10-21. https://doi.org/10.26634/jfet.19.2.20292

References

[1]. Abbasnejad, G., Zarkandi, S., & Imani, M. (2010). Forward kinematics analysis of a 3-PRS parallel manipulator. World Academy of Science, Engineering and Technology, 37, 329-335.

[2]. Antonov, A., Fomin, A., Glazunov, V., Petelin, D., & Filippov, G. (2023). Type synthesis of 5-DOF hybrid (parallel-serial) manipulators designed from open kinematic chains. Robotics, 12(4), 98.

[3]. Babu, S. R., Raju, V. R., & Ramji, K. (2013). Design for optimal performance of 3-RPS parallel manipulator using evolutionary algorithms. Transactions of the Canadian Society for Mechanical Engineering, 37(2), 135-160.

[4]. Chen, Q., Chen, Z., Chai, X., & Li, Q. (2013). Kinematic analysis of a 3-axis parallel manipulator: The P3. Advances in Mechanical Engineering, 5, 589156.

[5]. Dhandapani, C., & Sivaramakrishnan, R. (2014). Modelling, simulation and synthesis of three degrees of freedom triglide parallel manipulator for positioning and orientation. International Journal of Mechanical and Mechatronics Engineering IJMME-IJENS, 14(2), 66-76.

[6]. Fan, Z., Guo, Y. J., & Zhi. L. B. (2008). Kinematic characteristics analysis of 3-PRS parallel manipulator. Journal of Donghua University, 25(1), 78-81.

[7]. Hernandez, A., Ibarreche, J. I., Petuya, V., & Altuzarra, O. (2014). Structural synthesis of 3-DoF spatial fully parallel manipulators. International Journal of Advanced Robotic Systems, 11(7), 101.

[8]. Huang, P., Wang, J., Wang, L., & Qian, J. (2012). Dimensional synthesis for 3-PRS mechanism based on identifiability performance. Chinese Journal of Mechanical Engineering, 25(2), 234-240.

[9]. Lee, K. M., & Shah, D. K. (1988). Dynamic analysis of a three- degrees- of- freedom in- parallel actuated manipulator. IEEE Journal on Robotics and Automation, 4(3), 361-367.

[10]. Li, Q., & Hervé, J. M. (2010). 1T2R parallel mechanisms without parasitic motion. IEEE Transactions on Robotics, 26(3), 401-410.

[11]. Li, Q., Chen, Z., Chen, Q., Wu, C., & Hu, X. (2011). Parasitic motion comparison of 3-PRS parallel mechanism with different limb arrangements. Robotics and Computer-Integrated Manufacturing, 27(2), 389-396.

[12]. Li, Y., & Xu, Q. (2006). Kinematic analysis and design of a new 3-DOF translational parallel manipulator. Journal Mechanical Design, 128(4), 729-737.

[13]. Liu, X. J., Wang, J., & Kim, J. (2006). Determination of the link lengths for a spatial 3-DOF parallel manipulator. Journal Mechanical Design, 128(2), 365-373.

[14]. Lu, S., & Li, Y. (2014, July). Dimensional synthesis of a 3-DOF translational parallel manipulator considering kinematic dexterity property. In 2014 IEEE International Conference on Information and Automation (ICIA) (pp. 7- 12). IEEE.

[15]. Mattila, J., Koivumäki, J., Caldwell, D. G., & Semini, C. (2017). A survey on control of hydraulic robotic manipulators with projection to future trends. iEeE/ASME Transactions on Mechatronics, 22(2), 669-680.

[16]. Nayak, A., Stigger, T., Husty, M. L., Wenger, P., & Caro, S. (2018). Operation mode analysis of 3-RPS parallel manipulators based on their design parameters. Computer Aided Geometric Design, 63, 122-134.

[17]. Nurahmi, L., Caro, S., & Wenger, P. (2015). Design of 3-RPS parallel manipulators based on operation modes. In The 14th IFToMM World Congress in Mechanism and Machine Science (pp. 1-10).

