i-manager Publications

Application of Vibration on Heat Transfer- A Review

Santosh Kumar Mishra*, Aruna Arora**, H. Chandra***

*-** Bhilai Institute of Technology, Durg, Chhattisgarh, India.

*** VEC Lakhanpur, Ambikapur, Chhattisgarh, India.

Periodicity:August - October'2019
DOI : https://doi.org/10.26634/jfet.15.1.15877

Abstract

Vibration on the flow system has great effects in terms of heat transfer augmentation and uniformity in temperature across the section of circular pipe. In this paper, effect of vibration on the flow system has been summarised for different flow condition for Newtonian fluid, non-Newtonian fluid, and compound effect of vibration and nanofluid. Effect of flow velocity, vibration amplitude, vibration frequency, and rheology of fluid on the heat transfer enhancement has been presented under the vibration. Vibration could be able to reduce boundary layer veryswiftly and it promotes radial mixing of fluid because of the secondary velocity component on the flow system.It has been found that nanofluid application under vibration could be able to increase heat transfer 300% than the steady-state flow.

Keywords

Nanofluid, Newtonian fluid, non-Newtonian fluid, frequency, vibration.

How to Cite this Article?

Mishra, S., K., Arora, A., and Chandra, H.(2019). Application of Vibration on Heat Transfer- A Review. i-manager’s Journal on Future Engineering and Technology , 15(1), 72-81. https://doi.org/10.26634/jfet.15.1.15877

References

[1]. Alaei, A., Kafshgari, M. H. & Atashi, H. (2012). A new designed heat pipe: An experimental study of the thermal performance in the presence of low-frequency vibrations. Heat Mass Transfer, Volume 48, 719-723.

[2]. Almohammadi, H., Nasirivatan, S., Esmaeilzadeh, E., Motezakker, A., & Nokhosteen, A. (2012). Experimental investigation of convective heat transfer and pressure drop of Al₂O₃/Water Nanofluid in laminar flow regime inside a Circular Tube. International Journal of Mechanical and Mechatronics Engineering, 6(8), 1750- 1755.

[3]. Bash, A., Alkumait, A. & Yaseen, H. (2018). Experimental investigation of the influence of mechanical forced vibrations and heat flux on coefficient of heat transfer. Science Journal of University of Zakho, 6(3), 124-129.

[4]. Chen, R. H., Lin, Y. J. & Lai, C. M. (2013). The influence of horizontal longitudinal vibrations and the condensation section temperature on the heat transfer performance of a heat pipe. Heat Transfer Engineering, 34(1), 45-53.

[5]. Choi, S.U.S., & Eastman, J.A. (1995). Enhancing Thermal Conductivity of Fluids with Nanoparticles, In D. A. Siginer and H. P. Wang (Eds.) Developments and applications of non - Newtonian flow, American Society of Mechanical Engineers, New York, (pp. 99-105).

[6]. Davarnejad, R., Barati, S., & Kooshki, M. (2013). CFD simulation of the effect of particle size on the nanofluids convective heat transfer in the developed region in a circular tube. SpringerPlus, 2(1), 192.

[7]. Deshpande, N. S., Barigou, M. (2001). Vibrational flow of non-newtonian fluids. Chemical Engineering Science, 56(12), 3845-3853.

[8]. Eesa, M., & Barigou, M. (2008). CFD analysis of viscous non-Newtonian flow under the influence of a superimposed rotational vibration. Computers and Fluids, 37(1), 24-34.

[9]. Eesa, M., & Barigou, M. (2010). Enhancing radial temperature uniformity and boundary layer development in viscous Newtonian and non-Newtonian flow by transverse oscillations: A CFD study. Chemical Engineering Science, 65(6), 2199-2212.

[10]. Eesa, M., & Barigou, M. (2011). CFD simulation of transverse vibration effects on radial temperature profile and thermal entrance length in laminar flow. AIChE journal, 57(1), 51-56.

[11]. Eesa, M. (2009). CFD Studies of Complex Fluid Flows in Pipes (Doctoral dissertation) University of Birmingham.

[12]. Eid, E. I., & Gomaa, M. E. (2009). Influence of vibration in enhancement of heat transfer rates from thin plannar fins. Heat and Mass Transfer, 45(6), 713-726.

[13]. Guler, O. F., Guven, O., & Aktas, M. K. (2019). Heat transfer enhancement by sinusoidal motion of a waterbased Nanofluid. Journal of Thermal Science and Engineering Applications, 11(4), 041001.

[14]. Hobbs, D. M., & Muzzio, F. J. (1997). The Kenics static mixer: A three-dimensional chaotic flow. Chemical Engineering Journal, 67(3), 153-166.

[15]. Hojjat, M., Etemad, S. G., & Bagheri, R. (2010). Laminar heat transfer of non-Newtonian nanofluids in a circular tube. Korean Journal of Chemical Engineering, 27(5).

[16]. Hojjat, M., Etemad, S. G., Bagheri, R. & Thibault, J. (2011). Convective heat transfer of non-Newtonian nanofluids through a uniformly heated circular tube. International Journal of Thermal Sciences, 50(4), 525- 531.

[17]. Hosseinian, A., Isfahani, A. M. & Shirani, E. (2018). Experimental investigation of surface vibration effects on increasing the stability and heat transfer coefficient of MWCNTs-water nanofluid in a flexible double pipe heat exchanger. Experimental Thermal and Fluid Science, Volume 90, 275-285.

