Modelling And Impact Of Compact Fluorescent Lamps On Distribution System

A N Malleswara Rao*, K. Ramesh Reddy**, Sanker Ram***
* Research Scholar, J N T University Hyderabad, India.
** Dean & HOD, Department of EEE, G. Narayanamma Institute of Technology and Science, Hyderabad.
*** Professor, Department of EEE, J N T University, Hyderabad, India
Periodicity:October - December'2011
DOI : https://doi.org/10.26634/jee.5.2.1573

Abstract

Compact fluorescent lamps (CFLs) are increasingly being used in households and commercial buildings because of the desire to reduce electricity usage. CFLs are nonlinear, which raises concerns over the widespread use of CFLs due to possible adverse effects on harmonic voltage levels in the distribution system. A MAT LAB model of a simple CFL ballast circuit is shown to match actual CFL current waveforms and is used to assess the interactions between multiple CFLs connected to an electrical network. This work shows the error of using fixed harmonic current injection to model CFLs in a distribution system. Finally, the concept of CFL tensor analysis with phase dependency is introduced.

Keywords

Compact Fluorescent Lamp, Harmonic Behaviour

How to Cite this Article?

A. N. Malleswara Rao, K. Ramesh Reddy and B. V. Sanker Ram (2011). Simulation Comparison of Class D/ Class E Inverter Fed Induction Heating. i-manager’s Journal on Electrical Engineering, 5(2), 1-7. https://doi.org/10.26634/jee.5.2.1573

References

[1]. R.R. Verderber, O.C. Morse, & W.R. Alling, (1993). "Harmonics from compact fluorescent lamps,” IEEE Transaction on Industry Application, Vol. 29, No 3, May- June pp. 670-674.
[2]. R. Arseneau, M. Ouellette, (1993). "The effects of supply harmonics on the performance of compact fluorescent lamps,” IEEE Transactions on Power Delivery, Vol. 8,No. 2, April. pp. 670-674.
[3]. F.V. Topalis, (1993). "Efficiency of Energy Saving Lamps and Harmonic Distortion in Distribution System,” IEEE Transactions on Power Delivery, Vol. 8, No. 4, Oct. pp. 2038-2042.
[4]. N. R. Watson, D. Chuah, M. B. Dewe and S. Hirsch, (1995). “Harmonic Performance of Standard And Compact Fluorescent Lamps”, Proc. IPENZ Conference, pp. 119-122, Palmerston North, New Zealand.
[5]. N.R. Watson and S. Hirsch, (1994). “The Impact of Compact Fluorescent Lamps on Power Quality ”, Proceedings of Conference of the Electric Power Supply Industry (CEPSI), Christchurch, Sept., pp. 416-428.
[6]. M. Ponce, A.J. Marinez, J. Correa, M. Cotorogea, J. Arau, (2006). "High–Efficient Integrated Electronic Ballast for Compact Fluorescent Lamps,” IEEE Transactions on Power Delivery, Vol. 21, No. 2, March.
[7]. H.L. Cheng, C.S. Moo, H.C. Yen, T.F. Lin, S.H. Huang, (2001). “Single switch high-power-factor electronic ballast for compact fluorescent lamps,” Power Electronics and Drive Systems, 2001. Proceedings, 2001 4th IEEE International Conference on Vol. 2, 22-25 Oct. pp. 764- 769.
[8] Y Kato, Y. Okamura, T. Kuratani, S. Takahashi, L. Yokozeki, (2004). "Development of the back-boost inverter suitable for compact lamp," Power Electronics System and Applications, Proceedings. 2004 First International Conference.
[9]. E. Embriz-Santander, A. Domijan and C. W. Williams, (1995). "A comprehensive harmonic study of electronic ballasts and their effect on a utility's 12 kV, 10 MVA feeder,” IEEE Transactions on Powe r Delivery, Vol 10, No.3, July pp. 1591-1599.
[10]. D.J. Pileggo, E.M. Gulachenski, C.E. Root, T.J. Gentile and A.E. Emanual, "The effect of Modern Compact Fluorescent Lights on Voltage Distortion,” IEEE Transactions on Power Delivery, Vol. 8, No. 3, July 1993. pp. 1451-1459.
[11]. N. R. Watson, T. Scott, and S. Hirsch, (2006). “Compact Fluorescent Lamps (CFL) - Implications for Distribution Networks,” Proceedings of EEA Conference, Auckland, New Zealand, June,
[12]. N.Z. Govt., (1981). Electricity Regulations 1997 (based on Ministry of Commerce, Limitation Levels Notice.
[13]. AS/NZS 61000.3.2:2003, (2003). Electromagnetic compatibility (EMC) Part 3.2: Limits -Limits for harmonic current emissions (equipment input current less than or equal to 16 A per phase), Australian/New Zealand Standard,
[14]. M. Fauri, (1997). “Harmonic Modeling of non-linear load by means of crossed frequency admittance matrix,” IEEE Transaction on Power Systems, Vol.12, No. 4, November.
[15]. Y. Sun, G. Zhang, W. Xu, and J. Mayordomo, (2007). "A harmonically coupled admittance matrix model for ac/dc converters,” IEEE Transaction on Power Systems, Vol. 22, No. 4, November .
[16]. B. Smith, N. Watson, A. Wood, and J. Arrillaga, (1998). "Harmonic tensor linearization of HVDC converter,” IEEE Transaction on Power Delivery, Vol.13, No. 4, pp. 1244-1250, Oct.
[17]. G. Kron, (1939). Tensor Analysis of Networks. John Wiley and Sons Inc.
If you have access to this article please login to view the article or kindly login to purchase the article

Purchase Instant Access

Single Article

North Americas,UK,
Middle East,Europe
India Rest of world
USD EUR INR USD-ROW
Online 15 15

Options for accessing this content:
  • If you would like institutional access to this content, please recommend the title to your librarian.
    Library Recommendation Form
  • If you already have i-manager's user account: Login above and proceed to purchase the article.
  • New Users: Please register, then proceed to purchase the article.