References
[1]. Chen, L., Jinqing, Z., Wenzhong, L., Wensheng, Z., &
Qihong, F. (2020). A new dynamic calculation method of
volume sweep coefficient of water drive reservoir based
on approximate theoretical water drive curve. Editorial
Department of Petroleum Geology and Recovery
Efficiency, 27(5), 112-118.
[3]. Jian-guo, H. U. (2006). A new growth curve for
forecasting production of oil-gas field. Xinjiang Petroleum
Geology, 27(5), 569-571.
[5]. Li, K., Hu, S. Y., & Zhang, J. Q. (2019a). A new type
water flooding characteristic curve and its application.
Reservoir Evaluation and Development, 9(2), 13-16.
[6]. Li, L. F., Teng, S. T., & Feng, X. B. (2019b). A new waterflooding
characteristic curve based on the whole waterflooding
process. Special Oil & Gas Reservoirs, 26(3), 85-88.
[7]. Ling, H. H., Meng, Z. Q., & Shi, H. F. (2018).
Improvement of characterization method based on type
a water drive curve. Lithologic Reservoirs, 30(6), 125-130.
[9].
Liu, P., Mu, Z., Wang, W., Liu, P., Hao, M., & Liu, J. (2017).
A new combined solution model to predict water cut in
water flooding hydrocarbon reservoirs. International
Journal of Hydrogen Energy, 42(29), 18685-18690.[12]. Reddy, D. S., & Kumar, G. S. (2014). A Numerical
Investigation on the role of Oil Saturations on Performance
of In-Situ Combustion in Porous Media. International
Journal of Scientific Ƭ Engineering Research, 5(5), 531-538.
[13]. Tan, H. Q., Fu, Q., & Li, L. X. (2017). Application of
streamline numerical simulation method to study of
remaining oil distribution in high water-cut stage oilfield.
Journal of Chengdu University of Technology (Science &
Technology Edition), 44(1), 30-35.
[14]. Wang, B. L., Feng, Q., & Jiang, H. Y. (2019).
Application of water flooding characteristic curve in the
development of low-permeability oil reservoir. Special Oil
& Gas Reservoirs, 26(6), 82-87.
[15].
Wang, J., Shi, C., Ji, S., Li, G., & Chen, Y. (2017). New
water drive characteristic curves at ultra-high water cut
stage. Petroleum Exploration and Development, 44(6),
1010-1015.[16]. Wang, Y. S., Shi, C. F., & Wang, J. Q. (2020). New
equations for characterizing water flooding in ultra-high
water-cut oilfields. Oil Gas Geology, 41, 1282-1287.
[19]. Xu, Q., Chen, Y., Hou, Y., & Li, H. (2015). Research on
numerical simulation processing mode based on
reservoir time varying physical properties and seepage in
extra high water cut stage. Drilling and Production
Technology, 38(5), 41-43.
[20]. Youquan, H., Zhijun, Z., & Zhijun, L. (2014). Research
on precision improvement of numerical simulation in
extra high water cut stage, three block of P reservoir.
Editorial Department of Petroleum Geology and
Recovery Efficiency, 21(5), 65-68.
[21]. Yu, Q. T. (1995). Three increase curves for description
and prediction of oilfield development indexes. China
Offshore Oil and Gas (Geology), 9(2), 141-148.
[22]. Yu, Q. T. (2000). Classification and optimization of
increase curves. Fault-Block Oil&Cas Field, 7(1), 34-41.
[24]. Zhao, C. S., Yuan, Y. W., Xu, J. M., Liu, Q. J., & Xu, Q. S.
(2011). Numerical simulation of horizontal wells at late
high water cut stage. Tezhong Youqicang- Special Oil &
Gas Reservoirs, 18(2), 59-61.
[25].
Zhao, H., Kang, Z., Zhang, X., Sun, H., Cao, L., &
Reynolds, A. C. (2016). A physics-based data-driven
numerical model for reservoir history matching and
prediction with a field application. SPE Journal, 21(6),
2175-2194.[26]. Zhou, P., Chen, X. F., & Yue, P. (2012a). Establishment
of a new type of water drive characteristic curve.
Petroleum Geology and Recovery Efficiency, 19(4), 99-102.
[27]. Zhou, P., Chen, X. F., & Yue, P. (2012b). A combined solution model based on rayleigh model and water drive curves. Xinjiang Petroleum Geology, 33(2), 205-207.
