References
[1]. D.M. Stetanescu, (1992). ASM Metals Handbook Volume 15, Casting, ASM International, The Materials Information Company.
[2]. A. Reis., Zhan xu., Rob Van Tol., A.D. Santos., A. Barbedo Mayalhoos., (2005). ASM Metals Handbook Volume 15, Casting, ASM International, The Materials Information Company Modeling of the Underpressure Occurring During the Shrink Porosity Formation, Viii International Conference On Computational Plasticity, Complas Viii, E. Oñate And D. R. J. Owen (Eds), Cimne, Barcelona.
[3]. Simulating Porosity in Ductile Iron Castings, Calcom SA, Parc Scientifique EPFL, CH-1015 Lausanne, Switzerland, phone: +41 21 693 2918 / fax: +41 21 693 4740, mail@calcom.ch / www.calcom.ch
[4]. P. Scarber., Jr. & H., Littleton., (2008). Simulation of Macro-porosity in Aluminium lost foam castings, Paper 08-145, AFS Transactions, pages 1061-1068.
[5]. Arno Louvo & Matti Sirrio (1994). Use of Simulated Porosity for Avoidance of Casting Defects, VTT Manufacturing Technology, Finland Presented at World Foundry Conference in Düsseldorf, Germany.
[6]. S. Sundarrajan., H.Md. Roshan. & E. G. Ramachandran., (1984). Studies on shrinkage characteristics of binary Mg-Al alloys, Transactions of the Indian Institute of Metals, Vol.37, No.4, August.
[7]. John R. Brown. (2008). Foseco Non-Ferrous Foundry man's Handbook, Eleventh edition, Revised and Butterworth Heinemann publisher.
[8]. A. Kielbus. (2007). The influence of casting temperature on castability and structure of AJ62 alloy, Archives of Materials Science and Engineering, Volume 28 Issue 6, June , Pages 345-348.
[9]. Virtual casting user manual
[10]. A. Pani Kishore & T. S Prasanna Kumar. (2004). Fixing Boundary Conditions For Solidification Simulation of Aluminium Alloy Plate Casting, International Symposium of Research Students on Material Science and Engineering, December 20-22, Chennai, India, Department of Metallurgical and Materials Engineering, Indian Institute of Technology Madras.
[11]. A Boundary Condition Coupling Strategy for the Modeling of Metal Casting Processes, Michael Trovant, National Library of Canada, Acquisitions and Bibliographic Services, 395 Wellington Street, Ottawa ON K1AON4, Canada, 1998.
[12]. M. Venkataramana., V. Vasudeva Rao., R. Ramgopal Varma., & S. Sundarrajan. (2008). Instrumentation to Measure Heat Transfer Coefficient at the Metal Mold Interface, J. Instrum. Soc. India 37(3) 157-163.
[13]. G.S. Cellini., L. Tomesani. (2008). Metal head – Dependent HTC in sand casting simulation of aluminium alloys, Journal of Achievements in Materials and Manufacturing Engineering, Volume 29 Issue 1 July.
[14]. Fiorello Losano., Gabriella Marinsek., Alberto Maria Marlo., Miriam Ricci. (1999). Computer Tomography in the Automotive Field Development of new engine Head case study, DGZfP Proceedings BB 67-CD, Paper 10.
