References
[1]. Abbaspour, H., Drebenstedt, C., Badroddin, M., &
Maghaminik, A. (2018). Optimized design of drilling and
blasting operations in open pit mines under technical and
economic uncertainties by system dynamic modelling.
International Journal of Mining Science and Technology,
28(6), 839-848. https://doi.org/10.1016/j.ijmst.2018.06.009
[2]. Adebayo, B., & Mutandwa, B. (2015). Correlation of
blast-hole deviation and area of block with fragment size
and fragmentation cost. International Research Journal
of Engineering and Technology (IRJET), 2(7), 402-406.
[3]. Afeni, T. B. (2009). Optimization of drilling and blasting
operations in an open pit mine-the SOMAIR experience.
Mining Science and Technology (China), 19(6), 736-739. https://doi.org/10.1016/S1674-5264(09)60134-4
[4]. Afum, B. O., & Temeng, V. A. (2015). Reducing drill and
blast cost through blast optimisation–A case study.
Ghana Mining Journal, 15(2), 50-57.
[5]. Archives of Mining Sciences. (n.d.). Retrieved from
http://mining.archives.pl
[6]. Bowa, V. M. (2015). Optimization of blasting design
parameters on open pit bench a case study of Nchanga
open pits. International Journal of Scientific & Technology
Research, 4(9), 45-51.
[7]. Dworzak, M., Nowak-Senderowska, D., & Pyra, J.
(2017). Comparison of hazards during blasting operations
in surface mining. Zeszyty Naukowe IGSMiE PAN, 101, 265-278.
[8]. Faramarzi, F., Farsangi, M. A. E., & Mansouri, H. (2014).
Simultaneous investigation of blast induced ground
vibration and airblast effects on safety level of structures
and human in surface blasting. International Journal of
Mining Science and Technology, 24(5), 663-669.
https://doi.org/10.1016/j.ijmst.2014.07.006
[9]. Onderka, Z. (2001a). Conditions for effective blasting.
In Proceedings Blasting Techniques in Mining
Conference, Jaszowiec, Poland (pp. 185-208).
[10]. Onderka, Z. (2001b). Seismic effects of blasting-
Comments and recommendations. In Proceedings
Blasting Techniques in Mining Conference, Jaszowiec,
Poland (pp. 435-454).
[11]. Pyra, J., & Papinski, B. (2016). Analysis of the
operating costs of blasting operations using electronic
explosive initiation system. Inzynieria Mineralna, 17(2), 53-63.
[12]. Rai, P., Schunnesson, H., Lindqvist, P. A., & Kumar, U.
(2016). Measurement-while-drilling technique and its
scope in design and prediction of rock blasting.
International Journal of Mining Science and Technology,
26(4), 711-719. https://doi.org/10.1016/j.ijmst.2016.05.025
[13]. Rajpot, M. A. (2009, March). The effect of
fragmentation specification on blasting cost. In Masters
Abstracts International, 49(2).
[14]. Rout, M., & Parida, C. K. (2007). Optimization of
Blasting Parameters in Opencast Mines (Doctoral
dissertation).
[15]. Tosun, A., & Konak, G. (2015). Determination of specific charge minimizing total unit cost of open pit
quarr y blasting operations. Arabian Journal of
Geosciences, 8(8), 6409-6423. https://doi.org/10.1007/s12517-014-1657-7
