References
[1]. Ali, E. A. (2001). Adding value to Waste in Nigeria: The
Ahmadu Bello University. International Journal of Science
Laboratory Technological (JOSCILT), 1(1), 9.
[2]. Aliprandi, G. (1979). Matériauxréfractaires et
Céramiques Techniques. Septima, Paris. Retrieved from
https://www.worldcat.org/title/materiaux-refractaires-etceramiques-
technique/oclc/932339460?referer=di&ht=
edition
[3]. Chester, J. H. (1973). Refractories, Production and
Properties. The iron and steel institute, London, 4(13), 295-
315.
[4]. Djangang, C. N., Kamseu, E., Elimbi, A., Lecomte, G. L.,
& Blanchart, P. (2014). Net-shape clay ceramics with glass
waste additive. Materials Sciences and Applications, 5(8),
592-602. https://doi.org/10.4236/msa.2014.58061
[5]. Dondi, M., Guarini, G., Raimondo, M., & Zanelli, C.
(2009). Recycling PC and TV waste glass in clay bricks and
roof tiles. Waste Management, 29(6), 1945-1951. https://
doi.org/10.1016/j.wasman.2008.12.003
[6]. Garkida, A. D., Opoku, E. V., & Ahuwan, A. M. (2004).
Recycling Waste Window Glasses in Ceramic Glazes as an
Alternative to Feldspar. Ashakwu Journal of Ceramics,
Ceramics Association of Nigeria Zaria, 1(2), 39-42.
[7]. Gonah, C. M., Garkida, A.D., Abede, A. A., Fwatmwol, A. D., & Attah, G. (1997). GlassCasting. In 15th National
Annual Conference of the Institute of Science and
Technology, Kaduna.
[8]. Hwang, J. Y., Huang, X., Garkida, A., & Hein, A. (2006).
Waste colored glasses as sintering aid in ceramic tiles
production. Journal of Minerals & Materials
Characterization & Engineering, 5(5), 119-129.
[9]. Johari, I., Said, S., Hisham, B., Bakar, A., & Ahmad, Z. A.
(2010). Effect of the change of firing temperature on
microstructure and physical properties of clay bricks from
Beruas (Malaysia). Science of Sintering, 42(2), 245-254.
https://doi.org/10.2298/SOS1002245J
[10]. Johnson, J. L., & German, R. (1996). Solid State
Sintering in the Presence of a Liquid Phase in Sintering
Technology. In German R. L., Messing, G. L., & Cornwall, R.
C. (Eds.). Mercel Dekker Inc New York, pp.237.
[11]. Oti, J. E., & Kinuthia, J. M. (2012). Stabilised unfired
clay bricks for environmental and sustainable use. Applied
Clay Science, 58, 52-59. https://doi.org/10.1016/j.clay.
2012.01.011
[12]. Rambaldi, E., Carty, W. M., Tucci, A., & Esposito, L.
(2007). Using waste glass as a partial flux substitution and pyroplastic deformation of a porcelain stoneware tile body.
Ceramics International, 33(5), 727-733. https://doi.org/10.
1016/j.ceramint.2005.12.010
[13]. Rozenstrauha, I., Bajare, D., Cimdins, R., Berzina, L.,
Bossert, J., & Boccaccini, A. R. (2006). The influence of
various additions on a glass-ceramic matrix composition
based on industrial waste. Ceramics International, 32(2),
115-119. https://doi.org/10.1016/j.ceramint.2005.01.006
[14]. Ryan, W. (1978). Clay and Glazes for Potter. Pitman,
London.
[15]. Sultana, M. S., Ahmed, A. N., Zaman, M. N., Rahman,
M. A., Biswas, P. K., & Nandy, P. K. (2015). Utilization of hard
rock dust with red clay to produce roof tiles. Journal of Asian
Ceramic Societies, 3(1), 22-26. https://doi.org/10.1016/j.
jascer.2014.10.005
[16]. Ukrainskii, L. Z. (1982). Rapid control method for water
absorption of ceramic tiles. Glass and Ceramics, 39(2), 82-
84. https://doi.org/10.1007/BF00696059
[17]. Zhang, L. (2013). Production of bricks from waste
materials–A review. Construction and Building Materials,
47, 643-655. https://doi.org/10.1016/j.conbuildmat.2013.
05.043