[18]. Illbeigi, M., & Nazar, A., S. (2017). Numerical simulation of laminar convective heat transfer and pressure drop of water based-Al₂O₃ nanofluid as a non newtonian fluid by Computational Fluid Dynamic (CFD). Transp Phenom Nano Micro Scales, 5(2), 130-138.

[19]. Jung, A., & Fryer, P. J. (1999). Optimising the quality of safe food: computational modelling of a continuous sterilisation process. Chemical Engineering Science, 54(6), 717-730.

[20]. Kim, D. H., Lee, Y. H., & Chang, S. H. (2007). Effects of mechanical vibration on critical heat flux in vertical annulus tube. Nuclear Engineering and Design, 237(9), 982-987.

[21]. Klaczak, A. (1997). Report from experiments on heat transfer by forced vibrations of exchangers. Heat and Mass transfer, 32(6), 477-480.

[22]. Lee, Y. H., & Chang, S. H. (2003). The effect of vibration on critical heat flux in a vertical round tube. Journal of Nuclear Science and Technology, 40(10), 734- 743.

[23]. Lee, Y. H., Kim, D. H., & Chang, S. H. (2004). An experimental investigation on the critical heat flux enhancement by mechanical vibration in vertical round tube. Nuclear Engineering and Design, 229(1), 47-58.

[24]. Liu, W., Yang, Z., Zhang, B., & Lv, P. (2017). Experimental study on the effects of mechanical vibration on the heat transfer characteristics of tubular laminar flow. International Journal of Heat and Mass Transfer, 115(Part A), 169-179.

[25]. Mishra, S. K., Chandra, H., & Arora, A. (2019a). Effect of velocity and rheology of nanofluid on heat transfer of laminar vibrational flow through a pipe under constant heat flux. International Nano Letters, 12(2), 50-62.

[26]. Mishra, S. K., Chandra, H., & Arora, A. (2019b). Effects on heat transfer and radial temperature profile of non- isoviscous vibrational flow with varying Reynolds number. Journal of Applied Fluid Mechanics, 12(1), 135- 144.

[27]. Mishra, S. K., Chandra, H., & Arora, A. (2019c). Effects on thermal entrance length of non-Newtonain nanofluid under vibrational flow. International Journal of Technical Innovation in Modern Engineering and Science, 5(2), 50-55.

[28]. Moraveji, M. K., Darabi, M., Haddad, S. M. H., & Davarnejad, R. (2011). Modeling of convective heat transfer of a nanofluid in the developing region of tube flow with computational fluid dynamics. International Communications in Heat and Mass Transfer, 38(9), 1291- 1295.

[29]. Saatdjian, E., Rodrigo, A. J. S., & Mota, J. P. B. (2012). On chaotic advection in a static mixer. Chemical Engineering Journal, 187, 289-298.

[30]. Sathyabhama, A., & Prashanth, S. P., (2015). Enhancement of boiling heat transfer using surface vibration. Heat transfer - Asian research, 46(1), 49-60.

[31]. Sekrani, G., & Poncet, S. (2016). Further investigation on laminar forced convection of nanofluid flows in a uniformly heated pipe using direct numerical simulations. Applied Sciences, 6(11), 1-24.

[32]. Sharma, K. V., Sundar, L. S., & Sarma, P. K. (2009). Estimation of heat transfer coefficient and friction factor in the transition flow with low volume concentration of Al2O3 nanofluid flowing in a circular tube and with twisted tape insert. International Communications in Heat and Mass Transfer, 36(5), 503-507.

[33]. Shrirao, P. N., Sambhe, R. U., & Bodade, P. R. (2013). Convective heat transfer analysis in a circular tube with different types of internal threads of constant pitch. International Journal of Engineering and Advanced Technology, 2(3), 335-340.

[34]. Sukarno, D. H. (2017, January). Challenges for nanofluid applications in heat transfer technology. In Journal of Physics: Conference Series, 795(1), 1-6. IOP Publishing.

[35]. Tian, S., & Barigou, M. (2015). An improved vibration technique for enhancing temperature uniformity and heat transfer in viscous fluid flow. Chemical Engineering Science, 123, 609-619.

[36]. Tian, S. (2015). CFD Modelling of Oscillatory Perturbed Advection in Viscous Flows. (Doctoral dissertation), University of Birmingham, Birmingham, UK.

[37]. Wen, D., & Ding, Y. (2004). Experimental investigation into convective heat transfer of nanofluids at the entrance region under laminar flow conditions. International Journal of Heat and Mass Transfer, 47(24), 5181-5188.

[38]. Xuan, Y., & Li, Q. (2000). Heat transfer enhancement of nanofluids. International Journal of Heat and Fluid Flow, 21(1), 58-64.

[39]. Yu, K., Park, C., Kim, S., Song, H., & Jeong, H. (2017, August). CFD Analysis of nanofluid forced convection heat transport in laminar flow through a compact pipe. In Journal of Physics: Conference Series, 885(1), 1-7. IOP Publishing.

[40]. Zhang, L., Lv, J., Bai, M., & Guo, D. (2014). Effect of vibration on forced convection heat transfer for SiO₂ –water nanofluids. Heat Transfer Engineering, 36(5), 452-461.

Application of Vibration on Heat Transfer- A Review

Abstract

Keywords

How to Cite this Article?

References

If you have access to this article please login to view the article or kindly login to purchase the article

Purchase Instant Access

Options for accessing this content:

	North Americas,UK, Middle East,Europe		India	Rest of world
	USD	EUR	INR	USD-ROW
Pdf	35	35	200	20
Online	35	35	200	15
Pdf & Online	35	35	400	25