References
[1]. Åström, K. J., Hang, C. C., Persson, P., & Ho, W. K.
(1992). Towards intelligent PID control. Automatica, 28(1),
1-9. https://doi.org/10.1016/0005-1098(92)90002-W
[2]. Baszynski, M., & Pirog, S. (2013). A novel speed
measurement method for a high-speed BLDC motor
based on the signals from the rotor position sensor. IEEE
Transactions on Industrial Informatics, 10(1), 84-91.
https://doi.org/10.1109/TII.2013.2243740
[3]. Cui, C., Liu, G., Wang, K., & Song, X. (2014). Sensorless
drive for high-speed brushless DC motor based on the
virtual neutral voltage. IEEE Transactions on Power
Electronics, 30(6), 3275-3285. https://doi.org/10.1109/
TPEL.2014.2337292
[4]. Er, P. V., Cao, R., Liang, W., Yang, R., Teo, C. S., & Tan, K.
K. (2014). Selective approach towards robust control and
accommodation of disturbances. International Journal of
Mechatronics and Automation, 4(3), 161-172. https://
doi.org/10.1504/IJMA.2014.064097
[5]. Eti, S. L., & Kumar, N. P. (2014). Closed loop speed
control of a BLDC motor drive using adaptive fuzzy tuned PI
controller. International Journal of Engineering Research
and Applications, 4(11), 93-104.
[6]. Ji, H., & Li, Z. (2009). Modelling and simulation of control system for brushless DC motor. International Journal
of Modelling, Identification and Control, 7(4), 346-350.
https://doi.org/10.1504/IJMIC.2009.027887
[7]. Kaliappan, E. (2015). Modelling, analysis and
simulation of permanent magnet brushless DC motors for
sensorless operation. International Journal of Power and
Energy Conversion, 6(3), 234-251. https://doi.org/
10.1504/IJPEC.2015.070466
[8]. Kim, T. H., & Ehsani, M. (2004). Sensorless control of the
BLDC motors from near-zero to high speeds. IEEE
Transactions on Power Electronics, 19(6), 1635-
1645.https://doi.org/10.1109/TPEL.2004.836625
[9]. Merugumalla, M. K., & Kumar, N. P. (2017). Optimized
PID controller for BLDC motor using Nature-inspired
Algorithms. International Journal of Applied Engineering
Research, 12(1), 415-422.
[10]. Merugumalla, M. K., & Kumar, N. P. (2018). FFA-based
speed control of BLDC motor drive. International Journal of
Intelligent Engineering Informatics, 6(3-4), 325-342. https://
doi.org/10.1504/IJIEI.2018.091877
[11]. Merugumalla, M. K., & Navuri, P. K. (2016). Sensorless
control of BLDC motor using bio-inspired optimization
algorithm and classical methods of tuning PID controller. i-
Manager's Journal on Instrumentation & Control
Engineering, 5(1), 16-23. https://doi.org/10.26634/jic.5.1.
10349
[12]. Merugumalla, M. K., & Navuri, P. K. (2019). Chaotic
inertia weight and constriction factor-based PSO algorithm
for BLDC motor drive control. International Journal of
Process Systems Engineering, 5(1), 30-52. https://doi.org/
10.1504/IJPSE.2019.096673
[13]. Nikranjbar, A. (2014). Adaptive PID controller design
guidelines for a class of non-linear systems. International
Journal of Engineering Systems Modelling and Simulation,
6(1-2), 12-22. https://doi.org/10.1504/IJESMS.2014.058419
[14]. Papadopoulos, K. G. (2015). PID Controller Tuning
using the Magnitude Optimum Criterion. Heidelberg:
Springer International Publishing.
[15]. Stirban, A., Boldea, I., & Andreescu, G. D. (2012).
Motion-sensorless control of BLDC-PM motor with offline
FEM-information-assisted position and speed observer. IEEE Transactions on Industry Applications, 48(6), 1950-1958.
https://doi.org/10.1109/TIA.2012.2226194
[16]. Taeib, A., & Chaari, A. (2015). Tuning optimal PID
controller. International Journal of Modelling, Identification
and Control, 23(2), 140-147. https://doi.org/10.1504/IJMIC.
2015.068872
[17]. Vrančić, D., Juričić, D., Strmčnik, S., & Hanus, R.
(1999a). Closed-loop tuning of PID controller using MOMI
method. Proceedings of the 1999 American Control
Conference (pp. 3352-3356). https://doi.org/10.1109/
ACC.1999.782386
[18]. Vrančić, D., Peng, Y., & Strmčnik, S. (1999b). A new PID
controller tuning method based on multiple integrations.
Control Engineering Practice, 7(5), 623-633. https://
doi.org/10.1016/S0967-0661(98)00198-1
[19]. Vrančić, D., Strmčnik, S., & Juričić, D. (2001). A
magnitude optimum multiple integration tuning method
for filtered PID controller. Automatica, 37(9), 1473-1479.
https://doi.org/10.1016/S0005-1098(01)00088-7
[20]. Vrančić, D., Strmčnik, S., Kocijan, J., & de Moura
Oliveira, P. B. (2010). Improving disturbance rejection of PID
controllers by means of the magnitude optimum method.
ISA Transactions, 49(1), 47-56. https://doi.org/10.1016
/j.isatra.2009.08.002
