i-manager Publications

Z-Source Isolated Boost Dc-Dc Converter For Electrolyser Application Using Renewable Energy

R. Samuel Rajesh Babu*, Joseph Henry**

* Research Scholar, Department of EEE, Sathyabama University, Chennai.

** Professor, Department of EEE, Vel Tech University, Chennai, India.

Periodicity:July - September'2011
DOI : https://doi.org/10.26634/jee.5.1.1559

Abstract

With the increased compulsory usage of renewable energy resources, it is essential to efficiently use the energy produced from them. Such energy can be stored in fuel cells which work on the basis of electrolysis. A DC-DC converter is required to couple the electrolyser to the system DC bus. This paper is based on a new approach for achieving very high conversion efficiency in low-voltage high-power isolated boost DC-DC converter. The proposed DC-DC converter is realized in half-bridge topology in the rectifier side to achieve zero voltage switching for the power switches and to regulate the output voltage. Z-Source inverter is utilized to realize inversion and boost function in one single stage. In this DC-DC Converter the winding losses and the switch conduction losses are reduced. The transformer eddy-current and proximity effects are analyzed. The MATLAB simulation results show that the output of converter is free from the ripples and regulate the output voltage. The experimental results are verified to validate the simulation results. The ability to boost and buck voltage makes the Z-Source inverter very attractive for electrolyser application.

Keywords

Z-source Inverter, Power Conditioning System, Utility Interface, Renewable Energy, Switched-mode Power Supply

How to Cite this Article?

R. Samuel Rajesh Babu, and Joseph Henry (2011). Z-Source Isolated Boost DC-DC Converter For Electrolyser Application Using Renewable Energy. i-manager’s Journal on Electrical Engineering, 5(1), 32-40. https://doi.org/10.26634/jee.5.1.1559

References

[1]. E.H. Wakefield (1998). History of the Electric Automobile, Warrendale, PA: Society of Automotive Engineers, Inc, .

[2]. E. Koutroulis, K.Kalaitzakis & N.C. Voulgaris, (2001). “Development of a microcontroller-based, photovoltaic maximum power point tracking control system”, IEEE Trans. power Electronics., Vol.16, pp. 46-54, Jan.

[3]. Fang Zheng Peng (2003). ”Z-Source Inverter”, IEEE Trans. on Indutry Applications., Vol. 39,No. 2 , pp. 504–510 , March/April.

[4]. Miaosen Shen, Jin Wang, Alan Joseph, Fang Z. Peng, Leon M. Tolbert, and Donald J. Adams, (2004). “Maximum constant boost control of the Z source inverter.” in Proc. IEEE IAS'04, pp.142.

[5]. Frede Blaabjerg, Zhe Chen, S.B.Kjaer, (2004). “Powerelectronics as efficiency interface in dispersed power generation systems”, IEEE Trans. on Power Electronics, Vol.19, No.5, Sep-Oct, pp.1184-1194.

[6]. Shen, M.; Joseph, A.; Wang, J.; Peng, F.Z.;Adams, D.J., (2005). “Comparison of traditional inverters and ZSource inverter”, in Conf. Rec. of IEEE Power Electronics Specialist Conference, pp.1692-1698, June.

[7]. Kent Holl &, Miaosen Shen, Fang Z. Peng, (2005). “Zsource inverter control for traction drive of fuel cell - battery hybrid vehicles” Record of IEEE Industry Applications Conference, 2005 Vol 3, 2-6 Oct., pp.1651 – 1656.

[8]. Y. Huang; M. Shen; F. Z. Peng; J. Wang; “A Z-Source (2006). Inverter for Residential Photovoltaic Systems”, IEEE Transaction on Power Electronics, Vol. 21, No. 6, pp. 1776- 1782, Nov.

[9]. W. Song & B. Lehman, (2007). “Current-fed dualbridge DC–DC converter,” IEEE Trans. Power Electron., Vol. 22, No. 2, pp. 461–469, Mar.

[10]. H. Xiao & S. Xie, (2008). “A ZVS bidirectional DC–DC converter with phase shift plus PWM control scheme,” IEEE Trans. Power Electron., Vol. 23, No. 2, pp. 813–823, Mar. .

[11]. J.-M. Kwon, E.-H. Kim, B.-H. Kwon, & K.-H. Nam, (2009). “High-efficient fuel cell power conditioning system with input current ripple reduction,” IEEE Trans. Ind. Electron., Vol. 56, No. 3, pp. 826–834, Mar.

[12]. Morten & Michael A.E. Andersen (2010). “High- Efficiency Isolated Boost DC-DC Converter for High-PowerLow-Voltage Fuel-Cell Applications”. IEEE Trans. Ind.Electron., Vol. 57, No.2, pp.505-514, Feb.

	North Americas,UK, Middle East,Europe		India	Rest of world
	USD	EUR	INR	USD-ROW
Pdf	35	35	200	20
Online	35	35	200	15
Pdf & Online	35	35	400	25

Z-Source Isolated Boost Dc-Dc Converter For Electrolyser Application Using Renewable Energy

Abstract

Keywords

How to Cite this Article?

References

If you have access to this article please login to view the article or kindly login to purchase the article

Purchase Instant Access

Options for accessing this content: