i-manager Publications

Study of RC Beam Column Joint under Seismic Loading

Palak S. Agrawal*, Varsha R. Harne**, Vinay G. Popli***

*-*** Department of Structural Engineering, Shri Ramdeobaba College Engineering and Management, Nagpur, Maharashtra, India.

Periodicity:June - August'2019
DOI : https://doi.org/10.26634/jste.8.2.16175

Abstract

In any structure, beam column joints are the most critical element, when it is subjected to earthquake loading, but in most of the construction works beam column joints are not designed. Therefore, in earthquake prone area the failure of structure occurred due to beam column joint effect. Hence, it is very essential to design any structure by considering the effect of beam column joint. The aim of this work is to improve the strength of beam column joint and its ductile behavior. In this research work, seismic behavior of various types of joints like exterior, interior and corner were studied by using finite element software ANSYS. Numerical analysis is carried out using ANSYS software. Beam column joints are designed as per IS 13920- 2016. The most important factors affecting the shear capacity of exterior RC beam-column joints are concrete compressive strength, the joint aspect ratio of the joints and number of lateral ties inside the joint. Behaviour of beam column joint with beam weak in flexure and observed stresses in joints also studied. It is observed that exterior joints are more affected as compared to other type of joint by considering the effect of stress.

Keywords

Stress Intensity, Beam-Column Joint, Finite Element, Deformation, Shear Stress

How to Cite this Article?

Agrawal, P. S., Harne, V. R., & Popli, V. G. (2019). Study of RC Beam Column Joint under Seismic Loading, i-manager's Journal on Structural Engineering, 8(2), 1-8. https://doi.org/10.26634/jste.8.2.16175

References

[1]. Bindhu, K. R., Sukumar, P. M., & Jaya, K. P. (2009). Performance of exterior beam-column joints under seismic type loading. ISET Journal of Earthquake Technology, 46(2), 47-64.

[2]. BIS. (2000). Plain and reinforced concrete – code of practice (fourth revision), (IS 456-2000) New Delhi, India.

[3]. BIS. (2016). Criteria for earthquake resistant design of structures, (IS 1893:2016), New Delhi, India.

[4]. BIS. (2016). Ductile detailing of Reinforced concrete structures subjected to seismic forces- Code of practice, (IS 13920 2016), New Delhi, India.

[5]. Kavitha, S., & Kala, T. F. (2019). Investigations on seismic behavior of bamboo fibre reinforced self compacting concrete exterior beam column joint. i-manager's Journal on Civil Engineering, 9(2), 31-36. https://doi.org/10.26634/ jce.9.2.14713

[6]. Kulkarni, S. A., & Li, B. (2008). Seismic behavior of reinforced concrete interior wide-beam column joints. Journal of Earthquake Engineering, 13(1), 80-99. https://doi.org/10.1080/13632460802211941

[7]. Kulkarni, S. M., & Patil, Y. D. (2014). Cyclic behavior of exterior reinforced beam-column joint with cross-inclined column bars. IOSR Journal of Mechanical and Civil Engineering, 11(4), 9-17.

[8]. Li, B., & Leong, C. L. (2014). Experimental and numerical investigations of the seismic behavior of highstrength concrete beam-column joints with column axial load. Journal of Structural Engineering, 141(9), https://doi.org/10.1061/(ASCE)ST.1943-541X.0001191

[9]. Li, B., Tran, C. T. N., & Pan, T. (2009). Experimental and numerical investigations on the seismic behaviour of lightly reinforced concrete beam-column joints. Journal of Structural Engineering, 135(9), https://doi.org/10.1061/ (ASCE)ST.1943-541X.0000040

[10]. Manjunath, H. R., & Prabhakara, R. (2018). Ansys Analysis of High Strength Concrete Beams. i-manager's Journal on Structural Engineering, 7(4), 1-6. https://doi.org/10.26634/jste.7.4.15483

[11]. Marthong, C., Dutta, A., & Deb, S. K. (2016). Effect of cyclic loading frequency on the behavior of external RC beam-column connections. Journal of Earthquake Engineering, 20(7), 1126-1147. https://doi.org/10.1080/13632469.2016.1138164

[12]. Mounica, K., & Raju, P. P. (2018). Numerical and experimental study on RC exterior beam column joint with beam weak in flexure. International Journal of Engineering & Technology, 7 (2.20), 313-320. https://doi.org/10.14419/ijet.v7i1.20.16724

[13]. Nath, N. K., & Jeyashree, T. M. (2016). Analytical study on reinforced concrete beam column Joint wrapped with CFRP. International Journal of Advanced Structures and Geotechnical Engineering (Vol. 05).

[14]. Shabana, T. S., Abubaker, K. A., Varghees, R. (2015). Finite Element Analysis of Beam Column Joint with GFRP under Dynami Loading. International Journal of Engineering Trends and Technology (IJETT), 28(8), 374- 379.

[15]. Uma, S. R., & Jain, S. K. (2006). Seismic design of beam-column joints in RC moment resisting frames- Review of codes. Structural Engineering and Mechanics, 23(5), 579-597. https://doi.org/10.12989/sem.2006.23.5. 579

Study of RC Beam Column Joint under Seismic Loading

Abstract

Keywords

How to Cite this Article?

References

If you have access to this article please login to view the article or kindly login to purchase the article

Purchase Instant Access

Options for accessing this content:

	North Americas,UK, Middle East,Europe		India	Rest of world
	USD	EUR	INR	USD-ROW
Pdf	35	35	200	20
Online	35	35	200	15
Pdf & Online	35	35	400	25