i-manager Publications

Modeling, Design and Analysis of Direct Space Vector Modulation Technique Based Three-Phase Matrix Converter for Different Loads

Ruksana S. K.*

Vasavi College of Engineering, Telangana, India.

Periodicity:January - March'2022
DOI : https://doi.org/10.26634/jee.15.3.18583

Abstract

This paper presents the modeling, design and analysis of Three Phase Matrix Converter (TPMC) using Direct Space Vector Modulation technique for the purpose of generation of gate pulses to the switches of the matrix converter. In this paper TPMC with different loads of resistive, Resistor- Capacitor (RC), Resistor-Inductor (RL) has been analyzed. TPMC converts Alternating Current (AC) input power to AC output power directly without the aid of DC link in between the conversion making the availability of the input power directly at the output without intermediate stage. The proposed TMPC with Space Vector Modulation technique possess several advantages compared with the convention converters & Sine Pulse Width Modulation (SPWM) technique. Any distortion or fluctuation in the input side of the converter can be easily depicted at the output side of the converter directly. The proposed topology has been implemented in the MATLAB/SIMULINK software and the desired results of the converter topology has been verified.

Keywords

Three Phase Matrix Converter, Direct Space Vector Modulation Technique, R, RC, RL Loads.

How to Cite this Article?

Ruksana, S. (2022). Modeling, Design and Analysis of Direct Space Vector Modulation Technique Based Three-Phase Matrix Converter for Different Loads. i-manager’s Journal on Electrical Engineering, 15(3), 25-31. https://doi.org/10.26634/jee.15.3.18583

References

[1]. Busse, D., Erdman, J., Kerkman, R. J., Schlegel, D., & Skibinski, G. (1997). Bearing currents and their relationship to PWM drives. IEEE Transactions on Power Electronics, 12(2), 243-252. https://doi.org/ 10.1109/63.558735

[2]. Casadei, D., Serra, G., & Tani, A. (1998). Reduction of the input current harmonic content in matrix converters under input/output unbalance. IEEE Transactions on Industrial Electronics, 45(3), 401-411. https://doi.org/10.1109/41.678998

[3]. Casadei, D., Serra, G., Tani, A., & Zarri, L. (2002). Matrix converter modulation strategies: A new general approach based on space-vector representation of the switch state. IEEE Transactions on Industrial Electronics, 49(2), 370-381. https://doi.org/ 10.1109/41.993270

[4]. Chen, S., Lipo, T. A., & Fitzgerald, D. (1996). Source of induction motor bearing currents caused by PWM inverters. IEEE Transactions on Energy conversion, 11(1), 25-32. https://doi.org/ 10.1109/60.486572

[5]. Durán, M. J., Riveros, J. A., Barrero, F., Guzmán, H., & Prieto, J. (2012). Reduction of common-mode voltage in five-phase induction motor drives using predictive control techniques. IEEE transactions on industry applications, 48(6), 2059-2067. https://doi.org/10.1109/TIA.2012.2226221

[6]. Erdman, J. M., Kerkman, R. J., Schlegel, D. W., & Skibinski, G. L. (1996). Effect of PWM inverters on AC motor bearing currents and shaft voltages. IEEE transactions on Industry Applications, 32(2), 250-259. https://doi.org/10.1109/28.491472

[7]. Hojabri, H., Mokhtari, H., & Chang, L. (2012). Reactive power control of permanent-magnet synchronous wind generator with matrix converter. IEEE Transactions on Power Delivery, 28(2), 575-584. https://doi.org/10.1109/TPWRD.2012.2229721

[8]. Kolar, J. W., Friedli, T., Rodriguez, J., & Wheeler, P. W. (2011). Review of three-phase PWM AC–AC converter topologies. IEEE Transactions on Industrial Electronics, 58(11), 4988-5006. https://doi.org/10.1109/TIE.2011.2159353

[9]. Nguyen, H. M., Lee, H. H., & Chun, T. W. (2010). Input power factor compensation algorithms using a new direct-SVM method for matrix converter. IEEE Transactions on Industrial Electronics, 58(1), 232-243. https://doi.org/10.1109/TIE.2010.2044736

[10]. Nguyen, H. N., & Lee, H. H. (2014, May). A new SVM method to reduce common-mode voltage in direct matrix converter. In 2014 International Power Electronics Conference (IPEC-Hiroshima 2014-ECCE ASIA), 1013-1020. https://doi.org/10.1109/IPEC.2014.6869711

If you have access to this article please login to view the article or kindly login to purchase the article

Single Article

	North Americas,UK, Middle East,Europe		India	Rest of world
	USD	EUR	INR	USD-ROW
Online	15	15

ADD TO CART

Options for accessing this content:

If you would like institutional access to this content, please recommend the title to your librarian.
If you already have i-manager's user account: Login above and proceed to purchase the article.
New Users: Please register, then proceed to purchase the article.