i-manager Publications

Predictive Current Control for Zero D-Axis Current Control of PMSG Based Wind Energy Conversion System

Tripura Pidikiti *, G. Tulasi Ram Das **

* Assistant Professor, Department of Electrical and Electronics Engineering, RVR & JC College of Engineering, Guntur, Andra Pradesh,India.

** Professor, Department of Electrical and Electronics Engineering, Jawaharlal Nehru Technological University College of Engineering, Hyderabad, India.

Periodicity:May - July'2018
DOI : https://doi.org/10.26634/jps.6.2.15295

Abstract

In this paper, the Predictive Current Control (PCC) strategy for back-to-back (BTB) voltage source converters used in Permanent Magnet Synchronous Generator (PMSG), Wind Energy Conversion System (WECS) was explained. PCC is used to control the system, where the discrete time models of the BTB converters are used to predict the future state of control variables. Two cost functions are used to evaluate these predictions, and switching states which will minimize these cost functions will be selected and applied to generator side and grid side converter. The control requirements like Maximum Power Point Tracking (MPPT), Direct Current (DC) link voltage regulation and reactive power generation to the grid are satisfied by the PCC approach. Complete procedure for the MATLAB/Simulink implementation of predictive model, extrapolation and cost function employed in the implementation of PCC scheme are presented along with the comparison of the performance of Wind Energy Conversion System (PMSG WECS) and back-to-back (BTB) converter with conventional control technique.

Keywords

Permanent Magnet Synchronous Generator (PMSG), Voltage Oriented Control (VOC), Zero d-axis Current Control (ZDC), Predictive Current Control (PCC),Wind Energy Conversion System (WECS), Back-to-Back (BTB).

How to Cite this Article?

Pidikiti, T., and Das, G.T.R. (2018). Predictive Current Control for Zero D-Axis Current Control of PMSG Based Wind Energy Conversion System. i-manager’s Journal on Power Systems Engineering, 6(2), 20-27. https://doi.org/10.26634/jps.6.2.15295

References

[1]. Calle-Prado, A., Alepuz, S., Bordonau, J., Nicolas- Apruzzese, J., Cortés, P., & Rodriguez, J. R. (2015). Model Predictive Current Control of Grid-Connected Neutral- Point-Clamped Converters to Meet Low-Voltage Ride- Through Requirements. IEEE Trans. Industrial Electronics, 62(3), 1503-1514.

[2]. Chinchilla, M., Arnaltes, S., & Burgos, J. C. (2006). Control of permanent-magnet generators applied to variable-speed wind-energy systems connected to the grid. IEEE Transactions on Energy Conversion, 21(1), 130- 135.

[3]. Koutroulis, E., & Kalaitzakis, K. (2006). Design of a maximum power tracking system for wind-energy-conversion applications. IEEE Transactions on Industrial Electronics, 53(2), 486-494.

[4]. Liserre, M., Cardenas, R., Molinas, M., & Rodriguez, J. (2011). Overview of multi-MW wind turbines and wind parks. IEEE Transactions on Industrial Electronics, 58(4), 1081-1095.

[5]. Polinder, H., Ferreira, J. A., Jensen, B. B., Abrahamsen, A. B., Atallah, K., & McMahon, R. A. (2013). Trends in wind turbine generator systems. IEEE Journal of Emerging and Selected Topics in Power Electronics, 1(3), 174-185.

[6]. Rodriguez, J., Pontt, J., Silva, C. A., Correa, P., Lezana, P., Cortés, P., & Ammann, U. (2007). Predictive current control of a voltage source inverter. IEEE Transactions on Industrial Electronics, 54(1), 495-503.

[7]. Van, T. L., Nguyen, T. H., & Lee, D. C. (2015). Advanced pitch angle control based on fuzzy logic for variable-speed wind turbine systems. IEEE Transactions on Energy Conversion, 30(2), 578-587.

[8]. Vazquez, S., Rodriguez, J., Rivera, M., Franquelo, L. G., & Norambuena, M. (2017). Model predictive control for power converters and drives: Advances and trends. IEEE Transactions on Industrial Electronics, 64(2), 935-947.

[9]. Wang, J., Xu, D., Wu, B., & Luo, Z. (2011). A low-cost rectifier topology for variable-speed high-power PMSG wind turbines. IEEE Transactions on Power Electronics, 26(8), 2192-2200.

[10]. Yaramasu, V., & Wu, B. (2016). Model Predictive Control of Wind Energy Conversion Systems (Vol. 55). John Wiley & Sons.

[11]. Yaramasu, V., Dekka, A., Durán, M. J., Kouro, S., & Wu, B. (2017). PMSG-based wind energy conversion systems: survey on power converters and controls. IET Electric Power Applications, 11(6), 956-968.

[12]. Yaramasu, V., Wu, B., & Chen, J. (2014). Model-predictive control of grid-tied four-level diode-clamped inverters for high-power wind energy conversion systems. IEEE Transactions on Power Electronics, 29(6), 2861-2873.

[13]. Yaramasu, V., Wu, B., Sen, P. C., Kouro, S., & Narimani, M. (2015). High-power wind energy conversion systems: State-of-the-art and emerging technologies. Proceedings of the IEEE, 103(5), 740-788.

Predictive Current Control for Zero D-Axis Current Control of PMSG Based Wind Energy Conversion System

Abstract

Keywords

How to Cite this Article?

References

If you have access to this article please login to view the article or kindly login to purchase the article

Purchase Instant Access

Options for accessing this content:

	North Americas,UK, Middle East,Europe		India	Rest of world
	USD	EUR	INR	USD-ROW
Pdf	35	35	200	20
Online	35	35	200	15
Pdf & Online	35	35	400	25