i-manager Publications

Effect of Sliding Speed on Tribological Behaviour of Heat Treated Hypoeutectic Al-7Si Alloy and Hybrid Metal Matrix Composites

Viswanatha B. M.*, Prasanna Kumar M.**, Basavarajappa S.***, Kiran T. S.****

*,**** Department of Mechanical Engineering, Kalpataru Institute of Technology, Tiptur, Karnataka, India.

** Department of Studies, University BDT College of Engineering, Davanagere, Karnataka, India.

*** IIT-Dharwad, Karnataka, India.

Periodicity:November - January'2022
DOI : https://doi.org/10.26634/jme.12.1.18395

Abstract

In the present paper, effect of sliding speed on wear behaviour of as-cast and heat treated hypoeutectic Al-7Si alloy and hybrid metal matrix composites have been investigated. Aluminium is used as matrix and Silicon Carbide (SiC) and graphite (Gr) particles are used as reinforcements. The proposed Aluminium Metal Matrix Composites (AMMCs) was fabricated by stir-cast method. Aluminium A356 matrix and reinforcements of SiCp was varied from 0 to 9% by weights in steps of 3%, and addition of fixed quantity of 3% by weight of Gr particles. The castings were machined as per ASTM standard and T6-heat-treatment was carried out. Specimens were aged at different durations from 3 to 12 hrs in steps of 3 hrs at a temperature of 155 ºC. The pin-on-disc wear testing machine was employed to evaluate the wear rate of the composites. As per the results, addition of reinforcement and aged at T6-9 hrs shows most wear resistance in all sliding tests. The increase in sliding speed with increase of wear rate was observed. The wear tested samples were examined using scanning electron microscope (SEM) and energy dispersive spectrum (EDS) and analysed.

Keywords

Sliding Speed, Composites, Ageing, SEM, EDS, Wear.

How to Cite this Article?

Viswanatha, B. M., Kumar, M. P., Basavarajappa, S., and Kiran, T. S. (2022). Effect of Sliding Speed on Tribological Behaviour of Heat Treated Hypoeutectic AL-7SI Alloy and Hybrid Metal Matrix Composites. i-manager’s Journal on Mechanical Engineering, 12(1), 13-20. https://doi.org/10.26634/jme.12.1.18395

References

[1]. Akhlaghi, F., & Zare-Bidaki, A. (2009). Influence of graphite content on the dry sliding and oil impregnated sliding wear behavior of Al 2024–graphite composites produced by in situ powder metallurgy method. Wear, 266(1- 2), 37-45. https://doi.org/10.1016/j.wear.2008.05.013

[2]. Basavarajappa, S., Chandramohan, G., Mahadevan, A., Thangavelu, M., Subramanian, R., & Gopalakrishnan, P. (2007). Influence of sliding speed on the dry sliding wear behaviour and the subsurface deformation on hybrid metal matrix composite. Wear, 262(7-8), 1007-1012. https://doi.org/10.1016/j.wear.2006.10.016

[3]. Basavarajappa, S., Chandramohan, G., Mukund, K., Ashwin, M., & Prabu, M. (2006). Dry sliding wear behavior of Al 2219/SiCp-Gr hybrid metal matrix composites. Journal of Materials Engineering and Performance, 15(6), 668-674. https://doi.org/10.1361/105994906X150803

[4]. Benal, M. M., & Shivanand, H. K. (2007). Effects of reinforcements content and ageing durations on wear characteristics of Al (6061) based hybrid composites. Wear, 262(5-6), 759-763. https://doi.org/10.1016/j.wear.2006.08. 022

[5]. Bindumadhavan, P. N., Chia, T. K., Chandrasekaran, M., Wah, H. K., Lam, L. N., & Prabhakar, O. (2001). Effect of particle-porosity clusters on tribological behavior of cast aluminum alloy A356-SiCp metal matrix composites. Materials Science and Engineering: A, 315(1-2), 217-226. https://doi.org/10.1016/S0921-5093(00)01989-4

[6]. Constantin, V., Scheed, L., & Masounave, J. (1999). Sliding wear of aluminum-silicon carbide metal matrix composites. ASME Journal of Tribology, 121(4), 787–794. https://doi.org/10.1115/1.2834136

