i-manager Publications

Modelling, Performance Assessment and Transient Analysis of Brushless DC Motor by Controller Techniques

Divyanshu Kumar*, Shivam**, Khadim Moin Siddiqui***, Kalpana Kureel****

*-**** Department of Electrical and Electronics Engineering, SRMCEM, Lucknow, India.

Periodicity:April - June'2022
DOI : https://doi.org/10.26634/jee.15.4.18688

Abstract

This paper investigates steady state and transients' performance of Brushless Direct Current Motor (BLDC) motor and collates the performance of Proportional Integral (PI) and Proportional Integral Derivative (PID) Controller. Speed and torque behavior is most valuable nowadays for home appliance and other applications. The torque in motor is produced with effect of magnetic field and current. Magnetic field is generated in motor by the strong permanent magnet, and motor current depends upon voltage control and Eb, which is done by field and speed motor. In order to obtain required torque and speed at a particular load, current required must be controlled. The transient or dynamic response analysis is done with transfer function of BLDC motor obtained by the Laplace transform of equivalent circuit equation. The trapezoidal type BLDC machine is controlled using 3-phase Inverter Bridge. The commutation sequence is done with hall sensor and gate pulses. The simulation work is done in MATLAB/ Simulink software and mathematical model is evaluated. The analysis is done to know the performance of how quickly the transient reduces and gives smooth operation for various applications.

Keywords

Brushless DC Motor, 3- Phase Inverter Bridge, PI Controller, PID Controller, Controlled Voltage Source, Hall Sensors.

How to Cite this Article?

Kumar, D., Shivam, Siddiqui, K. M., and Kureel, K. (2022). Modelling, Performance Assessment and Transient Analysis of Brushless DC Motor by Controller Techniques. i-manager’s Journal on Electrical Engineering, 15(4), 12-19. https://doi.org/10.26634/jee.15.4.18688

References

[1]. Ananthan, N., Vimalraj, N., & Kumar, G. (2015). Adesign and Analysis of Brushless D.C Motor for Reduce Cogging Torque. International Journal of Electrical and Electronic Engineering and Telecommunication, 1(1), 35-41.

[2]. Apatya, Y. A., Subiantoro, A., & Yusivar, F. (2017, July). Design and prototyping of 3-phase BLDC motor. In 2017, 15th International Conference on Quality in Research (QiR): International Symposium on Electrical and Computer Engineering (pp. 209-214). IEEE.

[3]. Chaudhari, P. S., Patil, S. L., Pandey, S. K., & Sinha, S. (2016, December). Performance analysis of BLDC motor on sinusoidal and square wave supply. In 2016, IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES) (pp. 1-6). IEEE. https://doi.org/10.1109/PEDES.2016.7914354

[4]. Ebadpour, M., Amiri, N., & Jatskevich, J. (2021). Fast fault-tolerant control for improved dynamic performance of Hall-sensor-controlled brushless DC motor drives. IEEE Transactions on Power Electronics, 36(12), 14051-14061. https://doi.org/10.1109/TPEL.2021.3084921

[5]. Kishore, N., & Singh, S. (2014, March). Torque ripples control and speed regulation of Permanent magnet Brushless dc Motor Drive using Artificial Neural Network. In 2014, Recent Advances in Engineering and Computational Sciences (RAECS) (pp. 1-6). IEEE. https://doi.org/10.1109/RAECS.2014.6799498

[6]. Macahig, N. A. (2020, March). A 6-wire 3-phase inverter topology for improved BLDC performance and harmonics. In 2020, IEEE Applied Power Electronics Conference and Exposition (APEC) (pp. 741-744). IEEE. https://doi.org/10.1109/APEC39645.2020.9124358

[7]. Minghui, Z., & Weiguo, L. (2010, August). Transient coupled electro-magnetic thermal analysis of a permanent magnet brushless DC motor. In 2010, International Conference on Computer, Mechatronics, Control and Electronic Engineering (Vol. 4, pp. 221-224). IEEE. https://doi.org/10.1109/CMCE.2010.5610162

[8]. Prakhyath Shetty, N. S. A., & Sathyendra, M. (2015). Closed Loop Control System Modeling of Pm BLDC. IEEE Sponsored 2nd International Conference on Electronics and Communication System.

[9]. Sakunthala, S., Kiranmayi, R., & Mandadi, P. N. (2017, August). A study on industrial motor drives: Comparison and applications of PMSM and BLDC motor drives. In 2017 International Conference on Energy, Communication, Data Analytics and Soft Computing (ICECDS) (pp. 537-540). IEEE.

[10]. Hazari, M. R., Jahan, E., Siraj, M. E., Khan, M. T. I., & Saleque, A. M. (2014, April). Design of a Brushless DC (BLDC) motor controller. In 2014, International Conference on Electrical Engineering and Information & Communication Technology (pp. 1-6). IEEE.

[11]. Thirunavukkarasu, S., & Nagarajan, C. (2018, March). Performance Analysis of BLDC Motor Drive for Feed Drives. In 2018, Conference on Emerging Devices and Smart Systems (ICEDSS) (pp. 67-70). IEEE. https://doi.org/10.1109/ICEDSS.2018.8544325

[12]. Watthage, S. C., Chen, C., & Perry, C. H. (2012, March). Analysis of single side axial flux brushless DC motor with different number of stator electromagnetic poles. In 2012, Proceedings of IEEE Southeastcon (pp. 1-6). IEEE. https://doi.org/10.1109/SECon.2012.6196986

If you have access to this article please login to view the article or kindly login to purchase the article

Single Article

	North Americas,UK, Middle East,Europe		India	Rest of world
	USD	EUR	INR	USD-ROW
Online	15	15

ADD TO CART

Options for accessing this content:

If you would like institutional access to this content, please recommend the title to your librarian.
If you already have i-manager's user account: Login above and proceed to purchase the article.
New Users: Please register, then proceed to purchase the article.