i-manager Publications

Implementation of Poly Crystalline Ferrite Material as Sensor for CO₂ Detection using Cypress CY8C29466 Based on SoC

Aparna M. Pawar*

Department of Electronics, Tuljaram Chaturchand College of Arts, Science and Commerce, Baramati, Maharashtra, India.

Periodicity:May - July'2021
DOI : https://doi.org/10.26634/jfet.16.4.18439

Abstract

Nowadays, to keep pace with requirements of smart instrumentation of various sectors and reduce the design time, the use of programmable system on-chip is the best solution. Moreover, use of mixed signal array based PSoC would be most suitable to design an embedded system with more preciseness. In present paper, the details regarding hardware and software co-design for embedded system, which is dedicated for detection and measurement of CO₂ gas are discussed. CO₂ sensor is prepared using polycrystalline ferrite material and deployed for detection. The system is designed with mixed signal based Cypress PSoC device CY8C29466-24PXI with PSoC Designer 5.1 as IDE. The high input impedance of on-chip PGA supports direct interfacing of CO₂ gas sensor, whereas on-chip ADC ensures the preciseness in the data. The system is implemented to detect the presence of CO₂ and could be extended to measure the concentration of CO₂ gas in percentage unit.

Keywords

Mixed Signal, PSoC, Polycrystalline Ferrite Material, CO Gas Sensor.

How to Cite this Article?

Pawar, A. M. (2021). Implementation of Poly Crystalline Ferrite Material as Sensor for CO₂ Detection using Cypress CY8C29466 Based on SoC. i-manager's Journal on Future Engineering and Technology, 16(4), 29-33. https://doi.org/10.26634/jfet.16.4.18439

References

[1]. Abreu, P., Aglietta, M., Ahn, E. J., Albuquerque, I. F. D. M., Allard, D., Allekotte, I., ... Bravo, O. M. (1998). Nuclear instruments & methods in physics research section aaccelerators spectrometers detectors and associated equipment. Integration the VLSI Journal, 26, 151-165.

[2]. Bissi, L., Placidi, P., & Scorzoni, A. (2007). Offset voltage evaluation of analog blocks in a configurable mixed architecture for smart capacitive sensor applications. Sensors and Actuators A: Physical, 140(2), 162-167.

[3]. Crepaldi, M., Casu, M. R., Graziano, M., & Zamboni, M. (2009). A mixed-signal demodulator for a lowcomplexity IR-UWB receiver: Methodology, simulation and design. Integration, 42(1), 47-60.

[4]. Cypress. (n.d.). Cypress Semiconductor.

[5]. de Albornoz, A. D. C., Munoz, D. R., Moreno, J. S., Berga, S. C., & Anton, E. N. (2008). A new gas sensor electronic interface with generalized impedance converter. Sensors and Actuators B: Chemical, 134(2), 591-596.

[6]. Doboli, A., & Currie, E. H. (2010). Introduction to Mixedsignal, Embedded Design. Springer Science & Business Media.

[7]. Kissinger, P., & Heineman, W. R. (2018). Laboratory Techniques in Electroanalytical Chemistry. CRC press.

[8]. Kraver, K. L., Gutnaus, M. R., Strong, T. D., Bird, P. L., Cha. G. S., Hold, W., & Brown, R. B. (2001). A mixed-signal sensor interface microinstrument. Sensors and Actuators A: Physical, 91(3), 266-277.

[9]. Patil, S. N., Ladgaonkar, B. P., & Pawar, A. M. (2019). Carbon dioxide gas sensing property of nickel substituted zinc ferrite. i-manager's Journal on Material Science, 7(2), 42-48.

[10]. Patil, S. N., Pawar, A. M., & Ladgaonkar, B. P. (2017). Synthesis and deployment of nanoferrites to design embedded system for monitoring of ammonia gas. International Journal of Advances in Engineering & Technology (IJAET), 6(1), 27-31.

[11]. Patil, S. N., Pawar, A. M., Tilekar, S. K., & Ladgaonkar, B. P. (2016). Investigation of magnesium substituted nano particle zinc ferrites for relative humidity sensors. Sensors and Actuators A: Physical, 244, 35-43.

[12]. Pawar, A. M., Patil, S. N., Powar, A. S., & Ladgaonkar, B. P. (2013). Wireless sensor network to monitor spatiotemporal thermal comfort of polyhouse environment. International Journal of Innovative Research in Science, Engineering and Technology, 2(10), 4866-4875.

[13]. Razavi, B., & Wooley, B. A. (1992). Design techniques for high-speed, high-resolution comparators. IEEE Journal of Solid-State Circuits, 27(12), 1916-1926.

[14]. Soma, M. (1998). Mixed-signal on-chip timing measurements. Integration, 26(1-2), 151-165.

[15]. Umbarkar, A., Subramanian, V., & Doboli, A. (2011). Low-cost sound-based localization using programmable mixed-signal systems-on-chip. Microelectronics Journal, 42(2), 382-395.

[16]. Yoon, H. J., Shin, J. H., Lee, S. D., Nam, H., Cha, G. S., Strong, T. D., & Brown, R. B. (2000). Solid-state ion sensors with a liquid junction-free polymer membrane-based reference electrode for blood analysis. Sensors and Actuators B: Chemical, 64(1-3), 8-14.

Implementation of Poly Crystalline Ferrite Material as Sensor for CO₂ Detection using Cypress CY8C29466 Based on SoC

Abstract

Keywords

How to Cite this Article?

References

If you have access to this article please login to view the article or kindly login to purchase the article

Purchase Instant Access

Options for accessing this content:

	North Americas,UK, Middle East,Europe		India	Rest of world
	USD	EUR	INR	USD-ROW
Pdf	35	35	200	20
Online	35	35	200	15
Pdf & Online	35	35	400	25

Implementation of Poly Crystalline Ferrite Material as Sensor for CO2 Detection using Cypress CY8C29466 Based on SoC

Abstract

Keywords

How to Cite this Article?

References

If you have access to this article please login to view the article or kindly login to purchase the article

Purchase Instant Access

Options for accessing this content:

Implementation of Poly Crystalline Ferrite Material as Sensor for CO₂ Detection using Cypress CY8C29466 Based on SoC