References
[1]. Abinay, A., & Sandeep, M. (2019). Fabrication and
analysis of aluminium based nano composites reinforced
with carbon nano tubes, In 3rd National Conference on
Recent Trends & Innovations in Mechanical Engineering,
RTIME 2K19, (pp.212-216). Retrieved from http://www.ijrat.
org/downloads/Conference_Proceedings/RTIME-19/
RT1932.pdf
[2]. Al-Salihi, H. A., Mahmood, A. A., & Alalkawi, H. J.
(2019). Mechanical and wear behavior of AA7075
aluminum matrix composites reinforced by Al2 O3
nanoparticles. Nanocomposites, 5(3), 67-73. https://doi.
org/10.1080/20550324.2019.1637576
[3]. Baradeswaran, A., & Perumal, A. E. (2014). Study on
mechanical and wear properties of Al 7075/Al2O3/
graphite hybrid composites. Composites Part B:
Engineering, 56, 464-471. https://doi.org/10.1016/j.com
positesb.2013.08.013
[4]. Bihari, B., Hasnain, R., & Singh, A. K. (2018). Study on
wear properties of Al7075/SiC/graphite hybrid
composites, International Journal of Engineering
Research & Technology, 7(1), 96-99.
[5]. Binoy, C. N., & Sijo, M. T. (2014). Effect of carbon
nanotubes addition on fracture toughness in aluminium
silicon carbide composite, International Journal of
Engineering Research and General Science, 2(6), 604-
612.
[6]. Cerrini, A., & Beretta, S. (2006). Failure investigation
and design improvements of Al 7075 piston for hydraulic
actuators. Engineering Failure Analysis, 13(1), 18-31.
https://doi.org/10.1016/j.engfailanal.2004.12.026
[7]. Dasgupta, R. (2012). Aluminium alloy-based metal
matrix composites: a potential material for wear resistant
applications. International Scholarly Research Notices.
https://doi.org/10.5402/2012/594573
[8]. Deng, C. F., Wang, D. Z., Zhang, X. X., & Li, A. B. (2007). Processing and properties of carbon nanotubes
reinforced aluminum composites. Materials Science and
engineering: A, 444(1-2), 138-145. https://doi.org/10.
1016/j.msea.2006.08.057
[9]. Gaurav, A., & Singh, K. K. (2018). Fatigue behavior of
FRP composites and CNT‐embedded FRP composites: A
review. Polymer Composites, 39(6), 1785-1808.
https://doi.org/10.1002/pc.24177
[10]. Gupta, S., Gupta, A., & Pratap, B. (2017).
Experimental investigation of mechanical properties of
bagasse ash and SiC reinforced Al 7075 alloy matrix
hybrid composites manufactured by stir casting method.
International Journal of Scientific and Engineering
Research, 8(12), 428-437.
[11]. Jen, Y. M., & Wang, Y. C. (2012). Stress concentration
e f f e c t o n t h e f a t i g u e p r o p e r t i e s o f c a r b o n
nanotube/epoxy composites. Composites Part B:
Engineering, 43(4), 1687-1694. https://doi.org/10.1016/j.
compositesb.2012.01.036
[12]. Kelly, A. (2008). Very stiff fibres woven into
engineering's future: a long-term perspective. Journal of
Materials Science, 43(20), 6578-6585. https://doi.org/10.
1007/s10853-008-2864-y
[13]. Kumar, B., Agarwal, T., & Dey, M. (2018). Fatigue
behaviour of CNT reinforced material matrix composites.
International Journal of Engineering Development and
Research, 6(2), 383.
[14]. Kumar, S., & Mishra, A. K. (2020). Review on effect of
reinforcement on stir casting aluminium metal matrix
composite, International Journal of Scientific and
Research Publications, 10(5), 196-204. https://doi.org/10.
29322/IJSRP.10.05.2020.p10123
[15]. Kumar, G. V., Rao, C. S. P., & Selvaraj, N. (2012).
Mechanical and dry sliding wear behavior of Al7075 alloyreinforced
with SiC particles. Journal of Composite
Materials, 46(10), 1201-1209. https://doi.org/10.1177/
0021998311414948
[16]. Manjunatha, A. R., Kumaran, P. S., Niranjan, H. B.,
Banakar, P., Basavarajappa, V. N. (2018). Study of wear
properties on aluminium alloy composite reinforced with
graphene, International Journal for Research in Applied Science & Engineering Technology, 6(3), 447-452.
[17]. Maqbool, A., Khalid, F. A., Hussain, M. A., & Bakhsh,
N. (2014). Synthesis of copper coated carbon nanotubes
for aluminium matrix composites. IOP Conference Series:
Materials Science and Engineering, 60(1), 012040.
https://doi.org/10.1088/1757-899X/60/1/012040
[18]. Moona, G., Walia, R. S., Rastogi, V., & Sharma, R.
(2020). Parametric optimization of fatigue behaviour of
hybrid aluminium metal matrix composites. Materials
Today: Proceedings, 21, 1441-1445. https://doi.org/10.
1016/j.matpr.2019.10.002
[19]. Patil, S., Haneef, M., & Narayanaswamy, K. S. (2019).
Effect of heat treatment on mechanical properties and
wear behavior of Al7075 alloy reinforced with beryl and
graphene hybrid metal matrix composites. International
Journal of Aerospace and Mechanical Engineering,
13(6), 399-406. https://doi.org/10.5281/zenodo.3299307
[20]. Ramanathan, A., Krishnan, P. K., & Muraliraja, R.
(2019). A review on the production of metal matrix
composites through stir casting–Furnace design,
properties, challenges, and research opportunities.
Journal of Manufacturing Processes, 42, 213-245.
https://doi.org/10.1016/j.jmapro.2019.04.017
[21]. Rana, R. S., Purohit, R., & Das, S. (2012). Reviews on
the influences of alloying elements on the microstructure
and mechanical properties of aluminum alloys and
aluminum alloy composites. International Journal of
Scientific and research publications, 2(6), 1-7.
[22]. Rao, V. R., Ramanaiah, N., & Sarcar, M. M. M. (2016).
Tribological properties of aluminium metal matrix
composites (AA7075 reinforced with titanium carbide
(TiC) particles). International Journal of Advanced
Science and Technology, 88(2016), 13-26. https://doi.
org/10.14257/ijast.2016.88.02
[23]. Salmaan, N. U., Smart, D. S. R., & Raja, S. A. (2020).
Analysis On Aluminium Hybrid Metal Matrix Composite
Reinforced With HfC, Si3N4 And MoS2 Nanoparticles.
International Journal of Mechanical and Production
Engineering Research and Development,10(3), 747-758.
[24]. Sharma, A., & Mishra, P. M. (2019). Effects of various
reinforcements on mechanical behavior of AA7075 hybrid composites. Materials Today: Proceedings, 18,
5258-5263. https://doi.org/10.1016/j.matpr.2019.07.526
[25]. Tyagi, L., Butola, R., & Jha, A. K. (2020). Mechanical
and tribological properties of AA7075-T6 metal matrix composite reinforced with ceramic particles and
aloevera ash via Friction stir processing. Materials
Research Express, 7(2020), 066526. https://doi.org/10.
1088/2053-1591/ab9c5e