[7]. De Salazar, J. G., & Barrena, M. I. (2004). Influence of heat treatments on the wear behaviour of an AA6092/SiC25p composite. Wear, 256(3-4), 286-293. https://doi.org/10.1016/S0043-1648(03)00389-2

[8]. Deuis, R. L., Subramanian, C., & Yellup, J. M. (1997). Dry sliding wear of aluminium composites: A review. Composites Science and Technology, 57(4), 415-435. https://doi.org/10.1016/S0266-3538(96)00167-4

[9]. Guo, J., & Yuan, X. (2009). The aging behavior of SiC/Gr/6013Al composite in T4 and T6 treatments. Materials Science and Engineering: A, 499(1-2), 212-214. https://doi. org/10.1016/j.msea.2007.11.142

[10]. Guo, M. T., & Tsao, C. Y. (2000). Tribological behavior of self-lubricating aluminium/SiC/graphite hybrid composites synthesized by the semi-solid powderdensification method. Composites Science and Technology, 60(1), 65-74. https://doi.org/10.1016/S0266- 3538(99)00106-2

[11]. Lin, C. B., Chang, R. J., & Weng, W. P. (1998). A study on process and tribological behavior of Al alloy/Gr(p) composite. Wear, 217(2), 167-174. https://doi.org/10.1016/S0043-1648(98)00192-6

[12]. Liu, Y. B., Hu, J. D., Cao, Z. Y., & Rohatgi, P. K. (1997). Wear resistance of laser processed Al–Si–graphitep composites. Wear, 206(1-2), 83-86. https://doi.org/10.1016/S0043-1648(96)07496-0

[13]. Rohatgi, P. K. (1993). Metal matrix composites. Defence Science Journal, 43(4), 323-349. https://doi.org/10.14429/DSJ.43.4336

[14]. Sahin, Y. (2007). Tribological behaviour of metal matrix and its composite. Materials & Design, 28(4), 1348-1352. https://doi.org/10.1016/j.matdes.2006.01.032

[15]. Sannino, A. P., & Rack, H. J. (1995). Dry sliding wear of discontinuously reinforced aluminum composites: Review and discussion. Wear, 189(1-2), 1-19. https://doi.org/10.1016/0043-1648(95)06657-8

[16]. Surappa, M. K., Prasad, S. V., & Rohatgi, P. K. (1982). Wear and abrasion of cast Al-alumina particle composites. Wear, 77(3), 295-302.

[17]. Tjong, S. C., Wu, S. Q., & Liao, H. C. (1998). Wear behaviour of an Al–12% Si alloy reinforced with a low volume fraction of SiC particles. Composites Science and Technology, 57(12), 1551-1558. https://doi.org/10.1016/S0266-3538(97)00074-2

[18]. Wilson, S., & Alpas, A. T. (1996). Effect of temperature on the sliding wear performance of Al alloys and Al matrix composites. Wear, 196(1-2), 270-278. https://doi.org/10.1016/0043-1648(96)06923-2

[19]. Wilson, S., & Alpas, A. T. (1997). Wear mechanism maps for metal matrix composites. Wear, 212(1), 41-49. https://doi.org/10.1016/S0043-1648(97)00142-7

[20]. Zhang, S., & Wang, F. (2007). Comparison of friction and wear performances of brake material dry sliding against two aluminum matrix composites reinforced with different SiC particles. Journal of Materials Processing Technology, 182(1-3), 122-127. https://doi.org/10.1016/j. jmatprotec.2006.07.018

Effect of Sliding Speed on Tribological Behaviour of Heat Treated Hypoeutectic Al-7Si Alloy and Hybrid Metal Matrix Composites

Abstract

Keywords

How to Cite this Article?

References

If you have access to this article please login to view the article or kindly login to purchase the article

Purchase Instant Access

Options for accessing this content:

	North Americas,UK, Middle East,Europe		India	Rest of world
	USD	EUR	INR	USD-ROW
Pdf	35	35	200	20
Online	35	35	200	15
Pdf & Online	35	35	400	25