References
[1]. Bharadwaj, R., Gaur, M. K., Agrawal, S., & Chaturvedi,
V. (2018). Simultaneous optimization of multiple
performance characteristics in MIG welding for machining
AISI-304 stainless steel by weighted principle component
analysis. Journal of Experimental & Applied Mechanics,
9(3), 77-85.
[2]. Cawley, P. (2001). Non-destructive testing-current
capabilities and future directions. Proceedings of the
Institution of Mechanical Engineers, Part L: Journal of
Materials: Design and Applications, 215(4), 213-223.
https://doi.org/ 10.1177%2F146442070121500403
[3]. Dwivedi, S. K., Vishwakarma, M., & Soni, A. (2018).
Advances and researches on non destructive testing: A
review. Materials Today: Proceedings, 5(2), 3690-3698.
https://doi.org/ 10.1016/j .matpr.2017.11.620
[4]. Gandhe, E. S., Aher, V. S., & Wakchaure, V. D. (2019a).
Analysis & FEA simulation for effect of throat thickness on
MIG welded joint strength. International Journal of
Research and Scientific Innovation (IJRSI), 6(9), 39-44.
[5]. Gandhe, E. S., Aher, V. S., & Wakchaure, (2019b).
Parametric optimization of mig welding process to improve
its tensile strength. EPRA International Journal of Research
and Development (IJRD), 4(9), 75-82
[6]. Ghosh, N., Pal, P. K., & Nandi, G. (2016). Parametric
optimization of gas metal arc welding process by PCAbased
Taguchi method on ferritic stainless steel AISI409.
Materials Today: Proceedings, 4(9), 9961-9966. https://doi.
org/10.1016/j.matpr.2017.06.302
[7]. Ghosh, N., Pal, P. K., & Nandi, G. (2017). GMAW dissimilar welding of AISI 409 ferritic stainless steel to AISI
316L austenitic stainless steel by using AISI 308 filler wire.
Engineering Science and Technology, an International
Journal, 20(4),1334-1341. https://doi.org/10.1016 /j.jestch.
2017.08.002
[8]. Hardness Test of Welds (2006). Hardness of Welds
Retrieved from https://fdocuments.in/document/hardness
-test-of-welds.html
[9]. Hooda, A., Dhingra, A., & Sharma, S. (2012).
Optimization of MIG welding process parameters to
predict maximum yield strength in AISI 1040. International
Journal of Mechanical Engineering and Robotics
Research (IJMERR), 1(3), 203-213.
[10]. Kalita, D., & Barua, P. B. (2015). Taguchi optimization of
MIG welding parameters affecting tensile strength of C20
welds. International Journal of Engineering Trends and
Technology, 26, 43-49.
[11]. Kanakavalli, P. B., Babu, B. N., & Sai, C. P. V. (2019). A
hybrid methodology for optimizing MIG welding process
parameters in joining of dissimilar metals. Materials Today:
Proceedings (pp.1-6). https://doi.org10.1016/j.matpr.2019
05. 396
[12]. Kodgire, V. D., & Kodgire, S. V. (2011). Material
Science & Metallurgy for Engineers (30th Ed.). Everest
Publishing House.
[13]. Kumar, S., & Mahto, D. G. (2013). Recent trends in
industrial and other engineering applications of non
destructive testing: A review. International Journal of
Scientific & Engineering Research, 4(9), 183-195.
[14]. Meena, S. L., Butola, R., Murtaza, Q., Jayantilal, H., &
Niranjan, M. S. (2017). Metallurgical investigations of
microstructure and micro hardness across the various
zones in synergic MIG welding of stainless steel. Materials
Today: Proceedings, 4(8), 8240-8249. https://doi.org/
10.1016/j.matpr.2017.07.166
[15]. Microscopes, Drawing Appliances, and
Measurement. (n.d). Retrieved from http://www
.biologydiscussion.com/botany/practicals-botany/micros
copes-drawing-appliances-and-measure ment/57063.
[16]. Naik, A. B., & Reddy, A. C. (2018). Optimization of tensile strength in TIG welding using the Taguchi method
and Analysis of Variance (ANOVA). Thermal Science and
Engineering Progress, 8, 327-339. https://doi.org/10.1016/
j.tsep.2018.08.005
[17]. Pavani, P., Sivasankar, P., Lokanadham, P., &
Mhahesh, P. U. (2015). Finite element analysis of residual
stress in butt welding of two similar plates. International
Research Journal of Engineering and Technology, 2(7),
479-486.
[18]. Rao, P. S., Gupta, O. P., Murty, S. S. N., & Rao, A. K.
(2009). Effect of process parameters and mathematical
model for the prediction of bead geometry in pulsed GMA
welding. The International Journal of Advanced
Manufacturing Technology, 45(5-6), 496-505. https://doi.
org/10.1007/s00170-009-1991-1
[19]. Sen, R., Choudhury, S. P., Kumar, R., & Panda, A.
(2018). A comprehensive review on the feasibility study of
metal inert Gas Welding. Materials Today: Proceeding, 5(9), 17792-17801. https://doi.org/10.1016/j.matpr.2018.0
6.104
[20]. Shveyov, A., Shveyov, I., Kazantsev, R., Shveyova, E.,
& Shveyova, T. (2017). The study of hardness of welded
joints of parts in the automotive industry. International
Journal of Applied Engineering Research, 12(6), 912-917.
[21]. Sivaraman, A., & Paulraj, S. (2017). Multi-response
optimization of process parameters for MIG welding of
AA2219-T87 by Taguchi Grey relational analysis. Materials
Today: Proceedings, 4(8), 8892-8900. https://doi.org/
10.1016/j.matpr.2017.07.240
[22].TGN-PE-01-Hardness Testing of Welds. (n.d.).
Retrieved from https://wtia.com.au/wp-content/upl
oads/2015/02/TGN-PE-01-Hardness-testing-of-Welds.pdf.
[23]. Zhou, M. (2019). Effect of laser-MIG hybrid welding on
microstructure and properties of seismic steel plate for
buildings. Results in Physics, 12, 840-845. https://doi.org/10
.1016/j.rinp.2018.12.054