[18]. Patel, Y., & George, P. (2014). Constraint and inverse kinematic analysis of 3-RPS parallel manipulator. In 5th International & 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2014) (pp. 1-6).

[19]. Pundru, S. R., & Nalluri, M. R. (2018). Three degree of freedom spatial parallel manipulator inverse kinematic position analysis. International Journal Engineering & Technology (UAE), 7(45), 98-101.

[20]. Pundru, S. R., & Nalluri, M. R. (2021). Synthesis of 3-PRS manipulator based on revolute and cone angle of spherical constraints on range of rotational motion of spherical joints. Journal of the Institution of Engineers (India): Series C, 102, 209-219.

[21]. Qian, J., Li, Y., & Zhuge, L. (2020). An investigation on a Novel3-RCU flexible micromanipulator. Micromachines, 11(4), 423.

[22]. Rao, N, M. (2010). Synthesis of a spatial 3-RPS parallel manipulator based on physical constraints. Sadhana, 35(6), 739-746.

[23]. Rao, N. M. (2011). Synthesis of a spatial 3-RPS parallel manipulator based on physical constraints using hybrid GA simplex method. The International Journal of Advanced Manufacturing Technology, 52, 777-787.

[24]. Rao, N. M., & Rao, K. M. (2009). Dimensional synthesis of a spatial 3-RPS parallel manipulator for a prescribed range of motion of spherical joints. Mechanism and Machine Theory, 44(2), 477-486.

[25]. Rao, P. S. (2022). Calibrating a synthesized 3-PRS manipulator by minimizing the errors in positions of revolute joints. Journal of the Institution of Engineers (India): Series C, 103(5), 1083-1093.

[26]. Shi, Y., Gao, Y., & Guo, L. H. (2016). Kinematic analysis of a 3-DOF parallel machine tool with large workspace. In MATEC Web of Conferences, 44,02075. EDP Sciences.

[27]. Staicu, S. (2009). Dynamics of the 3-PRP planar parallel robot. The Romanian Journal of Technical Sciences: Applied Mechanics, 54(2), 125-142.

[28]. Sun, T., Song, Y., Li, Y., & Liu, L. (2010). Dimensional synthesis of a 3-DOF parallel manipulator based on dimensionally homogeneous Jacobian matrix. Science in China Series E: Technological Sciences, 53(1), 168- 174.

[29]. Tsai, M. S., Shiau, T. N., Tsai, Y. J., & Chang, T. H. (2003). Direct kinematic analysis of a 3-PRS parallel mechanism. Mechanism and Machine Theory, 38(1), 71- 83.

[30]. Urizar, M., Petuya, V., Diez, M., & Hernández, A. (2014). Dimensional Synthesis of a Spatial Orientation 3-DoF Parallel Manipulator by Characterizing the Configuration Space. In Computational Kinematics: Proceedings of the 6th International Workshop on Computational Kinematics (CK2013) (pp. 85-92). Springer Netherlands.

[31]. Yun, Y., Wnag, L., & Guan, L. (2004, October). Dimensional synthesis of a 3-DOF parallel manipulator. In 2004 IEEE International Conference on Systems, Man and Cybernetics (IEEE Cat. No. 04CH37583), 6, 5317-5323. IEEE.

[32]. Zarkandi, S., & Esmaili, M. R. (2011). Direct position kinematics of a three revolute-prismatic-spherical parallel manipulator. International Journal of Recent Research and Applied Studies, 7(1), 88-95.

[33]. Zhang, Y., & Ting, K. L. (2013). Design and analysis of a spatial 3-DOF parallel manipulator with 2T1R-type. International Journal of Advanced Robotic Systems, 10(5), 226.

Multi-Position and Orientation Analysis of Spatial Parallel Manipulator using DE Algorithm

Abstract

Keywords

How to Cite this Article?

References

If you have access to this article please login to view the article or kindly login to purchase the article

Purchase Instant Access

Options for accessing this content:

	North Americas,UK, Middle East,Europe		India	Rest of world
	USD	EUR	INR	USD-ROW
Pdf	35	35	200	20
Online	35	35	200	15
Pdf & Online	35	35	400	25